Feiss WB1341 Installation guide

Type
Installation guide
1
Installation Instructions for
Temporarily install the mounting plate to the junction box.
Mark the anchor hole locations on the mounting plate and remove the mounting plate.
Drill appropriate size holes at the marked locations and install the anchors.
Secure the mounting plate to the junction box.
Screw the anchor screws into the anchors.
Connect the fixture to a suitable ground in accordance with local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Mount the fixture base onto the mounting plate and secure it with the set screw using an Allen key.
Install the plate to the fixture and secure it in place using the cap screws.
Install the diffuser by carefully sliding it into the bracket until secure.
1
2
3
1A
4
5
Barrington Wall (LED)
1.0
WB1341-LED
WB1341-LED
Wall
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliantNEC
junction boxes.
This product is safety listed for damp locations.
For a complete list of dimmers, visit out website at www.Feiss.com
JUNCTION BOX
MOUNTING
PLATE
7
8
ALLEN KEY
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
ANCHOR
SCREW
ANCHOR
BRACKET
5
9
6
7
8
9
SET SCREW
3
53
DIFFUSER
11
10
PLATE AND
CAP SCREW
10
11
SAVETHESE INSTRUCTIONS!
4
7400 Linder Ave, Skokie, 160077IL
800.969.3347
www.Feiss.com
© 2017 Feiss.All rights reserved.The "Feiss" graphic is a
registered trademark of Feiss. Feiss reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Feiss WB1341 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI