2. JasonL
  3. QCWS0800.W.ME

JasonL QCWS0800.W.ME, QCWS1000.W.ME Operating instructions

  • Hello, I've reviewed the assembly instructions for the Quadro Wood CT Single Legs table. The document outlines the steps for a proper setup, including the required tools and the two-person installation process. I'm ready to answer any questions you have about assembling this table.
  • How many people are required for the installation?
    What tools are required for assembly?
    What type of screws are used to attach the legs?
    What type of screws are used to attach the table top?
ASSEMBLY INSTRUCTIONS
Quadro Wood CT
Single Legs
Sizes: 800D, 1000D
Page 1 of 5
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver; Allen key set (provided)
2 persons required for installation
ASSEMBLY INSTRUCTIONS
Quadro Wood CT
Single Legs
Table top x1
Counter table Leg Quadro Wood x4
A
B
Allen key x1E
Wood Screws x16
M6x30mm Mushroom head screws x4
C
D
COMPONENTS
SCREWS
Page 2 of 5
Need help!
Call us on
1300 527 665
www.jasonl.com.au
A
BC D
ASSEMBLY INSTRUCTIONS
Quadro Wood CT
Single Legs
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Page 3 of 5
Using Allen Key provided, attach Mushroom Head Screw (D)
for all legs as shown in the illustration.
STEP 01
D
B
TOP
VIEW
FRONTAL
VIEW
ASSEMBLY INSTRUCTIONS
Quadro Wood CT
Single Legs
Page 4 of 5
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Ask a second person to help turn the table and base over.
Screw the table tops to the bases using woodscrews (C)
through the following holes.
STEP 02
C
A
ASSEMBLY INSTRUCTIONS
Quadro Wood CT
Single Legs
Page 5 of 5
Need help!
Call us on
1300 527 665
www.jasonl.com.au
If you purchased with wheels
Ask a second person to help turn the table and base over. Screw the
table tops to the bases using woodscrews (D) through the following
holes. Screw the wheels to the bottom of each Leg.
D
A
/