Qlogic InfiniPath QHT7140 Quick start guide

Type
Quick start guide
[ Quick Start Guide ]
QUICK START GUIDE
INFINIPATH HCA INSTALLATION d
QHT7140
Purchasers of OEM products should consult with the OEM for support.
Support Headquarters QLogic Corporation
12984 Valley View Road
Eden Prairie, MN 55344-3657
QLogic Web Site www.qlogic.com
Technical Support Web Site support.qlogic.com
Technical Support Email [email protected]
Technical Training Email [email protected]
North American Region
Phone +1 952-974-4910
Fax +1 952-932-4018
Europe, Middle East, and Africa Region
Phone Numbers by Language +353 1 6924960 — English
+353 1 6924961 — Français
+353 1 6924962 — Deutsch
+353 1 6924963 — Español
+353 1 6924964 — Português
+353 1 6924965 — Italiano
Asia Pacific Region
Phone Numbers by Language +63-2-885-6712 — English
+63-2-885-6713 — Mandarin
+63-2-885-6714 — Japanese
+63-2-885-6715 — Korean
Latin and South America Region
Phone Numbers by Language +52 55 5278 7016 — English
+52 55 5278 7017 — Español
+52 55 5278 7015 — Português
1
Quick Start Guide
Installation Instructions
This Quick Start Guide describes how to install and configure your new QLogic InfiniPath QHT7140 host channel adapter
(HCA) in three simple steps:
Step 1. Verify the package contents.
Step 2. Install the HCA hardware.
Step 3. Install the InfiniPath software.
Keep the HCA in the antistatic bag until installation. The HCA contains parts that can be damaged by
electrostatic discharge (ESD). Before handling the HCA, use standard methods to discharge static
electricity. Place the HCA on the bag when examining it. Retain the bag for future use.
NOTE: The QLogic InfiniPath QHT7140 was formerly known as the PathScale HT-465.
Step 1. Verify the Package Contents
The QLogic InfiniPath HCA is shipped with the following items:
QLogic InfiniPath QHT7140 Adapter
Riser Card (not available in all models)
Slot 5 Faceplate (not available in all models)
Quick Start Guide (this document)
Step 2. Install the HCA Hardware
To install the HCA hardware, please refer to the instructions in the InfiniPath Install Guide. This document is available
on the QLogic web site at www.qlogic.com
.
Step 3. Install the InfiniPath Software
To install the InfiniPath software, please refer to the instructions in the InfiniPath Install Guide. This document is available
on the QLogic web site www.qlogic.com
.
CAUTION!
2
Troubleshooting and Technical Support
Refer to the InfiniPath Install Guide, the InfiniPath User’s Guide, and the Release Notes for information on installation
and use of InfiniPath HCAs and InfiniPath software. See the QLogic web site www.qlogic.com
.
The QLogic knowledge database contains troubleshooting information for the QLogic InfiniBand products. Access the
data base from the QLogic web site www.qlogic.com/support/knowledge_base.asp.
For technical support, visit our web site support.qlogic.com,
email us at [email protected], or call 952-932-4040.
Warranty
The QLogic InfiniPath Adapter comes with a standard three year QLogic warranty, or as specified by other agreements.
Please check the QLogic Web site at www.qlogic.com
for warranty details.
Product Regulatory Compliance
QLogic InfiniPath Interconnect Hardware Adapters
The following sections contain a summary of EMI test specifications performed on the InfiniPath Interconnect hardware
adapters to comply with radiated emission, product safety standards, and regulatory compliance markings.
EMI Requirements Compliance Statements
United States
FCC Part 15 compliance: Class A
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at their own expense.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operations.
Changes or modifications not expressly approved by QLogic could void the user’s authority to operate the equipment.
Canada
ICES-003 compliance: Class A
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numériqué de la classe A est conformé à la norme NMB-003 du Canada.
3
Europe
CE Mark 89/336/EEC (modified by 93/68/CEE), 73/23/EEC EMC Directive compliance:
WARNING!! This is a Class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
EN55022:1998(Amds A1:2000, A2:2003) Class A
EN61000-3-2: (A2:2005): 2000
EN61000-3-3: 2001
EN55024:1998, (Amds A1:2001, A2:2003)
EN60950-1:2001+A11
EN60825-1:1994+A1+A2
EN60825-2:2000
Japan
VCCI compliance: Class A
Japanese Language Format-Class A
English translation of the above statement:
This is class A product based on the standard of the Voluntary Control Council For Interference by Information Technology
Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble
occurs, the user may be required to take corrective actions.
Australia/New Zealand
AS/NZS CISPR22:2002 compliance: Class A
WARNING!! This is a Class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
Korea
MIC compliance: Class A
Product Name/Model InfiniPath Interconnect hardware adapters
Certification holder QLogic Corporation
Manufactured date Refer to date code listed on product
Manufacturer/Country of origin QLogic Corporation/USA
4
Korean Language Format-Class A
English translation of the above statement:
A class equipment (Business purpose info/telecommunications equipment). As this equipment has undergone EMC
registration for business purpose, the seller and/or the buyer is asked to beware of this point and in case a wrongful
sale or purchase has been made, it is asked that a change to household use be made.
Taiwan
BSMI Certification: Class A Certified
Chinese Language Format-Class A
English translation of the above statement:
WARNING!! This is a class A product. In domestic environments this product may cause interference, in which case
the user may be required to take adequate measures.
Product Safety Compliance
This QLogic InfiniPath Adapter is for use only with UL Listed computers.
UL, cUL product safety compliance:
UL60950-1
cUL (Canada Safety Agency C22.2. No. 60950)
CB Report:
EN60950:2001+A11
EN60825-1:1994+A1+A2
EN60825-2:1994+A1
Product Name/Model InfiniPath Interconnect hardware adapters
Certification holder QLogic Corporation
Manufactured date Refer to date code listed on product
Manufacturer/Country of origin QLogic Corporation/USA
© 2005–2007 QLogic Corporation. QLogic, the QLogic logo, the Powered by QLogic logo, SANbox, SANsurfer, and
SANsurfer Management Suite are registered trademarks or trademarks of QLogic Corporation. All other brands and
product names are trademarks or registered trademarks of their respective owners. Information supplied by QLogic is
believed to be accurate and reliable. QLogic Corporation assumes no responsibility for any errors in this brochure.
QLogic Corporation reserves the right, without notice, to makes changes in product design or specifications.
*IB6054501-00B*
J
QLogic Corporation 26650 Aliso Viejo Parkway Aliso Viejo, CA 92656
949.389.6000 www.qlogic.com
IB6054503-00 B
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Qlogic InfiniPath QHT7140 Quick start guide

Type
Quick start guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI