8pc Raised Garden Bed 11293 Instructions for Use
Please read and retain these instructions for future reference v001: 03/12/18
Parts: 8x boards 8x stakes
Size 1 tier assembly:
115cm x 115cm x 13cm
Size 2 tier assembly:
57.5cm x 57.5cm x26 cm
Mark area for bed and dig it over.
Place boards in position and place stakes into the
ground.
Once square is complete, hammer stakes into the
ground -
until flush with the tops of the boards.
Fill the raised bed with good quality topsoil mixture
enriched with fertilizer and compost.
Make sure to compact the soil with a spade as you
fill up. Add soil so it is level with the top of the
frame.
8pc Raised Garden Bed 11293 Instructions for Use
Please read and retain these instructions for future reference v001: 03/12/18
The soil will eventually drop as it settles. After a year
top up soil to keep the depth and to give nutrient
boost for optimum growing.
Two tier assembly:
For two tier assembly put two boards on top of each other and connect 2 stakes as shown in illustration.
DISPOSAL
• Dispose of all packaging, paper, cartons, plastic and plastic bags in accordance with your local
recycling regulations.
• At the end of the product’s lifespan please dispose of it at an authorised household waste recycling
centre.
/
