SKYDANCE T11-1 User manual

SKYDANCE
Brand
SKYDANCE
Model
T11-1
Category
Stroboscopes & disco lights
Type
User manual

SKYDANCE T11-1 is a touch panel that allows for the control of up to four zones of single-color LED lighting. It can be used as a DMX512 master or as a 2.4G RF remote.

As a DMX512 master, the T11-1 can control up to 20 channels of DMX data, which is sufficient for controlling up to four zones of single-color LED lighting. The T11-1 can also be used as a 2.4G RF remote to control multiple Skydance 2.4G LED controllers. This allows for the control of multiple zones of LED lighting from a single remote.

SKYDANCE T11-1 is a touch panel that allows for the control of up to four zones of single-color LED lighting. It can be used as a DMX512 master or as a 2.4G RF remote.

As a DMX512 master, the T11-1 can control up to 20 channels of DMX data, which is sufficient for controlling up to four zones of single-color LED lighting. The T11-1 can also be used as a 2.4G RF remote to control multiple Skydance 2.4G LED controllers. This allows for the control of multiple zones of LED lighting from a single remote.

● Touch panel 4 zone 1-5 color DMX512 master, can also be used as 4 zone 1-5 color RF remote.
● DMX signal output, comply to standard DMX512 protocol, compatible with DMX decoder from any supplier.
● When used as RF remote, each zone can remote control multiple Skydance’s 2.4G LED controllers.
● Ultra sensitive high strength glass touch panel with touch color slide in the middle and backlighting.
● Smooth and accurate color adjustment by touching the color slide.
● Touch keys with chord tones and LED indicator.
Touch key + RF 2.4GHz
256 levels
0 -100%
Ta: -30
O
C ~ +55
O
C
T c:
+85
O
C
LVD RED
RGB+CCT
T15-1
20
Output signal
DMX512, RF 2.4GHz
Input voltage
85-265VAC
Input current
Max 0.1A
Operation temperature
Case temperature (Max.)
Environment
IP20
IP rating
Dimming data
Dimming range
30m
Technical Parameters
Input and Output
Safety and EMC
EMC standard (EMC) EN301 489,EN 62479
Radio Equipment(RED)
EN300 328
Certification
CE,EMC,LVD,RED
EN60950
Safety standard(LVD)
Warranty
5 years
Warranty
Input signal
RF Control distance
Dimming level
Model No.: T11-1,T12-1,T13-1,T14-1, T15-1
4 Zone/1-5 color/Glass touch panel/Color slide/AC input/DMX 512 and RF 2.4G signal output
Features
Wall Mounted Touch Panel
T14-1T13-1
T12-1
T11-1
Light type
Output DMX channel number
Model No.
T14-1
T13-1
T12-1
T11-1
Dual color
RGB
RGBW
4
8
12
16
T15-1
Single color
User Manual Ver 1.0.4
www.iskydance.com
Page 1
Mechanical Structures and Installations
LN
GND
D+ D-
DMX OUTPUT
INPUT
85-265VAC
T11-1/ T12-1/T13-1
T14-1 / T15-1
DMX output +
DMX output -
DMX signal GND
AC input L
AC input N
11.5mm
86mm
86mm
59mm
6
2mm
35mm
45.5mm
Typical base as below:
European style
86 size
Touch panel Baseplate
Base
Uninstall
Installation diagram:
T11-1 Single color panel
T12-1 Dual color panel
Zone
Zone
Zone
Zone
Scen e
Scen e
Scen e
Powe r
Short press turn on zone light and select zone simultaneously, long press 2s turn off zone light.
4 zone control seperately or synchronously, each zone could control multiple receivers.
Short press recall scene. Long press 2s to save the current state into 1/2/3.
Swit ch
Scen e
Scen e
Zone
Zone
Zone
Zone
Powe r
Switch between color temperature / brightness slide
Color temperature / Brightness slide.
Brightness slide.
Zone
Zone
Zone
Zone
Scene Scene Scene
Power
Turn on/off all zone light.
Power
Turn on/off all zone light.
Switch
Zone
Zone
Zone
Zone
Short press turn on zone light and select zone simultaneously, long press 2s turn off zone light.
4 zone control seperately or synchronously, each zone could control multiple receivers.
Short press recall scene. Long press 2s to save the current state into 1/2.
Scene Scene
Key function
User Manual Ver 1.0.4
www.iskydance.com
Page 2
T11-1,T12-1,T13-1,T14-1, T15-1 Wall Mounted Touch Panel
Note: After touch power key to turn off light, long press power key for 5 seconds will turn on or turn off tone.
T15-1 RGB+CCT panel
Zone
Zone
Zone
Zone
T13-1 RGB panel
Zone
Powe r
Zone
White
Zone
Zone
Mode
W
Brt/ Sp ee d
T14-1 RGBW panel
ZONE
ZONE
ZONE
ZONE
1
2
3
4
T11-1,T12-1,T13-1,T14-1, T15-1 Wall Mounted Touch Panel
Brig ht
Mode
Spee d
Powe r
Mode
Speed
Bright
Short press play 10 built-in mode, long press 2s run mode-cycle.
Adjust dynamic mode speed or RGB color saturation, 10 levels.
Adjust brightness, 10 levels.
Color slide.
Power
Turn on/off all zone light.
Zone
Zone
Zone
Zone
Short press turn on zone light and select zone simultaneously, long press 2s turn off zone light.
4 zone control seperately or synchronously, each zone could control multiple receivers.
Mode
Short press play 10 built-in mode, long press 2s run mode-cycle.
Color slide.
Power
Turn on/off all zone light.
Zone
Zone
Zone
Zone
Short press turn on zone light and select zone simultaneously, long press 2s turn off zone light.
4 zone control seperately or synchronously, each zone could control multiple receivers.
White
W
Brt/Spe ed
Adjust dynamic mode speed or static color brightness,10 levels.
Short press turn on/off W channel, long press adjust W channel brightness.
POWE R
SWIT CH
M
BRT/SPEED
MODE
Mode
Short press play 10 built-in mode, long press 2s run mode-cycle.
RGB color / Color temperature slide.
Power
Turn on/off all zone light.
Zone
Zone
Zone
Zone
Short press turn on zone light and select zone simultaneously, long press 2s turn off zone light.
4 zone control seperately or synchronously, each zone could control multiple receivers.
Brt/Spe ed
Adjust dynamic mode speed or static color brightness,10 levels.
SWIT CH
Switch between RGB color / Color temperature slide.
User Manual Ver 1.0.4
www.iskydance.com
Page 3
D4-L
DMX512 & RDM Decoder
D+ D- D-D+
AC100-240V
Power Supply
12-24VDC
Constant Voltage
LN
INPUT
85-2 65 VAC
AC85-265V
GND
D+ D-
DMX OU TP UT
DMX signal
T14-1
Wiring Diagram for touch panel work as DMX512 master
Touch Panel work as DMX512 Master
After connect with DMX decoders, please set the DMX decoders address as below:
+
For T14-1 RGBW panel
Each zone 4 channel:
zone 1 is channel 1 ~ 4,
zone 2 is channel 5 ~ 8,
zone 3 is channel 9 ~ 12,
zone 4 is channel 13 ~ 16,
channel 1,5,9,13 is R,
channel 2,6,10,14 is G,
channel 3,7,11,15 is B,
channel 4,8,12,16 is W.
RGBW LED strip
R
G
B
W
CWCW
Zone 1 DMX decoder’s address
Model No.
T14-1
T13-1
T12-1
T11-1
1 2
1 2 3
1 2 3 4
2
3 4 4 5 6
5 6 7 8
Zone 2 DMX decoder’s address
Zone 3 DMX decoder’s address
Zone 4 DMX decoder’s address
1
5 6 7 8 9 9 10 11 12
4
7 8 10 11 12
13 14 15 16
3
WW CW
R G B
R G B W
T15-1
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
R G B WW CW
User Manual Ver 1.0.4
www.iskydance.com
Page 4
T11-1,T12-1,T13-1,T14-1, T15-1 Wall Mounted Touch Panel
Touch Panel work as RF remote (two match ways)
Use the controller’s Match key
Match:
Short press match key, immediately press Zone
key of the touch panel.
Use Power Restart
Match:
Switch off the power of the receiver, then switch on power again,
immediately short press Zone key 3 times on the touch panel.
The light blinks 3 times means match is successful.
.
Delete:
Switch off the power of the receiver, then switch on power again,
immediately short press Zone key 5 times on the touch panel.
The light blinks 5 times means all matched remotes were deleted.
Delete:
Press and hold match key for 5s to delete all match,
The light blinks 5 times means all matched remotes
were deleted.
End user can choose the suitable match/delete ways. Two options are offered for selection:
Wiring Diagram for touch panel work as RF remote
LN
INPUT
85-2 65 VAC
AC85-265V
GNDD+ D-
DMX OU TP UT
T11-1/ T12-1/T13-1
T14-1 / T15-1
Malfunctions analysis & troubleshooting
Causes
Troubleshooting
1. No power.
2. Wrong connection or insecure.
1. Check the power.
2. Check the connection.
1. DMX decoder first address error.
2. Wrong connection of output wires.
1. Check the DMX first address.
2. Reconnect output wires.
Wrong color
Malfunctions
No light
User Manual Ver 1.0.4
www.iskydance.com
Page 5
T11-1,T12-1,T13-1,T14-1, T15-1 Wall Mounted Touch Panel
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

SKYDANCE T11-1 User manual

SKYDANCE
Brand
SKYDANCE
Model
T11-1
Category
Stroboscopes & disco lights
Type
User manual

SKYDANCE T11-1 is a touch panel that allows for the control of up to four zones of single-color LED lighting. It can be used as a DMX512 master or as a 2.4G RF remote.

As a DMX512 master, the T11-1 can control up to 20 channels of DMX data, which is sufficient for controlling up to four zones of single-color LED lighting. The T11-1 can also be used as a 2.4G RF remote to control multiple Skydance 2.4G LED controllers. This allows for the control of multiple zones of LED lighting from a single remote.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents