Combo USB LAN Hub
Dual internal or external installation
User Manual
Ver.1.00
All brand names and trademarks are properties of their respective owners.
Product Intro
This Combo USB LAN Hub is the perfect combination of a USB2.0 HUB and a USB 2.0 card. It
features one upstream, three downstream USB 2.0 interface, and a USB 2.0 network port. This
Hub can be used in desktops, notebook PCs, Ultra-Mobile PCs, docking stations, game consoles,
multifunction printers, and digital-home appliances.
USB 2.0 Hub
1. Fully compliant with Universal Serial Bus Specification Revision 2.0
2. Supports USB HS (480Mbps), FS(12Mbps) and LS (1.5Mbps) modes
3. Three downstream ports and one upstream port with integrated USB 2.0 transceivers
4. Multiple Transaction Translator (MTT) provides respective TT control logics for each
downstream port
5. Supports one suspend LED indicator and three downstream port status LED indicator
6. Downstream ports support power management and over-current detection in both individual
and gang modes
7. Supports compound-device (non-removable in downstream ports) by I/O pin configuration
8. Improves output drivers with slew-rate control for EMI reduction
9. Internal power-fail detection for ESD recovery
USB 2.0 10/100M Fast Ethernet Card
1. Integrates 10/100Mbps Fast Ethernet MAC/PHY
2. IEEE 802.3 10Base-T/100Base-TX compatible
3. Supports twisted pair crossover detection and auto-correction (HP Auto-MDIX)
4. Supports both Full-duplex with flow control and Half-duplex with backpressure operation
5. MAC/PHY loop-back diagnostic capability
6. Supports Wake-on-LAN Function
7. Supports Suspend mode and Remote Wakeup via Link-up, Magic packet, MS wakeup frame
8. Optional PHY power down during Suspend mode
9. High performance packet transfer rate over USB bus using proprietary burst transfer
mechanism (US Patent Approval)
10. Supports USB to Ethernet bridging or vice versa in hardware
Asix AX88760 Chipset
12MHz and 25Mhz clock input
DC 5V power input
on-chip power-on reset circuit Integrated
Operating temperature range: 0°C to 70°C
Supports : Windows 2000/ 2003/ XP/ Vista / Win 7/ Win CE/ Mac OS X/ Linux / Android
Windows Driver Installation Guide
1. Connect the Ethernet adapter to a free USB port.
2. The "Found New Device" message will appear and at the "Found New Hardware Wizard",
Select “yes, this time only”, and click Next.
3. Insert the CD driver disc into your CD ROM, and select “Install from a list or specific
location (Advanced)” and click “Next”
4. Select “Install from a list or specific location” and click “Next”
5. Select “Search for the best driver in these locations” and “Include this location in the
6. search”. Click “Next”. (Specify the location as below. Windows x32
OS:“[CD-ROM]:\88760\Windows\XP2K\XP2K_32bit”
7. Press the “Finish” button . This will complete the installation for the Ethernet adapter.
8. The driver installation is now complete, you should be able to see the "ASIX
AX88772A USB2.0 to Fast Ethernet Adapter " in the network adapter list. If the Driver
was installed successfully, you will see "Driver installed successfully."
Mac OS X Drivers Installation Guide
Follow the instructions to install ：
[CD-ROM]:\88760\Mac
-
1
-
2
-
3
-
4
