Bticino 344163 User manual

344163

TiPolyxMemoryDisplay

User guide

09/10-01 PC

2

TiPolyxMemoryDisplay

User guide

3

Contents

1. Hardware and Software requirements 4

1.1 Hardware requirements 4

1.2 Software requirements 4

2. Installation 4

3. Fundamental concepts 4

3.1 Start screen and pushbuttons/menu for the selection of the functions 5

3.2 Connecting the device to a PC 7

3.3 Download 8

3.4 Upload 9

3.5 Update firmware 10

3.6 Request device info 10

4. Main screen 11

4.1 Project items area 12

4.2 Display area 12

4.3 Property/Project Area 13

5. Project configuration 14

5.1 Home Page 14

5.2 Communication - Available functions and their configuration 16

5.3 Home automation - Available functions and their configuration 18

5.4 Advanced - Available functions and their configuration 22

6. System configuration 24

7. Ringtone configuration 25

7.1 Description of the functions 25

7.2 Creating a ringtone 26

7.3 Linking a ringtone to an event 30

8. Project creation procedure 31

4

1.1 Hardware requirements

• Personal Computer with > 300 MHz Pentium processor minimum.

• 1 GB RAM memory.

• SVGA graphic card with 800x600 resolution.

• CD-ROM reader.

• Mouse.

1.2 Software requirements

• Windows XP 32BIT, Windows Vista 32BIT, or Windows 7.

• Microsoft™ framework.NET 3.5 SP1.

The updated requirements can be found on the www.bticino.com website

1. Hardware

and Software

requirements

To install the TiPolyxMemoryDisplay software proceed as follows:

1. Insert the CD-Rom in the CD drive;

2. Select “Install TiPolyxMemoryDisplay” from the main web screen that will appear;

3. The installation program will start copying the system files needed for the installation of the

TiPolyxMemoryDisplay software.

2. Installation

Warning: The

TiPolyxMemoryDisplay

software is the

fundamental tool for the

configuration of the Polyx

Memory Display 344163,

which, for convenience,

will be referred to as

device in this manual. The

content of this software

is protected by exclusive

rights owned by the

company BTicino SpA.

3. Fundamental

concepts

Warning: For correct

TiPolyxMemoryDisplay

software operation,

the device must be

installed following the

instructions contained

in the instruction leaflet

supplied with the product.

The TiPolyxMemoryDisplay software lets you confi gure the device.

Depending on the installer and user’s needs you can start with a new design or edit an existing one.

In this manual all the examples refer to a “new design”.

To create a new design

• Run TiPolyxMemoryDisplay.

• Make a new design.

• Send the data to the device

To edit an existing design

• Receive the current confi guration data from the device.

• Make any modifi cations.

• Send the data of the design made to the device

With TiPolyxMemoryDisplay you can update the device firmware version (Add fi rmware) with new

revisions issued by Bticino.

TiPolyxMemoryDisplay

User guide

5

3.1 Start screen and pushbuttons/menu for the selection of the functions

After initialising the program the start screen will be displayed. From here the user can:

• Create a new project

• Open an existing project

• Acquire the configuration from the device

• Display the information on the device

• Update the firmware

• Select the language

When creating or opening a project, the main screen appears, from where the user can perform all

the functions explained below.

All the functions that can be performed using TiPolyxMemoryDisplay can be selected by clicking the

icons on the toolbar, or by selecting the appropriate items from the drop down menus.

The toolbar includes the following functions:

Creation, Open and Save configuration file

Upload, Download the configuration

Update device firmware

Request of device information

Selection of the application language

Connection to the www.bticino.com site

6

The pull-down menu has the following options:

• New

Creates a new project

• Open

Opens an existing configuration file

• Save

Saves the current project

• Save as...

Saves the current project asking for a name for the file

• Exit

Exits the program

“File” menu

• Upload

It acquires and displays the current device configuration

• Download

Downloads the configuration to the device

• Update firmware

Updates the device firmware

• Request device info

Enables to display technical information

“Tools” menu

• Language

Can select the application language

“Language” menu

TiPolyxMemoryDisplay

User guide

7

“?” menu

• About...

It displays some TiPolyxMemoryDisplay program information

• Supported version

It displays the list of device firmware versions supported by the program in a table format

3.2 Connecting the device to a PC

To perform the Download configuration, Upload configuration, Firmware Update and Request

device info functions, the user must first connect the device to a PC, and ensure that the correct

port has been selected.

This operation must be performed as follows:

Connect a USB cable to the miniUSB connector of the device and a PC USB port.

To ensure that the communication is successful, the Polyx Memory Display must be connected to

the BUS, and must be powered.

No connection to the Polyx Memory Display is necessary when creating and saving a project.

USB-miniUSB

8

3.3 Download

It allows the user to send the project created to the device.

Procedure:

• Connect the device to a PC as shown in the corresponding section.

• From the Tools pull-down menu select Download.

The following window appears:

• Select Next.

• Select the Serial connection mode and click Next.

• Select the COM port to which the device is connected.

TiPolyxMemoryDisplay

User guide

9

3.4 Upload

It allows the user to receive the configuration from the device; once the configuration has been

acquired, this can be changed and saved, or it can be resent to the device.

Procedure:

• Connect the device to a PC as shown in the corresponding section.

• From the Tools pull-down menu select Upload.

This action will open a mask for the selection of the mode of connection to the device (for the con-

nection procedures see the Download section).

After selecting the connection mode, click “Next” to load the project currently installed on the de-

vice.

• After clicking Next the project is transferred to the device.

Display the

details of the

current download

It exports

the log file

Hide the details

of the current

download

Repeat the operation if unsuccessful

10

3.6 Request device info

It displays some information on the device connected to the PC.

Procedure:

• Connect the device to a PC as shown in the corresponding section.

• From the Tools pull-down menu select Request device info.

This action will open a mask for the selection of the mode of connection to the device (for the con-

nection procedures see the Download section).

After selecting the connection mode, click “Next” to open a screen showing the device hardware

and software features.

3.5 Update firmware

It allows the user to update the device firmware.

Procedure:

• Connect the device to a PC as shown in the corresponding section.

• From the Tools pull-down menu select Update firmware.

The following screen appears, prompting the user to search for the folder containing the firmware

file with extension .fwz (compressed file).

• Select the file and click Open to continue.

This action will open a mask for the selection of the mode of connection to the device (for the con-

nection procedures see the Download section).

TiPolyxMemoryDisplay

User guide

11

Pull-down menus Display

Save file

Remove object

Pushbutton menu

Navigation bar

Project items

Property/Project

4. Main screen

When the application is started, the main screen is displayed. This consists of 3 separate areas:

Project items, Display, and Property/Project.

The top section of the screen shows the menus and pushbuttons used for the management of the

project; The centre section, split into three areas, is where the configuration of the device Home Page is

performed.

Navigation bar

Navigation through the sub-pagesHome

Go to the

object

Cut object

12

4.1 Project items area

In this area the user can select the objects that will be included in the pages and sub-pages of the

device.

The objects are split into the following categories, based on their functions:

• Communication

• Home automation

• Advanced.

Click the corresponding label to make the category objects available.

4.2 Display area

The Display area shows the future setup of the device Home Page.

This page consists of 6 icons. The f t 5 can be customised. The last one is the Settings icon (which

cannot be customised or removed).

The full list of the available objects and their configurations can be found in the relevant sections,

while the modes of use are described in the Home Page section.

MANI LIBERE

TiPolyxMemoryDisplay

User guide

13

4.3 Property/Project Area

This area is split into two sections, which can be selected by clicking the labels in the bottom area.

The Property section shows the configuration fields for the object currently selected in the Display

area.

The Project section displays the objects by page in a tree menu format. In addition to selecting the

objects, the user can also navigate through the project, selecting any available sub-pages.

Page parameters

Page description

Selected object

parameters

Parameters description

Property/project

selection label

Home Page

Sub-page

14

5. Project

configuration

The configuration of a project may be completed in different ways, for example by creating a totally

new project, and uploading it on the device, or, after acquiring, and if necessary modifying, the

configuration of the device, by saving the project in the PC and exporting it to the device at a later

stage. It is also possible to export a project in .csv format, and then import it in Microsoft Excel ®.

5.1 Home Page

Using the Home Page it is possible to create the device Menu. To do so, drag the objects from the

Project Items area into the Display area, and configure them in the Property/Project Area.

Sub-pages

Some objects are used for connection to other pages, where correlated objects are grouped to-

gether (e.g. Scenarios).

TiPolyxMemoryDisplay

User guide

15

When one of these objects is included in the Home Page, the arrow will be highlighted, to indicate

that a sub-page has been added. Click this arrow to access the new page, where further objects could

also be inserted.

In the tree structure, these objects are marked with the

icon.

Sub-page

object

Sub-page

Go to the sub-page

16

5.2 Communication - Available functions and their configuration

This group includes the objects of the basic door entry system functions.

Object description

Configuration

Camera activation

Camera

Staircase light switching on

Staircase lights

Conversation with other system

handsets

Intercom

Cyclical activation of the system

cameras

Camera cycling

Connection to a page where the

user can include communication

specific objects

Communication

Opening of a door lock

Open door

Enter the

description

TiPolyxMemoryDisplay

User guide

17

Configuration

Enter the address:

• Camera

• Camera from which cycling should start

• Handset with which to communicate

• Lock to open

Enter the description

18

5.3 Home automation - Available functions and their configuration

This group includes the objects of the home automation functions.

Object description

Configuration

Alarms

Information on the status of the

burglar alarm system

Alarms

Temperature control system man-

agement (up to 99 zones)

Temp. control 99 zones

Temperature control system man-

agement (up to 4 zones)

Temp. control 4 zones

Activation of the scenario saved in a

scenario module

Scenario module

Sound system management

Sound system

Execution of a scenario saved in a

scenario programmer

Start scheduled scen.

Activation of the scenarios saved in

a scenario central unit

Scenario central unit

Multichannel sound system man-

agement

Multichannel sound system

Interruption of a scenario saved in a

scenario programmer

Stop scheduled scen.

Connection to a page where to in-

sert scenario objects

Scenarios

Enter the zone

description

Enter the auxiliary

channel description

Zone

presence

Type of

auxiliary

channel

Auxiliary channel

presence

TiPolyxMemoryDisplay

User guide

19

Sound system

Add amplifier

Add source

Enter the

description

Enter the

amplifier

address

Enter the source address

Enter the source

description

20

Enter the address of

the module or the

scenario central unit

Enter the CEN

control address

Enter the description

Scenario no.

Scenarios

Scheduled scenarios

Page is loading ...

Bticino 344163 User manual

Bticino 344163 User manual

Related papers

Other documents