Abt PolyDrain Toggle Lock Installation guide

Type
Installation guide

Abt PolyDrain Toggle Lock is a pre-engineered surface drainage system designed for various applications. Its robust construction and versatility make it suitable for both residential and commercial projects. Here are some key features and use cases:

  • Durability: Made from durable materials, the system can withstand heavy loads and harsh weather conditions, ensuring longevity.

  • Flexibility: The modular design allows for customization to fit specific project requirements, including length, width, and depth.

  • Easy Installation: The toggle lock mechanism simplifies installation, reducing time and labor costs.

Abt PolyDrain Toggle Lock is a pre-engineered surface drainage system designed for various applications. Its robust construction and versatility make it suitable for both residential and commercial projects. Here are some key features and use cases:

  • Durability: Made from durable materials, the system can withstand heavy loads and harsh weather conditions, ensuring longevity.

  • Flexibility: The modular design allows for customization to fit specific project requirements, including length, width, and depth.

  • Easy Installation: The toggle lock mechanism simplifies installation, reducing time and labor costs.

PolyDrain
Pre-Engineered Surface Drainage
PDX - Toggle Lock
Installation Guide
P.O. Box 837 - 259 Murdock Road - Troutman, NC 28166
Tel (704) 528-9806 - Fax (704) 528-5478 - www.abtdrains.com
Toll free in the USA, Canada, and Mexico (800) 438-6057
BILL OF MATERIALS
DESCRIPTION
ITEM
Channel (Optional Btm. Outlet Shown)1
EPS Insert2
Angle Frame / Rail3
1802 Leg Bracket4
1/4"x3/8" Thread Forming Screw
5
5/16" x 3/4" Thread Forming Screw
6
Rebar U-Leg
7
End Rail8
Plain End Plate9
Inlet / Outlet End Plate10
Grate11
Grate Retainer Toggle
12
Grate Retainer Toggle Bolt UNC 5/1613
Grate Retainer Nut - 5/16" Square Nut
14
USEFUL OR REQUIRED TOOLS
COMPONENT IDENTIFICATION
6
4
2
7
5
8
9
11
14
12
13
3
3
1
10
Some products sold by ABT contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Products sold by ABT may
contain these chemicals in a smaller amount than Proposition 65's concern, or not at all, however, we have chosen to issue this warning on all of our products as an
act of caution and because our customers have the right to know.
WARNING: These products can expose you to chemicals such as nickel, lead, chromium, cobalt, styrene, methylene chloride, or silica, which are
known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
3. SUPPORT LUMBER ATTACH
4. DISCHARGE PLACE & ALIGN
Locate and Align Outlet Channel First. Start
at Deep End and Work to Shallow End.
2. LEG ATTACH
1. EXCAVATION
T = per Structural Engineer
5. CHANNEL PLACE & ALIGN
6. RAIL CONNECTION
Tie Wire
Blank or Horiz. Outlet
End Plate (as Specified)
End Rail
Grade Stake
Caulk or Adhesive
(as Specified)
Vertical Outlet Piping
(as Specified)
Set Top of Rails to
Finished Elevation
T T
T
1/2" Min
Above Dirt
2" Min.
Anchor Slab
Above U-Leg
Finished Grade
Elevation
Support
Lumber
Caulk Channel Joints as Specified
Locate and Drive Grade
Stakes Where Needed
Align and Set Channels to Grade.
Secure to Grade Stakes.
Install Remaining Leg
Bracket Screws After
Positioning Channels
12. GRATE INSTALLATION
11. FLOOR CONCRETE PLACEMENT
9. FINAL ALIGN & U-LEG TRIM
10. ENCAPSULATION CONCRETE
PLACEMENT & CONSOLIDATION
8. PLACE ANCHOR SLAB
See Step 1 for Dimensions
7. END PLATE
Verify Trench Alignment
and Elevation
Cut Excess Length
from U-Legs
Use Vibrator to Consolidate
Concrete
Place Evenly
Both Sides
Batter Boards
as Required
Remove Suspension
Lumber as Required
Expansion Joint Material
per Structural Engineer
Remove Foam After
Concrete Placement
Rotate Toggle to Clear Angle
Rails During Grate Placement
Nut Nubs on
Bottom of Toggle
Tighten Screw Until
Toggle Bottoms on Grate
Blank or Inlet End
Plate (as Specified)
Attach End Plate
to Channel with
Adhesive, Caulk
or Duct Tape
REV 030719.00
Locate Grates to
have 1/8" [3 mm]
Gap Between Ends
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Abt PolyDrain Toggle Lock Installation guide

Type
Installation guide

Abt PolyDrain Toggle Lock is a pre-engineered surface drainage system designed for various applications. Its robust construction and versatility make it suitable for both residential and commercial projects. Here are some key features and use cases:

  • Durability: Made from durable materials, the system can withstand heavy loads and harsh weather conditions, ensuring longevity.

  • Flexibility: The modular design allows for customization to fit specific project requirements, including length, width, and depth.

  • Easy Installation: The toggle lock mechanism simplifies installation, reducing time and labor costs.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI