Merlin MFi8 Plus User manual

Merlin
Brand
Merlin
Model
MFi8 Plus
Category
Power banks
Type
User manual

Merlin MFi8 Plus

The Merlin MFi8 Plus is protective case for your iPhone 8 plus, featuring a 4000mAh battery bank incorporated into it to extend the life of the iPhone. It has a micro USB port for charging, and the LED's will flash as the device starts charging. To charge the iPhone, press the power button for longer that 3 seconds. The device will malfunction if submerged in water and has no user serviceable items inside. Keep unit away from strong magnetic fields to avoid interference with the product.

Merlin MFi8 Plus

The Merlin MFi8 Plus is protective case for your iPhone 8 plus, featuring a 4000mAh battery bank incorporated into it to extend the life of the iPhone. It has a micro USB port for charging, and the LED's will flash as the device starts charging. To charge the iPhone, press the power button for longer that 3 seconds. The device will malfunction if submerged in water and has no user serviceable items inside. Keep unit away from strong magnetic fields to avoid interference with the product.

1
Thank you for purchasing this Merlin Product. Please read the
instruction manual carefully before using the product.
The documentation provided will allow you to fully enjoy all the
features this unit has to offer.
Please save this manual for future reference.
Instructions
The Merlin iPhone 8 Case with Battery is a protective case for your
iPhone 8 plus. It has a 4000mAh battery bank incorporated into it to
extend the life of the iPhone.
Installation:
1) Before using the case please insert your phone into it.
2) Separate the bottom frame and cover. A fingernail can be used
to get an edge.
3) Slide your phone into the bottom frame ensuring the lightning
connector seats properly.
4) Gently push the top frame onto the bottom frame. It should
“click” into place. Don’t use excessive force as it can damage the
product.
Charging the case and iPhone:
1) Connect the case to any 5V/1A micro USB power supply for
charging.
2) The LED’s will start flashing as the device starts charging.
3) The LED’s will light up as the unit’s charge fill us as shown
below.
4) To charge the iPhone press the power button for longer that 3
seconds.
FAQs
Q) Why is my device not charging?
A) Make sure that the power bank has enough charge, and that your
device is properly connected.
Q) My device is charging but at a slow rate.
A) If your device is not charging properly and there’s one LED lit, this
might be a sign that the power level is very low and you need to
recharge your power bank.
Maintenance:
1. Retain these instructions for future use.
2. Clean the product with a damp cloth and mild soap.
3. Do not expose this product to rain or moisture.
4. Be careful not to turn or twist the cables used in this product
too much as it can lead to malfunction and failure.
5. This product is not designed to be submerged in water and will
malfunction if this occurs.
6. This product has no user serviceable items inside. Do not open
this product as the user risk injury and would void the
warranty.
7. Keep unit away from strong magnetic fields to avoid
interference with the product.
2
  • Page 1 1
  • Page 2 2

Merlin MFi8 Plus User manual

Merlin
Brand
Merlin
Model
MFi8 Plus
Category
Power banks
Type
User manual

Merlin MFi8 Plus

The Merlin MFi8 Plus is protective case for your iPhone 8 plus, featuring a 4000mAh battery bank incorporated into it to extend the life of the iPhone. It has a micro USB port for charging, and the LED's will flash as the device starts charging. To charge the iPhone, press the power button for longer that 3 seconds. The device will malfunction if submerged in water and has no user serviceable items inside. Keep unit away from strong magnetic fields to avoid interference with the product.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents