2. Manitou
  3. McLeod Shaft O-ring

Manitou McLeod Shaft O-ring Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Manitou McLeod Shaft O-ring Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
SHAFT O-RING INSTALL TOOL
46-32755
HAYES COMPONENTS - 5800 W DONGES BAY ROAD - MEQUON, WI - 53092
FAX: (262) 512-4219
techsupport@hayesbicycle.com
PHONE: (888)686-3472
www.hayescomponents.com
techsupportEU@hayesbicycle.com
www.manitoumtb.com
Place the bullet tool over the threads on the
end of the shaft and slide the O-ring over the
tool into the groove on the shaft.
SHAFT OD SEAL INSTALLATION SHAFT ID SEAL INSTALLATION
Start the O-ring horizontally into the end of
the shaft and use the end of the tool to push
the it into the groove on the shaft ID.
For further instructions on service tool usage watch the McLeod Service videos at:
www.manitoumtb.com/support/
/