2. SKYDANCE
  3. T18-1
T18-1

SKYDANCE T18-1 User manual

  • I have reviewed the provided user manual for the T18-1 4 Channel 0-10V Touch Glass Panel Dimmer. This document details the features, installation, and operation of the dimmer, including its 4 channel output, touch panel interface, and wireless remote control compatibility. I am ready to answer your specific questions about this product.
  • What is the output signal of the dimmer?
    What is the operating temperature range?
    How many dimming levels are supported?
    What is the control range of the remote?
Output current 20mA/CH
Input voltage AC100-240V
User Manual Ver 1.1.3
Operation temperature
Case temperature (Max.)
Environment
IP20
IP rating
Dimming data
Dimming range
Touch key + RF 2.4GHz
10m(Barrier-free space)
256 levels
0 -100%
Technical Parameters
Input and Output
Warranty
5 years
Warranty
Input signal
RF Control distance
Dimming level
Ta: -30
O
C ~ +55
O
C
T c: +65
O
C
Model No.: T18-1
4 zone/Touch glass panel/Brightness slide/Wireless remote control
Features
Page 1
Mechanical Structures and Installations
4 Channel 0-10V Touch Glass Panel Dimmer
LVD
● Touch panel 0-10V dimmer, output 4 channel 0-10V signal.
● Output connect with 0/1-10V dimmable driver.
● Ultra sensitive high strength glass touch panel with touch slide in the middle.
RF 2.4G dimming remote control● Compatibility with .
● Touch keys with LED indicator.
● White & Black glass panel available.
T18-1 4 Channel 0-10V Touch Glass Panel Dimmer
Output signal 0-10V (20mA)
AC L input
AC N input
Zone Zone Zone Zone
Sce ne
Sce ne
Sce ne
Pow er
Short press turn on zone light and select zone simultaneously, long press 2s turn off zone light.
4 zone control seperately or synchronously, each zone could control multiple receivers.
Short press recall scene. Long press 2s to save the current state into 1/2/3.
Brightness slide.
Zon e
Zon e
Zon e
Zon e
Scene Scene Scene
Power Turn on/off all zone light.
GND
CH1 0-10V signal output
CH2 0-10V signal output
CH3 0-10V signal output
CH4 0-10V signal output
Note: The default output is 0-10V, if you want to 1-10V output, please touch power key to turn off light,
then long press power key for 15s , the output will become 1-10V.immediately
Touch power key to turn off light, then long press power key for 10s , the output will return 0-10V.immediately
Key function
LN
INPU T 100-240VAC
GND
0.5-2.0mm²
4-5mm
T18-1
RoH S
4
3
Temp Range: - 30℃~+55℃
Uin=100 -240VAC
Uout=4x (0-10V) S ignal
Iout=4x 20mA max.
OUT P UT 0- 10V SIGN A L
21
Typical base as below:
European style 86 size
Installation diagram:
Baseplate Base
Uninstall Touch panel
Safety and EMC
EMC standard (EMC) ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Radio Equipment(RED) ETSI EN 300 328 V2.2.2
Certification CE,EMC,LVD,RED
EN 62368-1:2020+A11:2020
Safety standard(LVD)
86.00 mm
86.00 mm
52.00 mm
52.00 mm
59.00 mm
33.00 mm
11.50 mm
User Manual Ver 1.1.3 Page 2
Wiring diagram
AC100-240V
Power input
V+
V-
DIM+
DIM-
ACN
ACL 0-10V Dimmable Driver
AC110-220V
V+
V-
DIM+
DIM-
ACN
ACL
V+
V-
DIM+
DIM-
ACN
ACL
V+
V-
DIM+
DIM-
ACN
ACL
0-10V Dimmable Driver
0-10V Dimmable Driver
0-10V Dimmable Driver
+
Single color LED strip
+
Single color LED strip
+
Single color LED strip
+
Single color LED strip
Match Remote Control (two match ways)
Use On/Off key
Match:
Turn on light, turn off, immediately press the On/Off
key of the panel for 5s,
then press any zone key of the RF remote within 5s.
The LED indicator fast flash 3 times
means match is successful.
Use Power Restart
Match:
Switch off the power, then switch on power, repeat again,
Immediately short press any zone key 3 times on the remote.
The light blinks 3 times means match is successful.
.
Delete:
Switch off the power, then switch on power, repeat again,
Immediately short press any zone key 5 times on the remote.
The light blinks 5 times means all matched remotes were
deleted.
Delete:
Turn on light, turn off, immediately press the On/Off
key of the panel for 10sto delete all match,
The LED indicator fast flash 6 times
means all matched remotes were deleted.
End user can choose the suitable match/delete ways. Two options are offered for selection:
T18-1 4 Channel 0-10V Touch Glass Panel Dimmer
The 0-10V touch panel dimmer can also match with the RF 4 zone dimming remote (optional).
Dimming curve
100
90
80
70
60
50
40
30
20
10
PWM duty(%)
50 60 70 80 90 100
Brightness(%)
10 20 30 40
10.0
9.0
8.0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0-10V level(V)
5V 6V 7V 8V 9V 10V2V 3V 4V
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
1V
outpu t curren t
Dimming input
Note:
When the output channel is off, the output dimming signal is 0V.
Please read the dimming section of the 0/1-10V dimming driver manual.
If the dimming characteristic curve is the same as below,
it will not be able to turn off the lights, you need select other models of 1-10V dimmer which have AC OUT function.
LN
INPUT 100-240VAC
GND
0.5-2.0mm²
4-5mm
T1 8-1
RoHS
4
3
Temp Rang e: -3 0℃~+ 55℃
Uin=1 00- 240VAC
Uout= 4x( 0-10V ) Sig nal
Iout= 4x2 0mA m ax.
OUTPUT 0-10V SIG NAL
21
Note: We recommend the number of LED drivers connected to 0/1-10V dimmer (each channel) does not exceed 20 pieces,
The maximum length of the wires from dimmer to LED driver should be no more than 30 meters.
/