Insignia NS-SB212 User manual
- Category
- Soundbar speakers
- Type
- User manual
Insignia NS-SB212 soundbar home theater speaker system delivers an immersive audio experience with crystal-clear sound and powerful bass, perfect for movies, music, and gaming. Connect your TV, projector, or DVD/Blu-ray player via RCA, AUX, or optical inputs to enjoy your favorite content.
Insignia NS-SB212 soundbar home theater speaker system delivers an immersive audio experience with crystal-clear sound and powerful bass, perfect for movies, music, and gaming. Connect your TV, projector, or DVD/Blu-ray player via RCA, AUX, or optical inputs to enjoy your favorite content.
Congratulations on your purchase of an
Insignia Soundbar Home Theater Speaker
System. Your NS-SB212 represents the
state of the art in home theater soundbars
and is designed for reliable and trouble-
free performance. See your User Guide for
more information on your Soundbar
Home Theater Speaker.
Package contents
• Soundbar
• AC adapter
• RCA audio cable
• 3.5 mm audio cable
• Mounting template
• Remote control
• User Guide
• Quick Setup Guide
Setting up your soundbar
Mounting the soundbar
You can also set the soundbar on a at surface.
Quick Setup Guide
Soundbar Home Theater Speaker NS-SB212
Features
Top view Back view
Wall
16 in. (406 mm)
Approximately
¼ in. (6-8 mm)
VOL
sweNretaehTdradnatSybdnatS
DSP
BASS
Standby indicator
(Power)
button
Power
indicator
(Input)
button
DSP
button
Sound eld
indicator
BASS button
BASS
indicator
VOL +/– buttons
SUBWOOFER OUT
OPTICAL IN
DC IN
AUX IN
R
L
RCA IN
15.5V
Hanging brackets
SUBWOOFER
OUT jack
DC IN jack
RCA IN
(R and L) jacks
AUX IN jack
OPTICAL IN
jack
(Power) button
(Input) button
DSP buttons
BASS button
VOL +/– buttons
(Mute) button
Using the remote control
1 Remove the plastic tab from the battery compartment before using the
remote control for the rst time.
2 Point the remote control directly at the IR sensor on the front of the
soundbar. You must be within approximately 23 ft. (7 m) of the soundbar.
IR sensor
Remote control
To mount your soundbar on a wall:
1 Select a location close to your TV and directly in front of the
viewing/listening position. For best sound quality, choose a location
where sound waves are not blocked by furniture or other obstacles.
2 Tape the supplied wall mount template card to the wall temporarily.
The template shows you where to locate the two screw holes.
3 Drill two holes on the wall where the template indicates. The screws
should protrude from the wall approximately 1/4 in. (6-8 mm).
4 Secure two screws (not included) to the wall in the holes you just
drilled. The screws must protrude from the wall by about 1/4”. The
screw width must about 3/16” and the screw head about 1/4" to 3/8".
Warning: Improper installation can result in serious injury or damage to
your soundbar. If necessary, seek the assistance of a professional.
Cautions:
• You must use suitable wall anchors if you are mounting on drywall,
concrete, or other wall types.
• If the soundbar is not mounted securely, there is a possibility that it
could fall.
5 Align the speaker hanging brackets with the screws, then hang the
soundbar on the screws.
Note: You must use suitable wall
anchors if you are mounting on
drywall, concrete, or other wall types.
C
M
Y
CM
MY
CY
CMY
K
NS-SB212_12-0161_QSG_V1_EN_final.ai 1 3/15/2012 9:41:31 AMNS-SB212_12-0161_QSG_V1_EN_final.ai 1 3/15/2012 9:41:31 AM
ENGLISH 12-0161
Connections
Choose the connection options below that t your needs.
Caution: Turn o or unplug all components while you are making
connections.
RCA Audio connections
For an RCA audio connection, make the following connections with the
included RCA cable.
AUX IN connections
For connecting auxiliary devices, make the following connections with the
included 3.5mm audio cable.
Digital connections
For a digital connection, make the following connections (cable not
included).
Note: If you use the OPTICAL IN connection, change the device’s audio
output to ‘PCM’ format. Refer to the documentation you received with the
output device for additional information.
Subwoofer connection
If connecting a subwoofer, make the following connections (cable not
included).
Note: A subwoofer is optional.
Notes:
• Make sure that the soundbar and all components are connected
correctly and securely.
Connecting the AC adapter
Cautions:
• Make sure that the electrical outlet matches the AC adapter’s input
requirements of 100-240 V, 50/60 Hz before connecting.
• Use only the AC adapter provided.
• Plug in the AC adapter only after all other connections have been made.
To connect the AC adapter:
1 Connect the AC adapter to the DC IN jack on the back of the soundbar.
2 Plug the other end of the AC adapter into a power outlet.
Using your soundbar
Listening to your soundbar:
1 Press the (Power) button to turn on your soundbar or remote control.
The power indicator turns green.
2 Press the button on the soundbar or the remote control repeatedly to
select the sound source you want.
3 Turn on the sound source component connected to your soundbar and
begin playback. The sound plays through your soundbar.
4 Adjust the volume on your soundbar or the audio component to a
comfortable level.
Warning: Continuous use of high volume sound may permanently
damage your hearing.
5 Press the (Power) button again to turn o your soundbar. The standby
indicator turns on.
Troubleshooting
For troubleshooting information, see your User Guide.
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this product
is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply within the limits for a
class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
FCC warning
Changes or modications not expressly approved by the party responsible
for compliance with the FCC Rules could void the user’s authority to operate
this equipment.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
One-year limited warranty
Visit www.insigniaproducts.com for details.
Contact Insignia:
For customer service, call 1-877-467-4289
www.insigniaproducts.com
© 2012 BBY Solutions, Inc., Inc. All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc.
Registered in some countries. All other products and brand names are trademarks of their
respective owners.
DC IN
AUX IN
R
L
RCA IN
15.5V
TV, projector, or
DVD/Blu-ray player
RCA cable
(provided)
Back panel of
the soundbar
SUBWOOFER OUT
OPTICAL IN
DC IN
AUX IN
R
L
RCA IN
OUTPUT
AUDI O
LR
15.5V
Audio cable
(3.5 mm connectors)
(provided)
TV, CD, MD, MP3 player,
smartphone, etc.
SUBWOOFER OUT
OPTICAL IN
DC IN
AUX IN
R
L
RCA IN
OUTPUT
AUDI O
15.5V
Back panel of
the soundbar
Digital optical cable
(not provided)
SUBWOOFER OUT
OPTICAL IN
DC IN
AUX IN
R
L
RCA IN
OUTPUT
DIGITAL
OPTICAL
15.5V
TV, projector, or
DVD/Blu-ray player
Back panel of
the soundbar
Subwoofer
speaker cable
(not provided)
SUBWOOFER OUT
OPTICAL IN
DC IN
AUX IN
R
L
RCA IN
15.5V
Back panel of
the soundbar
C
M
Y
CM
MY
CY
CMY
K
NS-SB212_12-0161_QSG_V1_EN_final.ai 2 3/15/2012 9:41:32 AMNS-SB212_12-0161_QSG_V1_EN_final.ai 2 3/15/2012 9:41:32 AM
-
1
-
2
Insignia NS-SB212 User manual
- Category
- Soundbar speakers
- Type
- User manual
Insignia NS-SB212 soundbar home theater speaker system delivers an immersive audio experience with crystal-clear sound and powerful bass, perfect for movies, music, and gaming. Connect your TV, projector, or DVD/Blu-ray player via RCA, AUX, or optical inputs to enjoy your favorite content.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Insignia NS-SB212 User manual
-
Insignia NS-SB314 Soundbar Home Theater Speaker System User manual
-
Insignia NS-SB316 Quick setup guide
-
-
-
-
-
-
Insignia NS-HSB318 User manual
-
Other documents
-
Beautiful Enterprise UZZNSSB314 User manual
-
Dynex DX-SB114 User manual
-
MartinLogan Motion Vision User manual
-
MartinLogan Verse User manual
-
Boston Acoustics TVee 25 Owner's manual
-
MartinLogan Cadence User manual
-
MartinLogan Cadence User manual
-
Paradigm Soundplay User manual
-
Paradigm PW Soundbar User manual
-
MartinLogan Motion Vision X User manual
