Lanzar LQ24CAP Quick Installation

WIRING DIAGRAM

Lanzar 2.4 Farad

Power Capacitor

(Supplied)

Power Source(Battery)

2.4 FARAD DIGITAL POWER CAPACITOR WITH INSTALL KIT

1. Disconnect vehicle's battery.

2. Select mounting location for capacitor

3. Select a convenient location for installation of the distribution block.

4. Cut power and ground wires to existing amp or route wires to block for a new install.

5. Connect the wires so they continue through the distribution block on to the amp.

6. Connect ring terminals on power and ground wires to capacitor and route wires to

distribution block.

7. Cut wires to length and make connection.

8. Reconnect battery and enjoy a better sounding ystem!

QUICK & EASY INSTALLATION

Power to Amplifier

Your Amplifier

www.lanzar.com

FARADFARAD

PowerPower

2.4

LQ24CAP

High Performance

Car Audio Accessory

High Performance

Car Audio Accessory

4ft of 4 ga Power &

Ground Wire (Supplied)

0/4 ga Main Power & Ground wire

Distribution Block(Supplied)