iPE Lambo LP700 User manual

Brand: iPE

Model: Lambo LP700

Type: User manual

iPE Lambo LP700 is an exhaust system designed to improve the performance of your Lamborghini LP700. It features adjustable valves that allow you to control the exhaust sound and performance, with the ability to open the valves automatically at a specific gas pedal position. The system is made from high-quality materials and is easy to install, with all the necessary tools and instructions included. With the iPE Lambo LP700 exhaust system, you can expect enhanced sound, improved performance, and a more enjoyable driving experience.

iPE Lambo LP700 is an exhaust system designed to improve the performance of your Lamborghini LP700. It features adjustable valves that allow you to control the exhaust sound and performance, with the ability to open the valves automatically at a specific gas pedal position. The system is made from high-quality materials and is easy to install, with all the necessary tools and instructions included. With the iPE Lambo LP700 exhaust system, you can expect enhanced sound, improved performance, and a more enjoyable driving experience.

WWW.IPE-f1.com

1

Installation instructions

iPE Exhaust system for

Lambo LP700

Preface

This document explains installation procedures that relates setting and

operation methods for the exhaust sold by IPE.

Important Notice

IPE developed this exhaust according to the improvement of stock .

Therefore, there will be no effect of the car from the original

manufacturer after installation. There is an inductive power supply

function between the car key and the car for many vehicle models.

Therefore, the car key should be kept away from the car with a distance

of at least five meters to maintain safe conditions.

The exhaust of a car right after driven is still in a high temperature. Thus,

please wear heat insulating gloves to replace the exhaust, or perform the

replacement after the temperature lowered to avoid burns.

For avoiding the generation of resonance, please don’t let the valve open

too early when setting the valve to open automatically. The opening of

the valve is recommended to be set to 60% of gas pedaling. Please refer

to page 21 for the explanation of detail setting.

IPE exhaust is designed according to the stock engine data. In case the

engine computer upgraded for increasing horse power, obvious

resonance in conjunction with this exhaust could occur. IPE also provide

revised exhausts for such vehicles, please contact us for further details.

WWW.IPE-f1.com

2

Tools required for

Operating Procedures

Star groove wrench, star

driver (E12, E14)

Outer hexagonal wrench

(13mm, 14mm, 16mm)

Torque wrench

Rust Preventive spray

WWW.IPE-f1.com

3

4

WWW.IPE-f1.com

iPE LP 700 Assembly of product appearance

(The product excluding headers)

Cat pipe

Muffler

Tips

Procedures and related points for

Demounting Stock Exhaust WWW.IPE-f1.com

5

1.Demounting engine room protection shield

2.Demounting hexagonal screw of engine protection shield

3.Demounting fixed piece of spoiler

4.Demounting fixed screws of both sides(interior)

5.Demounting fixed screws under spoiler

6.Loosening screws of spoiler hanger(2pcs both sides)

7.Unplugging the plugs under spolier(2 places)

WWW.IPE-f1.com

6

WWW.IPE-f1.com

7

8.Lifting up spoiler after loosened, and loosening the 4 screws onrear bumper

9.Demounting air intake net of both sides(reverse hook)

10.Demounting air intake base of both sides

8

WWW.IPE-f1.com

12.Loosening rear bumper screw after demounting both rear wheels and fenders

13.Demounting bottom fender and rear bumper screws

14.Demounting spoiler and bumper(2 men assist)

11.Loosening front bumper screws inside of both air intake

16.Demounting fixed screw of stock muffler

WWW.IPE-f1.com

9

15.Demounting rear bumping bar

17.Demounting bottom muffler hanging lug and clamp

WWW.IPE-f1.com

10

Demounting stock muffler when finished

WWW.IPE-f1.com

11

WWW.IPE-f1.com

18.Demounting cat pipe of both sides

-Demounting air intake pipe of left side

- Demounting lubricating oil pipe(leaking out about 1L)

- Demounting oxygen sensor and exhaust temperature sensor

of both sides, and clamps (2pcs of oxygen sensor and exhaust

temperature sensor both sides)

~Stock exhaust system domounting finished~

WWW.IPE-f1.com

12

Procedures and related points of iPE Exhaust

installation

1.Cat. Pipe installation and mounting clamps

Adjusting the length of one side of cat pipe before installed

2. Mounting oxygen sensor and exhaust temperature sensor of both sides

WWW.IPE-f1.com

13

3.Mounting muffler fixed screws

4.Mounting hanging lug base

5.Mounting tips

WWW.IPE-f1.com

14

6.Mounting tips of bumper

7.Mounting bumper and spoiler by reversing the order

WWW.IPE-f1.com

1515

8.Connecting vacuum source to muffler valve

9.After three-way branch connected, connecting with stock vacuum source

~ Above IPE exhaust system installation finished~

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15

iPE Lambo LP700 User manual

Brand: iPE

Model: Lambo LP700

Type: User manual

iPE Lambo LP700 is an exhaust system designed to improve the performance of your Lamborghini LP700. It features adjustable valves that allow you to control the exhaust sound and performance, with the ability to open the valves automatically at a specific gas pedal position. The system is made from high-quality materials and is easy to install, with all the necessary tools and instructions included. With the iPE Lambo LP700 exhaust system, you can expect enhanced sound, improved performance, and a more enjoyable driving experience.

Other documents