2. Rohl
  3. Kitchen and

Rohl Kitchen and User manual

  • Hello! I've reviewed the provided user manual for the faucet. This document includes information about the faucet's operating conditions, installation, maintenance, and finish care. I can answer questions about recommended pressures, how to service the aerator and cartridge, or how to keep your faucet looking its best.
  • What is the maximum hot water temperature?
    What is the recommended hot water temperature?
    Where is the hot water connection located?
3
OPERATING CONDITIONS
- Minimum dynamic pressure............................... 7.0 PSI
- Recommended operational pressure (static)........... 14.0 - 70.0 PSI
(ATTENTION: when pressure exceeds 70.0 PSI, we recommend the installation of a pressure reducer)
- Maximum operational pressure (static).................. 150 PSI
- Maximum test pressure (static)............................200 PSI
- Maximum hot water temperature.........................170°F
- Recommended hot water temperature..................140°F (for safety and energy saving)
- Hot water connection...................................... left
- Cold water connection...................................... right
DATOS TÉCNICOS
- Presión dinámica mínima.................................. 7.0 PSI
- Presión de trabajo recomendada (estática)........... 14.0 - 70.0 PSI
(Nota: para presiones superiores a los 70.0 PSI les recomendamos instalar un reductor de presión)
- Presión máxima de trabajo (estática).................... 150 PSI
- Presión máxima de prueba (estática).................... 200 PSI
- Temperatura máxima agua caliente.....................170°F
- Temperatura aconsejada agua caliente ................140°F (para seguridad y ahorrar energía)
- Conexión agua caliente................................... izquierda
- Conexión agua fría ........................................ derecha
COLD
HOT
4
Not Included Tools
Included Parts
30
30
A3A2A1 A4
D1
B1
C1
B2
F1
E1
G1 H1
5/16”
INSTALLATION
5
6
2
1
IMPORTANT!
Flush hot and cold water lines before faucet installation.
2’
6
INSTALLATION
D1
D1
Install the base “D1”.
7INSTALLATION
Guide handspray hose “B2” through top side of faucet body.
B2
B2
8
INSTALLATION
B1
B1
B1
Thread in hot and cold water supply lines “B1” by rotating
lines by hand only.
COLD
HOT
9INSTALLATION
A1
Ø1 3/8” Min
Ø1 1/2” Max
2” Max
A1
Install faucet into deck, tting “A1” washer.
10
INSTALLATION
A3 A4A2C1
C1
A2
A3
A4
Secure faucet to deck as shown.
2” Max
B2
11 INSTALLATION
Install weight “F1” on hose and secure hose attachment
to mixed water outlet tube,
with connector “G1” and
seal washer “H1”.
F1
F1H1
H1
G1
H1
G1
12
INSTALLATION
Install the shower as shown.
E1
E1
E1
5/16”
13 INSTALLATION
!
1
2
HOT
Connect hot and cold supply
lines to hot and cold inlets.
Pay attention not to damage
supply lines.
COLD
!
!
3
1
2
14
MAINTENANCE
Servicing the aerator.
OFF
OFF
ON
1”
3/32”
1
MAINTENANCE
15
Not Included Tools
Replacing faucet cartridge.
2
3
4
5
67
10 11
14
13
12
16
6 lb ft
MAINTENANCE
Replacing faucet cartridge.
Replacing faucet cartridge.
89
1. WIPE DOWN AFTER USE TO AVOID SPOTTING
2. USE A SOFT CLOTH FOR DETAIL CLEANING
3. DO NOT USE SPRAY CLEANERS WITH AMMONIA, ALCOHOL OR BLEACH
4. DO NOT USE ABRASIVES LIKE COMET, AJAX OR BONAMI
ERACGNINAELCHSINIF
CHROME 50/50 VINEGAR AND WATER FLITZ WAX OR GAGNON
FOR WATER SPOTTING ON POLISHED CHROME, USE SIMICHROME PASTE.
18
FINISH CARE
FINISH CARE
1. WIPE DOWN AFTER USE TO AVOID SPOTTING
2. USE A SOFT CLOTH FOR DETAIL CLEANING
3. DO NOT USE SPRAY CLEANERS WITH AMMONIA, ALCOHOL OR BLEACH
4. DO NOT USE ABRASIVES LIKE COMET, AJAX OR BONAMI
Rubinetteria CISAL S.p.A.
28010 Pella frazione Alzo (Novara) – ITALY – Via P. Durio, 160
Telefono 0322/918111 – Telefax 0322/969518
E-mail: [email protected] - www.cisal.it
ROHL LLC
3 PARKER
IRVINE, CA 92618-1605 USA
TEL: 800-777-9762 - FAX: 714-557-8635
ERACGNINAELCHSINIF
CHROME 50/50 VINEGAR AND WATER FLITZ WAX OR GAGNON
INCA BRASS 50/50 VINEGAR AND WATER DO NOT USE FLITZ –
GAGNON’S SX OK – WRIGHTS
SILVER CREAM
POLISHED NICKEL 50/50 VINEGAR AND WATER FLITZ WAX OR GAGNON
SATIN NICKEL 50/50 VINEGAR AND WATER FLITZ WAX OR GAGNON
TUSCAN BRASS PAT DRY AFTER USE FLITZ WAX OR GAGNON
FOR WATER SPOTTING ON CHROME, POLISHED NICKEL OR SATIN NICKEL, USE
WRIGHTS SILVER POLISH CREAM OR SIMICHROME PASTE.
POLISHED CHROME ’S SX
’S SX
Maintaining Your Faucet Finish
No matter which nish you select, here are a few simple steps to keep your ROHL
kitchen and bath xtures looking beautiful for years:
•Daily, pat the xture dry with a soft cloth after each use - this is the single
most important care you can give any nish!
•Occasionally, use a mild clear liquid soap with a neutral PH balance and water
to gently clean your faucet. Do not use Dove or anti-bacterial soap.
these products will leave a residue that could harm your nish.
•When necessary, a 50/50 solution of vinegar and water can be applied
to remove hard water deposits. Do not soak the product in the solution.
Vinegar is a mild acid which will harm the nish with prolonged contact.
•Avoid all cleaning products that contain ammonia, bleach, and alcohol.
They may damage the nish. Use clear liquid soap with a neutral PH balance.
• Care and use products mentioned in this brochure may be ordered through your
local ROHL retailer.
Advice relevant code.
/