RAB Lighting LFRB6P Operating instructions

Brand: RAB Lighting

Model: LFRB6P

Type: Operating instructions

This manual is also suitable for

RAB Lighting LFRB6P

RAB Lighting LFRB6P is a lens frame kit that can be used with RBAY housings. It includes a clear acrylic lens frame with three hinges attached, three door clips, and three 8-32 x 1/2” stainless steel machine screws. The hinge hardware bag includes six 8-32 x 5/16” self-tapping machine screws and six clip screws.

The lens frame kit is easy to install. First, attach the hinges to the RBAY housing using the stainless steel screws. Next, attach the door clips to the lens frame using the clip screws. Finally, attach the lens frame to the hinges.

RAB Lighting LFRB6P

LFRB4P LFRB6P LENS FRAME RBAY

(3) Door Clips

LENS FRAME KIT CONTENTS

(1) Clear Acrylic Lens Frame with (3) Hinges

attached

Clip Hardware Bag

(3) Door Clips

(3) 8-32 x 1/2”

Stainless Steel Machine Screws

Hinge Hardware Bag

(6) 8-32 x 5/16” Self-taping Machine Screws

IMPORTANT

READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.







WARNING: 





(3) Clip Screws

Clip Hardware Bag

Hinge Hardware Bag

(6 ) Clip Screws

LFRB4P LFRB6P LENS FRAME RBAY



CLEANING



.













INSTALLATION

 Lens Frame

Hinges.

2. Stainless Steel Screws.

3. 

Door Clips.

4. Door Clip



5. HingesDoor Clips

.

(3) Hinge

(6) Stainless

Steel Screws

Lens Frame

Door Clip



RELAMPING

 Clip Screws



2. Lens Frame.

3. Lens Frame.

4. ClipsClip Screws

Door Clip

Clip Screw

Lens Frame

GDRB GUARD

Note: These instructions do not cover all details or variations in equipment

nor do they provide for every possible situation during installation, operation

or maintenance.

Thank you for buying RAB lighting ﬁ xtures. Our aim is to design the best

quality products to get the job done right. We’d like to hear your comments.

Call the Marketing Department at 888-RAB-1000, or

email: market[email protected]

IMPORTANT

READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE

INSTRUCTIONS FOR FUTURE REFERENCE.

RAB ﬁ xtures must be wired in accordance with the National Electrical

Code and all applicable local codes. Proper grounding is required for

safety. This product must be installed in accordance with the applicable

installation code by a person familiar with the construction and operation

of the product and the hazards involved.

WARNING: Make certain power is OFF before installing or

maintaining ﬁ xture.

CLEANING

CAUTION: Be sure ﬁ xture temperature is cool enough to

touch. Do not clean or maintain while ﬁ xture is energized.

GDRB GUARD

Installation

Wire Guard mounts with (6)

clips and screws to the RBAY

housing as shown. Screws and

clips are provided with guard.

Note: These instructions do not cover all details or variations in equipment

nor do they provide for every possible situation during installation, operation

or maintenance.

Thank you for buying RAB lighting ﬁ xtures. Our aim is to design the best

quality products to get the job done right. We’d like to hear your comments.

Call the Marketing Department at 888-RAB-1000, or

email: market[email protected]

IMPORTANT

READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE

INSTRUCTIONS FOR FUTURE REFERENCE.

RAB ﬁ xtures must be wired in accordance with the National Electrical

Code and all applicable local codes. Proper grounding is required for

safety. This product must be installed in accordance with the applicable

installation code by a person familiar with the construction and operation

of the product and the hazards involved.

WARNING: Make certain power is OFF before installing or

maintaining ﬁ xture.

CLEANING

CAUTION: Be sure ﬁ xture temperature is cool enough to

touch. Do not clean or maintain while ﬁ xture is energized.

GDRB-IN-0110 GDRB-IN-0110

Installation

Wire Guard mounts with (6)

clips and screws to the RBAY

housing as shown. Screws and

clips are provided with guard.

RAB Lighting LFRB6P Operating instructions

Brand: RAB Lighting

Model: LFRB6P

Type: Operating instructions

This manual is also suitable for

RAB Lighting LFRB6P

Download PDF

report

RAB Lighting LFRB6P Operating instructions

This manual is also suitable for

RAB Lighting LFRB6P Operating instructions

Related papers