Mellanox Technologies SX1710 Quick Installation Manual

Mellanox Technologies
Brand
Mellanox Technologies
Model
SX1710
Type
Quick Installation Manual

This manual is also suitable for

Mellanox Technologies SX1710 is a high-performance 1U switch system designed for data centers and enterprise networks. It offers flexible and scalable solutions with a choice of 10/25/40/50/100GbE ports and supports advanced features like VXLAN, NVGRE, and MPLS. The SX1710 is ideal for building high-density, low-latency networks for cloud computing, virtualization, and storage applications.

Mellanox Technologies SX1710 is a high-performance 1U switch system designed for data centers and enterprise networks. It offers flexible and scalable solutions with a choice of 10/25/40/50/100GbE ports and supports advanced features like VXLAN, NVGRE, and MPLS. The SX1710 is ideal for building high-density, low-latency networks for cloud computing, virtualization, and storage applications.

www.mellanox.com
Mellanox Ethernet
1U Switch Systems
Quick Installation Guide
Models: SX1710, SX1410, SN2700
2
Pay Attention!
• At least two people are required to safely mount the system in the rack.
• All servers and systems in the rack should be planned with the airflow
direction. All FRU components must have the same air flow direction. A
mismatch in the air flow will affect the heat dissipation.
• The part of the system to which you choose to attach the rails will
determine the system’s adjustable side. The system’s part to which the
brackets are attached will be adjacent to the cabinet.
•The FRU side is extractable. Mounting the rack brackets inverted to the
FRU side will allow you to slide the FRUs, in and out.
Package Contents
•1 x System
• Rail Kit for short depth (17”-24” / 432-610mm) or standard depth (24”-
34” / 610-863mm) racks
• 2 x Power cables – Type C13-C14
• 1 x Harness RS232 2M cable – DB9 to RJ-45
• 2 x Cable retainers
•Quick Start Guide
If anything is damaged or missing, contact your Mellanox representa-
tive at [email protected].
3
Package Contents
8X
8X
4X
1X
1X
2X
2X
2X
2X
2X
Mellanox Technologies
4
1
2
Mellanox Technologies
5
3
4
Mellanox Technologies
6
5
6
7
Connector (Front) Side
FRU (Rear) Side
* It may take up to five minutes to turn on the system. If the System Status LED shows red after
five minutes, unplug the system and contact your Mellanox representative.
** Certain systems have a single management port.
LED Assignments
8
Configuration
1. Connect the host PC to the Console (RJ-45) port.
2. Configure a serial termin
al program.
Parameter Settings
Baud rate 115200
Data bits 8
Stop bits 1
Parity None
Flow control None
3. Log in:
OS Username Password
MLNX-OS admin admin
ONIE
a
a. No log in is required. Press Enter to activate the Console.
, 1
- -
4. Initial configuration
a. MLNX-OS: Go through the configuration wizard. For further information, please refer to:
http://www.mellanox.com/page/mlnx_os
b. ONIE
1
: Please refer to ONIE User Manual (www.mellanox.com-->Products--> Ethernet Switch Systems
-->SN2000 Series
For full installation instructions, go to http://www.mellanox.com/-->Products-->
Ethernet Switch Systems.
1. ONIE OS runs on top of SN2700/SX1710 switch systems only.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Mellanox Technologies SX1710 Quick Installation Manual

Mellanox Technologies
Brand
Mellanox Technologies
Model
SX1710
Type
Quick Installation Manual
This manual is also suitable for

Mellanox Technologies SX1710 is a high-performance 1U switch system designed for data centers and enterprise networks. It offers flexible and scalable solutions with a choice of 10/25/40/50/100GbE ports and supports advanced features like VXLAN, NVGRE, and MPLS. The SX1710 is ideal for building high-density, low-latency networks for cloud computing, virtualization, and storage applications.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents