Kuzco Lighting Alden EB49020-UNV User manual

Alden EB49020-UNV
Brand
Kuzco Lighting
Model
Alden EB49020-UNV
Type
User manual

Kuzco Lighting Alden EB49020-UNV is an exterior bollard LED light fixture designed for outdoor use. It features pre-wired LED modules for energy efficiency and long-lasting performance. It requires a 120-277V input and is compatible with ELV (Electronic Low Voltage) or TRIAC dimmers for adjustable lighting. The fixture has an adjustable mounting base and can be rotated to the desired orientation. Installation requires securing the anchor bolts to the mounting guide plate before pouring concrete, attaching the mounting base after the concrete has set, and completing the electrical connections.

Kuzco Lighting Alden EB49020-UNV is an exterior bollard LED light fixture designed for outdoor use. It features pre-wired LED modules for energy efficiency and long-lasting performance. It requires a 120-277V input and is compatible with ELV (Electronic Low Voltage) or TRIAC dimmers for adjustable lighting. The fixture has an adjustable mounting base and can be rotated to the desired orientation. Installation requires securing the anchor bolts to the mounting guide plate before pouring concrete, attaching the mounting base after the concrete has set, and completing the electrical connections.

INSTALLATION SHEET
Exterior Bollard LED
START FROM HERE
• Make sure POWER is COMPLETELY OFF at the fuse box
• Have your fixture installed by a qualified licensed electrician
• Prepare everything in a clear area
• Wear gloves at all time during this installation
• Read instructions carefully before you start assembly
• Keep this installation sheet for future reference
Technical Support: 1-855-855-8926
Illustration 2
3a.
2b.
1d.
1b.
3b.
Page 1 of 2
19054 28th Avenue Surrey, BC Canada V3Z 6M3
T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196
W: kuzcolighting.com
EB49020-UNV
20230109
Please Note:
• This Kuzco LED fixture comes with pre-wired LED module(s)
• Unless instructed, Do Not touch any part of the LED module(s) as any unnecessary
contact with the module could cause permanent damage
• For dimming, an ELV (Electronic Low Voltage) or TRIAC type of dimmer is required
• 120~277V input
2a.
1a.
Illustration 1Illustration 1
1c. (M10 x 1.5mm
concrete anchor bolt)
1d.
1e
1.
2.
3.
4.
5.
6.
Remove fixture from its original package
Provide means to bring supply wiring to bollard in
accordance with local code before pouring concrete
Secure anchor bolts (1c) to mounting guide plate (1e) with
hex nuts and washers provided (1d) before concrete
cures (See Illustration 1)
After concrete is set, replace mounting guide plate (1e)
with mounting base (2b), adjust mounting base to desired
orientation and secure with hex nuts and washers (1d)
Pull conduit through base plate to make proper electrical
connection (black to hot “L”, white to neutral “N”, ground
to “GND”) with wire nuts (1b) provided in hardware
package, tie access wires to avoid contact with ground
Align interior bump on fixture base (3a) with slot on
mounting base (2b) (See Illustration 2), rotate to desired
orientation, and secure fixture base (3a) to mounting base
(2b) with screws (3b). Secure fixture head (1a) to fixture
base (3a) with screws (2a)
INSTALLATION SHEET
EB49020-UNV
Exterior Bollard LED
START FROM HERE
• Make sure POWER is COMPLETELY OFF at the fuse box
• Have your fixture installed by a qualified licensed electrician
• Prepare everything in a clear area
• Wear gloves at all time during this installation
• Read instructions carefully before you start assembly
• Keep this installation sheet for future reference
Technical Support: 1-855-855-8926
Page 2 of 2Page 2 of 2
19054 28th Avenue Surrey, BC Canada V3Z 6M3
T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196
W: kuzcolighting.com
Mounting Guide Template
20230109
Please Note:
• This Kuzco LED fixture comes with pre-wired LED module(s)
• Unless instructed, Do Not touch any part of the LED module(s) as any unnecessary
contact with the module could cause permanent damage
• For dimming, an ELV (Electronic Low Voltage) or TRIAC type of dimmer is required
• 120~277V input
Ø150mm
116mm
Ø12mm x 4
Ø50mm
  • Page 1 1
  • Page 2 2

Kuzco Lighting Alden EB49020-UNV User manual

Alden EB49020-UNV
Brand
Kuzco Lighting
Model
Alden EB49020-UNV
Type
User manual

Kuzco Lighting Alden EB49020-UNV is an exterior bollard LED light fixture designed for outdoor use. It features pre-wired LED modules for energy efficiency and long-lasting performance. It requires a 120-277V input and is compatible with ELV (Electronic Low Voltage) or TRIAC dimmers for adjustable lighting. The fixture has an adjustable mounting base and can be rotated to the desired orientation. Installation requires securing the anchor bolts to the mounting guide plate before pouring concrete, attaching the mounting base after the concrete has set, and completing the electrical connections.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents