Page is loading ...
KH9003 LOCKER
Isojoen Koehalli Oy, Keskustie 26, 61850 Kauhajoki As, Finland, Tel. +358 (0)20 1323 232, Fax +358 (0)20 1323 388, [email protected], www.ikh.fi
Part Description Illustration Qty
A Left side panel 1
B Right side panel 1
C Rear wall 1
D Frame & door 1
E Top 1
F Bottom 1
G Shelf 4
H Screw 13
I Shelf support 16
J Key 2
1. Take out the revolving pole &
plastic gasket and separate the
frame from the door.
3. Install the frame to
side panels A and B.
4. Install top E and bottom F into
the body and fix with screws H.
2. Join side panels A and B with rear
wall C, and fix with screws H.
5. Install shelf supports I into the
body as shown in the picture.
6. Install shelves G
into the body.
7. Install the door into the body and attach
the revolving pole & plastic gasket in place.
Revolving pole
& plastic gasket
Frame
Door
Frame
Revolving pole
& plastic gasket
/
