S G F □ - F □ □ □ - 0 - □
Option
0: No option needed, 2: Moisture-proof treatment
Power supply
100 to 240 V AC
Output 2 (for SGFW only)
Output 1
Input
Series name
SGF: 1-output SGFW: 2-outputs
SGFL: 1-output + Serial communication
(For detailed input/output spec, refer to the full Instruction Manual.)
SET
key
for 5 sec
SET
key
Frequency
range group
setting
mode
setting
mode
setting
mode
setting
mode
Communication
setting
display
setting mode
key
for 3 sec
key
Frequency
high limit
key
Decimal
point place
key
value for
input low limit
key
value for
key
Indication
unit
key
Save
settings
key
Output 1
division
one-shot output
pulse width
Normal/
Save
settings
Indication
time
Auto/Manual
auto return
Save
settings
Instrument
number
Communication
speed
Data bit/
Parity
Stop bit
Response
delay time
Save
settings
Multi-Display
A
Multi-Display
B
Save
settings
Default Display
Default Display
Default Display
Default Display
Default Display
Manual mode
Manual mode
auto return
time has elapsed.
key
key
key
for 3 sec
key
key
key
for 3 sec
SET
key
SET
key
SET
key
SET
key
SET
key
key
for 3 sec
key
key
key
key
key
key
key
key
key
key
key
for 3 sec
key
key
key
key
for 3 sec
Default Display
RUN display
mode
key
Custom display
mode 1
Custom display
mode 2
Unlit
display mode
All unlit
display mode
Model display
mode
key
key
key
key
key
Output 2
division
one-shot output
Normal/
Save
settings
Default Display
key
key
key
key
No. 6
No. 1 COM
No. 2 NC
No. 3 YB(+)
No. 4 YA(-)
No. 5 NC
No. 6 COM
QUICK REFERENCE [Applicable model: SGF, SGFW, SGFL] No. SGF12JE1 2018.10
Frequency range group
Ultra-low freque
ncy
Low frequency
Frequency
Decimal point place
No decimal point
1 digit after point
2 digits after point
3 digits after point
Indication unit
No unit
%
mA
V
°C
Save settings
Save
Not save
Output 1,2 Normal/Reverse
Normal
Reverse
Auto/Manual
Auto
Manual
Model Name
Circuit Configuration
SGF, SGFL
Setting Mode
• Output 2 setting mode is available only for the SGFW.
• Communication setting mode is available only for the SGFL.
• If the SET key is pressed for approx. 5 seconds in each setting mode,
the unit will move to the Default Display.
SGFW
Characters
Indication
Number, °C/°F -1 0 1 2 3 4 5 6 7 8 9 °C °F
Indication
lphabet A B C D E F G H I J K L M
Indication
lphabet N O P Q R S T U V W X Y Z
Terminal Arrangement
SGF, SGFL SGFW SGFL only
RS-485 serial communication
Modular jack pin arrangement
Communication speed
9600 bps
19200 bps
38400 bps
Data bit/Parity
8 bits/No parity
8 bits/Even
8 bits/Odd
Stop bit
1 bit
2 bits
Key Operation Flowchart
Display Mode
• For the details of the display mode, refer to the full Instruction Manual.
Default Display
• If the SHIFT and DISP keys (in that order) are pressed together for approx. 3
seconds in any display mode, the display mode will become the Default Display.
• Once the Default Display is set, the DISP key will be in lock status.
• If the DISP key is pressed for approx. 3 seconds, the key lock status will be
cancelled.
• If the DISP key is pressed while the DISP key is in lock status, Multi-Display A
will indicate
和文は裏面をご覧下さい。
Output
cation
Modular
jack
CPU
Input
Power
Setting key
voltage
+
Output 1
circuit
Input
circuit
Power
Setting key
voltage
Output 2
circuit
CPU
1
2
4
6
3
7
8
10
11
1
4
5
9
13
14
12