Blitz BZKT1.2 Quick & Easy Installation

1.2 FARAD DIGITAL POWER CAPACITOR WITH INSTALL KIT

1. Disconnect vehicle's battery.

2. Select mounting location for capacitor

3. Select a convenient location for installation of the distribution block.

4. Cut power and ground wires to existing amp or route wires to block for

a new install.

5. Connect the wires so they continue through the distribution block

on to the amp.

6. Connect ring terminals on power and ground wires to

capacitor and route wires to distribution block.

7. Cut wires to length and make connection.

8. Reconnect battery and enjoy a better sounding

system!

QUICK & EASY INSTALLATION

WIRING DIAGRAM

BLITZ 1.2 Farad

Power Capacitor

(Supplied)

BLITZ 1.2 Farad

Power Capacitor

(Supplied)

4ft of 4 ga Power &

Ground Wire (Supplied)

4ft of 4 ga Power &

Ground Wire (Supplied)

0/4 ga Main Power & Ground wire

Distribution Block(Supplied)

0/4 ga Main Power & Ground wire

Distribution Block(Supplied)

Power Source(Battery)

Power to Amplifier

Your Amplifier

www.blitzaudio.com

BZKT12