Intermec 700 Series 730B Operating instructions

Instructions

P/N 962-054-044

Revision B

August 2006

700 Mobile Computer Scanner Handle

*962054044B*

P/N 962054044B

Assembly Diagram

The 714-502-004 Kit includes:

" Scanner Handle

" Two #6--32 custom handle-to-computer retaining screws

Insert 700 Mobile Computer in Scanner Handle by

sliding in as shown by the pointer arrow.

Turn the Scanner Handle assembly over to insert

the two Mobile Computer retaining screws.

Retaining screws (one on each side)

The Scanner Handle Assembly provides access to the

connectors on the bottom of the Mobile Computer.

If using a handle strap attached to the Scanner Handle,

install an eye -hook type that snaps over the pin on the

Scanner Handle.

Handle strap pin

If using the retaining screws, it’s recommended to

unhook the hand strap from the back of the Mobile

Computer. This allows access to the battery pack

without removing the c omputer from Scanner

Handle.

This manual is also suitable for

Download PDF