SystemAir 24806 Operating instructions

24806
Brand
SystemAir
Model
24806
Type
Operating instructions

SystemAir 24806 is a universal 0-10V controller that simplifies demand control for EC fans. It compares input signals with an adjustable set point and regulates a 0..10 V output signal based on a PI algorithm. The device can be used with all 220V single-phase and 380V three-phase EC fans and accepts 0-10V input from any control sensor or BMS. Installation, connection, and setup are simple, and the controller conforms to CE standards EN 60730-1, EN 61000-6-3, and EN 61000-6-1.

SystemAir 24806 is a universal 0-10V controller that simplifies demand control for EC fans. It compares input signals with an adjustable set point and regulates a 0..10 V output signal based on a PI algorithm. The device can be used with all 220V single-phase and 380V three-phase EC fans and accepts 0-10V input from any control sensor or BMS. Installation, connection, and setup are simple, and the controller conforms to CE standards EN 60730-1, EN 61000-6-3, and EN 61000-6-1.

Our Address
Puravent, Adremit Limited, Unit 5a, Commercial Yard,
Settle, North Yorkshire, BD24 9RH
Get In Touch
Call: 0845 6880112
Email: [email protected]
Document type: Product card
Document date: 2019-08-01
Generated by: Systemair Online Catalogue
EC-BASIC-U UNIVERSAL 0-10V
Item no. 24806
Description
• Simple to install, connect and set up
• 50/60HZ mains option
• Can be used with all 220V single phase and 380V three phase EC fans
• Can accept 0-10V input from any control sensor or BMS
• Conforms to CE standards EN 60730-1, EN 61000-6-3, EN 61000-6-1
• Demand control made simple
The controller compares input signal with an adjustable set point and regulates a
0..10 V output signal applied to a ventilator with a PI algorithm in direct or reverse
action based on jumper JP1 setting:
JP1 closed 1-2 = reverse action
JP1 closed 2-3 = direct action
Technical parameters
Voltage 85-265 V
Power consumption max 0,46 W
Frequency 50/60 Hz
Temperature range -20-50 °C
Working range 0...100%
Dimensions
Name: EC-BASIC-U UNIVERSAL 0-10V | Item no.: 24806
Document type: Product card | Document date: 2019-08-01 | Generated by: Online catalogue
1 / 3
Our Address
Puravent, Adremit Limited, Unit 5a, Commercial Yard,
Settle, North Yorkshire, BD24 9RH
Get In Touch
Call: 0845 6880112
Email: [email protected]
Accessories
Electric accessories
Systemair-1M CO2 duct sensor (14908)
Systemair-1 CO2 duct sensor (14906)
Systemair-2 CO2 duct sensor (14907)
Documentation
IMO_EC-BASIC_EN_SV_rev3.pdf (1,42MB)
24806_Declaration of Conformity_EN.pdf (127,33kB)
Name: EC-BASIC-U UNIVERSAL 0-10V | Item no.: 24806
Document type: Product card | Document date: 2019-08-01 | Generated by: Online catalogue
2 / 3
Our Address
Puravent, Adremit Limited, Unit 5a, Commercial Yard,
Settle, North Yorkshire, BD24 9RH
Get In Touch
Call: 0845 6880112
Email: [email protected]
Wiring
Name: EC-BASIC-U UNIVERSAL 0-10V | Item no.: 24806
Document type: Product card | Document date: 2019-08-01 | Generated by: Online catalogue
3 / 3
  • Page 1 1
  • Page 2 2
  • Page 3 3

SystemAir 24806 Operating instructions

24806
Brand
SystemAir
Model
24806
Type
Operating instructions

SystemAir 24806 is a universal 0-10V controller that simplifies demand control for EC fans. It compares input signals with an adjustable set point and regulates a 0..10 V output signal based on a PI algorithm. The device can be used with all 220V single-phase and 380V three-phase EC fans and accepts 0-10V input from any control sensor or BMS. Installation, connection, and setup are simple, and the controller conforms to CE standards EN 60730-1, EN 61000-6-3, and EN 61000-6-1.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents