Eaton E-Config is a powerful software tool that enables users to easily configure and manage Eaton's electrical products. With its intuitive interface and comprehensive features, E-Config helps users to quickly and efficiently set up and maintain their electrical systems. Some of the key capabilities of E-Config include:
- Configuration: E-Config allows users to easily configure Eaton's electrical products, such as circuit breakers, motor starters, and power meters, to meet their specific application requirements.
- Documentation: E-Config automatically generates detailed documentation for each configuration, including wiring diagrams, bills of materials, and technical specifications.
Eaton E-Config is a powerful software tool that enables users to easily configure and manage Eaton's electrical products. With its intuitive interface and comprehensive features, E-Config helps users to quickly and efficiently set up and maintain their electrical systems. Some of the key capabilities of E-Config include:
- Configuration: E-Config allows users to easily configure Eaton's electrical products, such as circuit breakers, motor starters, and power meters, to meet their specific application requirements.
- Documentation: E-Config automatically generates detailed documentation for each configuration, including wiring diagrams, bills of materials, and technical specifications.
©2017 Eaton Corporation. All rights reserved.
This is a photographic template –your
photograph should fit precisely within this rectangle.
E-Config 3.8, 3.9, 3.10
Installation Instructions
How to solve problems with installation
2
©2017 Eaton Corporation. All rights reserved.2
E-Config 3.8, 3.9, 3.10
Installation Instructions
Supported operating systems:
Operating system Support
Windows 2000 It is not supported, E-Config cannot be run
Windows XP It is not supported, E-Config cannot be run
Windows Vista It is not supported, E-Config cannot be run
Windows 7 It is not supported, E-Config can be run
Installation .NET framework 4.5.2 probably needed
(if required)
Windows 8, 8.2 Is supported, E-Config can be run
Installation .NET framework 4.5.2 probably needed
(if required)
Windows 10 Is supported, E-Config can be run
Installation .NET framework is not needed
(standard part of Windows 10 operating system)
3
©2017 Eaton Corporation. All rights reserved.3
E-Config 3.8, 3.9, 3.10
Installation Instructions
.NET Framework 4.5.2 –install only if it is required:
•Web Microsoft: https://www.microsoft.com/en-us/download/details.aspx?id=42643
•Web E-Config: www.eaton.cz/econfig, section FAQ
This is the so-called Web Installer -after launch, the necessary files
are automatically downloaded according to the situation on the
target computer and the installation is performed.
4
©2017 Eaton Corporation. All rights reserved.4
E-Config 3.8, 3.9, 3.10
Installation Instructions
Access Database Engine 2016:
Office Support
Office XP, Office 2001, 2003, 2007 It is not supported
Access Database Engine 2016 must be installed
Office 2010, 2013 It is supported
Access Database Engine 2016 must be installed
(only if it will be required)
Office 2016, 2019 It is supported
There is no need to install anything
Office 365, Microsoft 365 It is supported
Microsoft 365 (Office 365) Access Runtime must be
installed (only if it will be required)
Alternative tools
Open Office, ...
It is supported
Access Database Engine 2016 must be installed
(only if it will be required)
5
©2017 Eaton Corporation. All rights reserved.5
E-Config 3.8, 3.9, 3.10
Installation Instructions
Access Database Engine 2016 –install only if it is required:
•Web Microsoft: https://www.microsoft.com/en-us/download/details.aspx?id=54920
•Web E-Config: www.eaton.cz/econfig, section FAQ
You must install the same bit version of the Access Database Engine as Office
currently installed has:
•32-bit Office ►32-bit Access Database Engine 2016.
•64-bit Office ►64-bit Access Database Engine 2016.
•It is not known (not enough information) ►32-bit Office is mostly installed
►32-bit Access Database Engine 2016 is recommended.
32-bit
64-bit
64-bit
32-bit
Microsoft Office 2007 and older, 2010, 2013, no Microsoft Office (alternative tools like Open Office, ...)
Microsoft 365 (Office 365) –see next slide
6
©2017 Eaton Corporation. All rights reserved.6
E-Config 3.8, 3.9, 3.10
Installation Instructions
Microsoft 365 (Office 365) Access Runtime –install only if it is required:
•Web Microsoft: https://support.microsoft.com/en-us/office/download-and-install-
office-365-access-runtime-185c5a32-8ba9-491e-ac76-91cbe3ea09c9
•Web E-Config: www.eaton.cz/econfig, section FAQ
You must install the same bit version of the Access Runtime as Office currently
installed has:
•32-bit Office ►32-bit Access Runtime.
•64-bit Office ►64-bit Access Runtime.
Microsoft 365 (Office 365)
This is the so-called Web Installer -after launch, the necessary files
are automatically downloaded according to the situation on the
target computer and the installation is performed.
Solution for Eaton employees computers.
9
©2017 Eaton Corporation. All rights reserved.9
E-Config 3.8, 3.9, 3.10
Installation Instructions
Error messages after E-Config first launch:
•It has been installed to Program Files directory and missing sufficient access rights
►Uninstall E-Config and install it again to the default directory (directly on C drive).
10
©2017 Eaton Corporation. All rights reserved.10
E-Config 3.8, 3.9, 3.10
Installation Instructions
Error messages after E-Config first launch:
•Access Database Engine has been installed, but bit version was detected incorrectly
•Click on YES button
•Follow instructions on the screen. Alternatively, repeat and try all possible variants:
Windows 32-bit + Engine 32-bit // Windows 64-bit + Engine 32-bit // Windows 64-bit + Engine 64-bit
11
©2017 Eaton Corporation. All rights reserved.11
E-Config 3.8, 3.9, 3.10
Installation Instructions
Error messages after E-Config first launch:
•System library Visual C++ Redistributable is missing
•Windows 10, Home probably Visual C++ 2010 Redistributable is missing
•Windows 7 probably Visual C++ 2017 Redistributable is missing
•Download Visual C++ Redistributable and install it (32-bit as well as 64-bit version)
•from Microsoft web (https://support.microsoft.com/cs-cz/help/2977003/the-latest-supported-visual-c-downloads), or
•from E-Config web (http://e-config.moeller.cz/index.php?id=3&lang=1)
12
©2017 Eaton Corporation. All rights reserved.12
E-Config 3.8, 3.9, 3.10
Installation Instructions
Eaton Elektrotechnika s.r.o.
Komárovská 2406, 193 00 Praha 9, Czech Republic
Technical support: +420 267 990 440
www.EatonElektrotechnika.cz
Technical support
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
Eaton E-Config is a powerful software tool that enables users to easily configure and manage Eaton's electrical products. With its intuitive interface and comprehensive features, E-Config helps users to quickly and efficiently set up and maintain their electrical systems. Some of the key capabilities of E-Config include:
- Configuration: E-Config allows users to easily configure Eaton's electrical products, such as circuit breakers, motor starters, and power meters, to meet their specific application requirements.
- Documentation: E-Config automatically generates detailed documentation for each configuration, including wiring diagrams, bills of materials, and technical specifications.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Novell Data Access Governance (File Reporter) Installation guide
-
-
-
-
Dell Endpoint Security Suite Pro Administrator Guide
-
Dell Wyse 5470 Owner's manual
-
IBM SPSS Data Collection Server 6.0.1 Installation guide
-
Kofax TotalAgility 7.9.0 Installation guide
-
F-SECURE ANTI-VIRUS LINUX CLIENT SECURITY - Administrator's Manual
-