2
Troubleshooting and Technical Support
Refer to the InfiniPath Install Guide, the InfiniPath User’s Guide, and the Release Notes for information on installation
and use of InfiniPath HCAs and InfiniPath software. See the QLogic web site www.qlogic.com
.
The QLogic knowledge database contains troubleshooting information for the QLogic InfiniBand products. Access the
data base from the QLogic web site www.qlogic.com/support/knowledge_base.asp.
For technical support, visit our web site support.qlogic.com,
Warranty
The QLogic InfiniPath Adapter comes with a standard three year QLogic warranty, or as specified by other agreements.
Please check the QLogic Web site at www.qlogic.com
for warranty details.
Product Regulatory Compliance
QLogic InfiniPath Interconnect Hardware Adapters
The following sections contain a summary of EMI test specifications performed on the InfiniPath Interconnect hardware
adapters to comply with radiated emission, product safety standards, and regulatory compliance markings.
EMI Requirements Compliance Statements
United States
FCC Part 15 compliance: Class A
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at their own expense.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operations.
Changes or modifications not expressly approved by QLogic could void the user’s authority to operate the equipment.
Canada
ICES-003 compliance: Class A
❑ This Class A digital apparatus complies with Canadian ICES-003.
❑ Cet appareil numériqué de la classe A est conformé à la norme NMB-003 du Canada.