2. Toro
  3. Dirt Stakes, 2024 Directional Drill
Dirt Stakes, 2024 Directional Drill

Toro Dirt Stakes, 2024 Directional Drill, Dirt Stakes, 4045 Directional Drill, Rock Stakes, 2024 Directional Drill, Rock Stakes, 4045 Directional Drill Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Dirt Stakes, 2024 Directional Drill Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • How many people are needed for installation?
    What is the first step for installing the stakes?
    How do you unlatch and open the stake-down cage door?
    What needs to be removed to detach the existing stakes?
    How should the new stakes be installed?
    Is there a need for special action after installing the stakes?
FormNo.3377-825RevA
RockandDirtStakes
2024or4045DirectionalDrill
ModelNo.23802
ModelNo.23804
ModelNo.23827
ModelNo.23829
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
Thisproductcontainsachemicalorchemicals
knowntotheStateofCaliforniatocausecancer,
birthdefects,orreproductiveharm.
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
RockorDirtstake2
Installthestakesforthe2024directionaldrill.
RockorDirtstake2
Installthestakesforthe4045directionaldrill.
InstallingtheStakesforthe
2024DirectionalDrill
Note:Using2peoplemakesiteasiertoinstallthestakes.
1.Positionthethrustframe25.4cm(12inches)offthe
ground,withthestakesintheupposition.
Figure1
1.Thrustframe2.Stake-downcage
2.Unlatchandopenthestake-downcagedoor(Figure2).
3.Whileholdingthestakes,removetheo-ringsandpins
securingthestakestothemotors(Figure2).
4.Removetheexistingstakes.
5.Installthenewstakesbyaligningtheholeinthestake
withtheholeinthemotorandsecureitwiththe
o-ringsandpinspreviouslyremoved.
6.Closeandlatchthestake-downcage.
©2013—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
*3377-825*A
g022384
1
2
3
4
Figure2
1.Motor
3.Stake
2.O-ringandpin4.Stake-downcage
InstallingtheStakesforthe
4045DirectionalDrill
Note:Using2peoplemakesiteasiertoinstallthestakes.
1.Positionthethrustframe25.4cm(12inches)offthe
ground,withthestakesintheupposition.
1
2
G022397
Figure3
1.Thrustframe2.Stake-downcage
2.Unlatchandopenthestake-downcagedoor(Figure4).
3.Whileholdingthestakes,removethepinsande-clips
securingthestakestothemotors(Figure4).
4.Removetheexistingstakes.
5.Installthenewstakesbyaligningtheholeinthestake
withtheholeinthemotorandsecureitwiththepins
ande-clipspreviouslyremoved.
6.Closeandlatchthestake-downcagedoor.
g0231 18
2
3
4
1
Figure4
1.Motor
3.Stake
2.Pinande-clip
4.Stake-downcage
2
/