KUZCO LP45548-UNV Installation guide

Brand: KUZCO

Model: LP45548-UNV

Type: Installation guide

KUZCO LP45548-UNV is a versatile LED linear pendant light fixture designed to elevate the ambiance of any space.

Key Features:

Adjustable Wire Length: Fine-tune the wire length to achieve the desired drop height and customize your lighting.
Dimmable Functionality: Control the light intensity using ELV (Electronic Low Voltage) or TRIAC dimmers, allowing you to create a cozy or vibrant atmosphere.
Wide Voltage Range: Supports a wide voltage range of 120-277V, making it compatible with most electrical systems.

Use Cases:

Accent Lighting: Highlight artwork, furniture, or architectural features with focused illumination.

KUZCO LP45548-UNV is a versatile LED linear pendant light fixture designed to elevate the ambiance of any space.

Key Features:

Adjustable Wire Length: Fine-tune the wire length to achieve the desired drop height and customize your lighting.
Dimmable Functionality: Control the light intensity using ELV (Electronic Low Voltage) or TRIAC dimmers, allowing you to create a cozy or vibrant atmosphere.
Wide Voltage Range: Supports a wide voltage range of 120-277V, making it compatible with most electrical systems.

Use Cases:

Accent Lighting: Highlight artwork, furniture, or architectural features with focused illumination.

1a.

1b.

1c.

1f.

1g. 1e.

4a.

2a.

2b.

2g.

46-7/8”

3-15/16”

Illustration 1

Note: Ideal distance of wire grippers from canopy is L46-7/8”

and W3-15/16”

INSTALLATION SHEET

LP45548-UNV

LED Linear Pendant

START FROM HERE

Remove the fixture from its original packaging

Separate the mounting plate (1c) from the canopy (2a)

by removing the canopy screws (2b)

Attach the mounting plate (1c) to the electrical junction

box (1a) using junction box screws (1e) provided in the

hardware package

Secure mounting plate (1c) to mounting surface

with anchors (1f) and screws (1g)

Make proper electrical connections (black to hot “L”,

white to neutral “N”, ground to “GND”) with wire

nuts (1b) provided in hardware package and place

driver (4a) in canopy (2a)

Attach canopy (2a) to mounting plate (1c) with

canopy screws (2b)

Mark and install ceiling anchors (3b) with screw (3a)

and anchor (3c), opening on ceiling anchor (3b) facing

towards canopy (2a). Ideal distance between ceiling

anchors (3b) is L46-7/8” and W3-15/16” (See Illustration 1)

Place wire onto pulley (3g), insert into ceiling anchor

(3b) and secure with screw (3f)

Fine tone wire length if necessary, by push and hold wire

gripper (2g) and then adjust wire to desired length

• Make sure POWER is COMPLETELY OFF at the fuse box

• Have your fixture installed by a qualified licensed electrician

• Prepare everything in a clear area

• Wear gloves at all time during this installation

• Read instructions carefully before you start assembly

• Keep this installation sheet for future reference

Technical Support: 1-855-855-8926

Please Note:

• This Kuzco LED fixture comes with pre-wired LED module(s)

• Unless instructed, Do Not touch any part of the LED module(s) as any unnecessary

contact with the module could cause permanent damage

• Use ELV (Electronic Low Voltage) or TRIAC type of dimmer for dimming application

• 120-277V input

3b.

3c.

3f.

3a.3g.

Wire

19054 28th Avenue Surrey, BC Canada V3Z 6M3

T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196

W: kuzcolighting.com

20230314

KUZCO LP45548-UNV Installation guide

Brand: KUZCO

Model: LP45548-UNV

Type: Installation guide

KUZCO LP45548-UNV is a versatile LED linear pendant light fixture designed to elevate the ambiance of any space.

Key Features:

Adjustable Wire Length: Fine-tune the wire length to achieve the desired drop height and customize your lighting.
Dimmable Functionality: Control the light intensity using ELV (Electronic Low Voltage) or TRIAC dimmers, allowing you to create a cozy or vibrant atmosphere.
Wide Voltage Range: Supports a wide voltage range of 120-277V, making it compatible with most electrical systems.

Use Cases: