2. Intermec
  3. 700 Series 700

Intermec 700 Series 700, 700 Series 700CNI, 700 Series 730B, 700 Series 761B, 741A, 751B Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Intermec 700 Series 700 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Instructions
P/N 962-054-044
Revision B
August 2006
700 Mobile Computer Scanner Handle
*962054044B*
P/N 962054044B
Assembly Diagram
The 714-502-004 Kit includes:
" Scanner Handle
" Two #6--32 custom handle-to-computer retaining screws
Insert 700 Mobile Computer in Scanner Handle by
sliding in as shown by the pointer arrow.
1
2
Turn the Scanner Handle assembly over to insert
the two Mobile Computer retaining screws.
Retaining screws (one on each side)
The Scanner Handle Assembly provides access to the
connectors on the bottom of the Mobile Computer.
3
If using a handle strap attached to the Scanner Handle,
install an eye -hook type that snaps over the pin on the
Scanner Handle.
Handle strap pin
If using the retaining screws, it’s recommended to
unhook the hand strap from the back of the Mobile
Computer. This allows access to the battery pack
without removing the c omputer from Scanner
Handle.
/