Warning
CHOKING HAZARD, small parts. Not suitable for children under 3 years.
Adult assembly required.
Parts List
Inflatable mat x1pc
Hand-operated air pump x1pc
Plastic wrench x1pc
Repair patch x1pc
Use Instruction
1). Spread out the mat on the 2). Open inflatable valve lid by 3). Press down the pressure valve, and
ground free of sharp point. counter clockwise direction. ensure it is in open status.
4). Inflate the mat with air pump. 5). Press down the valve again after fully 6). Tighten up the valve with plastic
Inflated, and ensure it is in close status. wrench, then screw the lid into the valve.
Repair Instruction
If a chamber is damaged, use the provided repair patch.
1. Completely deflate the product.
2. Clean and dry the damaged area.
3. Cut a piece from the repair patch, ensure it is larger than the area to be repaired and no rounded corners to prevent peeling.
4. Apply the vinyl repair glue sparingly to patch, spreading out it evenly all over, then cover to the damaged area and smooth out
any air bubbles.
5. Place a weight on the repaired area, and allow 24hours to reach full bond strength.
Clean and Storage
1. After deflation, use a damp cloth to gently clean all surfaces. Don’t use solvents or other chemicals that may damage the
product.
2. Store in a cool, dry place and out of children’s reach.
3. Check the product for damage at the beginning of each season and at regular intervals when in use.
FOR AU/NZ: IMPORTED FOR KMART STORES IN AUSTRALIA AND NEW ZEALAND.
Made in China
INFLATABLE AIR TRACK MAT
Key Code: 43140275