1
Thank you for purchasing this Merlin Product. Please read the
instruction manual carefully before using the product.
The documentation provided will allow you to fully enjoy all the
features this unit has to offer.
Please save this manual for future reference.
Instructions:
These Bluetooth headsets allow you to play music, take calls and more.
Power On/Off:
Press button for 3 seconds till blue light is on, and you hear a
sound.
To turn off, press button for 3 seconds till red light is on, and you
hear a sound.
Pairing:
After power on, press button for 3 seconds till blue and red lights
blink alternatively. Glasses will made a sound which means it is ready
to be paired.
Turn on Bluetooth of the device you would like to connect to the
headphones and search and select SonicShades’.
Pairing with a new Bluetooth device:
Glasses can only be found in Bluetooth mode so follow the
aforementioned steps.
Automatic Connection:
Once glasses have been connected to a Bluetooth device, it will
connect to the last device automatically after power on.
Volume Up/Down:
Click button . A sound will indicate when volume is at MAX.
To lower the volume click button.
Music Operation:
Play/Pause: Tap ‘touch zone’
Next song: Slide backwards on the ‘Touch Zone’
Previous song: Slide forwards on the ‘Touch Zone’
Phone call operation:
Answering a phone call –Slide backwards on ‘touch zone’
Reject or end a call – Slide forwards on ‘touch zone’
Answering a new call while on the call – Slide backwards on ‘touch
zone’ and the new call will be answered, while the other call will be
dropped automatically
Voice control:
Press on ‘touch zone’ for 3 seconds to activate voice control (Siri on
iPhone and phonetic assistance of Samsung)
Charging and low batter indication:
Charging voltage is 5V. Suggested use is 500mA charging current if
the charging current is less than 1A. USB cable used for charging
and the indicator light will turn red.
Low power reminder: LED flashes red and a noise will be heard.
Charging time: About 2 hours. When fully charged, red light turns
off.
FAQ
Q Why won’t my shades turn on?
Please ensure that the unit is charged completely before use
Q Why can’t I answer an incoming call?
Please ensure that you are sliding backwards correctly on the
‘touch zone’
Maintenance
1. Retain these instructions for future use.
2. Clean the product with a damp cloth and mild soap.
3. Do not expose this product to rain or moisture.
4. Be careful not to turn or twist the cables used in this product
too much as it can lead to malfunction and failure.
5. This product is not designed to be submerged in water and
will malfunction if this occurs.
6. This product has no user serviceable items inside. Do not
open this product as the user risk injury and would void the
warranty.
7. Keep unit away from strong magnetic fields to avoid
interference with the product.
3
/
