Nostalgia Electrics LPF-210 User guide

Brand: Nostalgia Electrics

Model: LPF-210

Type: User guide

LPF210

Lighted Party Fountain

Instructions and Recipes

Instructions et Recettes

Instrucciones y Recetas

ENGLISH

SAFETY

Appliance Speciﬁcations:

120 Volts, 60 Hz

24 Watts, ETL Approved

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and

on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards

that can kill or hurt you and others.

All safety messages will follow the safety alert symbol.

All safety messages will tell you what the potential hazard

is, tell you how to reduce the chance of injury, and tell you

what can happen if the instructions are not followed.

CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . .3

IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . .3

INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . .4

PARTS & ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . .5

HOW TO OPERATE . . . . . . . . . . . . . . . . . . . . . . . .6

HELPFUL TIPS . . . . . . . . . . . . . . . . . . . . . . . . . .7

CLEANING & MAINTENANCE . . . . . . . . . . . . . . . . . .7

RECIPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

RETURNS & WARRANTY . . . . . . . . . . . . . . . . . . . . .9

ENGLISH

IMPORTANT PRECAUTIONS

NEVER use an abrasive sponge or cloth on the unit.1.

NEVER leave unit unattended while in use.2.

NEVER place anything other than the intended ingredients in the Beverage Bowl.3.

NEVER use near water.4.

Unplug unit from outlet when not in use and when cleaning.5.

DO NOT operate this appliance with a damaged cord or plug 6.

nor in the event the appliance ever malfunctions.

DO NOT put Lighted Base in dishwasher.

Keep out of reach of children.8.

This appliance is NOT A TOY.9.

This appliance is not intended for use by unsupervised young 10.

children nor cognitively challenged individuals.

Young children should be supervised while product is in use

11.

to ensure that they do not play with the appliance.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions

should always be followed, including:

Read all instructions before operating this appliance.1.

DO NOT TOUCH moving parts.2.

To protect against electrical shock do not immerse cord, plug nor 3.

any part of the Lighted Base in water or other liquids.

Close supervision is necessary when any appliance is used by or near children.4.

Unplug from outlet when not in use and before removing parts for cleaning.5.

DO NOT operate any appliance with a damaged cord or plug nor 6.

if the appliance has been damaged in any manner. Return the

appliance to the nearest repair shop for examination or repair.

The manufacturer does not recommend the use of accessory 7.

attachments. Use of attachments may cause injuries.

DO NOT use outdoors.

DO NOT let the cord touch hot surfaces.9.

Extreme caution must be used when moving this appliance.10.

This unit must be on a level surface to operate properly.11.

DO NOT use this appliance for other than its intended use.12.

DO NOT leave unit unattended while in use or when plugged in to an outlet.13.

DO NOT attempt to open Lighted Base. There are no serviceable parts. 14.

The light and cord that comes with this product cannot be replaced.

ENGLISH

Make sure unit is unplugged before assembling.15.

DO NOT attempt to reﬁll nor add more liquid to the Beverage 16.

Bowl while the motor is running. Turn unit OFF ﬁrst.

A short power supply cord is provided to reduce the risk resulting

17.

from becoming entangled or tripping over a long cord.

Extension cord can be used if care is exercised in use.18.

The marked electrical rating of an extension cord should be at 19.

least as great as the electrical rating of the appliance.

This appliance has a polarized plug (one blade is wider than

20.

the other). To reduce the risk of electrical shock, this plug is

intended to ﬁt into a polarized outlet only one way.

Keep hands and foreign objects out of the fountain while it is running. Regularly 21.

check the Beverage Bowl to make sure that it is clear of chunks of fruit,

pulp, etc. as they will clog the fountain and liquid will not ﬂow properly.

SAVE THESE INSTRUCTIONS!22.

INTRODUCTION

Thank you for purchasing The LIGHTED PARTY FOUNTAIN. This

product creates a beautiful display for any fun occasion. Friends and

family will enjoy watching the lighted cascade of beverage. They can

serve themselves from the Extension Spouts - no ladle is needed.

You can use a variety of beverages with your LIGHTED

PARTY FOUNTAIN. Try the following:

Various Juice Drinks•

Premixed Beverges•

Champagne Punch•

Lemonade•

Iced Tea•

The LIGHTED PARTY FOUNTAIN is a beautiful addition to any

dining table and is an impressive display at events such as:

Weddings•

Birthdays•

Graduation Parties•

Business Meetings•

Holidays•

Please take care of your machine by following these simple instructions.

ENGLISH

PARTS & ASSEMBLY

Your LIGHTED PARTY FOUNTAIN requires little assembly. Prior to

use, wipe down outside of Lighted Base with a damp cloth and dry.

Wash remaining parts in warm soapy water, rinse, then dry.

Do not attempt to assemble parts while the motor is running.

Always assemble parts while unit is unplugged.

ASSEMBLY

ASSEMBLY OF UNIT

See above for order of parts. Each part is designed •

to ﬁt securely as photo above outlines.

There are two Splash Guards. One Splash Guard ﬁts into the First •

Tier Bowl and the other ﬁts into the Second Tier Bowl

Lower Tier Bowl

Splash Guard

Upper Tier Bowl

Splash Guard

Crown Topper

Splash Guard

First Tier Bowl

Short Rod #1

Second Tier Bowl

5 Extension Spouts

2 Spare Extension Spouts

Long Rod #2

Beverage Bowl

Splash Guard

Lighted Base

ENGLISH

Secure the Splash Guards in place by inserting •

them into the pegs on each Tier Bowl.

There are seven total Extension Spouts. Two of the Extension Spouts •

are spare parts in case any Extension Spouts are lost or damaged.

TOGGLE SWITCH

ON/OFF

HOW TO OPERATE

Wipe out the Beverage Bowl with a damp, non-abrasive cloth and •

dry. Wash Crown Topper, Splash Guard, Rods, Tier Bowls and

Extension Spouts in warm, soapy water, rinse then dry.

After cleaning the unit, assemble the LIGHTED PARTY •

FOUNTAIN Make sure the parts are ﬁtted together tightly

and the fountain feels sturdy and is properly aligned.

Find a stable surface near an electrical outlet. Unit must be level to operate •

properly and to create the desired ﬂowing effect. Make sure your cord is away

from any water source. If needed, it is acceptable to use an extension cord.

Add beverage (LIGHTED PARTY FOUNTAIN holds 144 ounces of liquid) and •

ﬁll to the line on the inside of the Beverage Bowl. DO NOT ﬁll above the line.

Plug unit in and turn on by ﬂipping the toggle switch on the Lighted Base.•

The liquid will begin to rise up the Rods, ﬁlter through the Tier •

Bowls and trickle out of the Extension Spouts. At this time, adjust

the Tier Bowls and Extension Spouts to desired ﬂow.

Cups can be ﬁlled by holding them under the Extension •

Spouts as the beverage trickles out.

ENGLISH

As the beverage level decreases, it is advisable to reﬁll the •

Beverage Bowl and keep it at the maximum ﬁll level for best results.

Make sure that unit is turned OFF before adding liquid.

The LIGHTED PARTY FOUNTAIN must remain level to ensure •

proper ﬂow of beverage. Be careful not to drop pieces of food

into the Beverage Bowl which would clog the ﬂow of liquid.

HELPFUL TIPS

If the fountain is not ﬂowing, check the plug to •

make sure that it is secure in the outlet.

If the fountain is ﬂowing unevenly, the unit is not level. Make sure that the unit is •

on a level surface so that the liquid is being evenly distributed in the Tier Bowls.

If the ﬂow is intermittent, interrupted or not ﬂowing properly, check •

to see if there are chunks of fruit or pulp in the Beverage Bowl of

the Lighted Base that may be clogging the ﬂow of liquid.

If there is excessive splashing, make sure the Splash Guards are in place •

in the ﬁrst and second Tier Bowls and that they are securely attached to

the pegs. Make sure that the Extension Spouts are properly inserted.

In case of splashing, place fountain on waterproof surface or table •

covering to protect furniture and to avoid staining of table cloth.

CLEANING & MAINTENANCE

To prolong the life of your LIGHTED PARTY FOUNTAIN be

sure to follow cleaning instructions after every use. Handwash

ONLY. Not recommended for the dishwasher.

Make sure unit is unplugged before cleaning.

Pour out any leftover beverage from the Beverage Bowl.2.

To make cleaning of the LIGHTED PARTY FOUNTAIN 3.

easier, carefully disassemble the fountain parts.

Wash in warm, soapy water, rinse and dry.4.

ENGLISH

RECIPES

For best results when making juice, punch or carbonated beverages:

Do not use juices with pulp such as: orange, lemon, lime and grapefruit.•

Do not use 100% carbonated drinks such as champagne, sparkling wine or •

soda. Too much carbonation will prevent the fountain from ﬂowing properly.

When using carbonated beverages, ﬁrst make sure to add no more than •

two parts non-carbonated drink to one part carbonated drink.

Always ﬁll Beverage Bowl with non-carbonated drink ﬁrst.•

Turn unit on after adding non-carbonated drink.•

After the unit is running, slowly add the carbonated beverage.•

The clearer the liquid, the better the lights show.•

For a champagne or soda punch: mix 4 parts fruit •

punch to 2 parts champagne or soda.

ENGLISH

RETURNS & WARRANTY

SHOULD YOUR UNIT NOT WORK OR IS DAMAGED WHEN

YOU FIRST TAKE IT OUT OF THE BOX PLEASE RETURN

IT TO THE PLACE OF PURCHASE IMMEDIATELY.

LIGHTED PARTY FOUNTAIN / LPF210

Should you have any questions, please contact us via email or at the

customer service number listed below between the hours of 8:00 AM

and 5:00 PM, Monday through Friday, Central Standard Time.

Distributed by:

Nostalgia Products Group LLC

1471 Partnership Dr.

Green Bay, WI 54304-5685

Customer Service

Phone: (920) 347-9122

Web: www.nostalgiaelectrics.com

Customer Service Inquiry

To submit a Customer Service inquiry, go to www.nostalgiaelectrics.com and

ﬁll out the Customer Service Inquiry form and click the Submit button.

A representative will contact you as soon as possible.

This appliance is designed and built to provide many years of satisfactory

performance under normal household use. The distributor pledges to the

original owner that should there be any defects in material or workmanship

during the ﬁrst 90 days of purchase, we will repair or replace the unit at

our option. Our pledge does not apply to damages caused by shipping,

mishandling or unit being dropped. A product deemed defective either from

manufacturing or being mishandled is up to the distributor’s discretion.

In order to obtain service under this warranty, please contact Nostalgia

Products Group, LLC at the telephone number listed above or by ﬁlling out

the Customer Service Inquiry Form located at www.nostalgiaelectrics.com.

This warranty does not apply to re-manufactured merchandise.

Please read these instructions carefully. Failure to comply with these instructions,

damages caused by improper replacement parts, abuse or misuse will void this

pledge to you and is being made in place of all other expressed warranties.

Page is loading ...

Nostalgia Electrics LPF-210 User guide

Brand: Nostalgia Electrics

Model: LPF-210

Type: User guide

Download PDF

report

in other languages

français: Nostalgia Electrics LPF-210 Mode d'emploi
español: Nostalgia Electrics LPF-210 Guía del usuario

Nostalgia Electrics LPF-210 User guide

Nostalgia Electrics LPF-210 User guide

in other languages

Related papers

Other documents