Smooth Fitness 9.45TV User manual

USER’S MANUAL

9.45TV MOTORIZED TREADMILL

USER WEIGHT LIMITATION: 400lbs(182kgs).

SERIAL NUMBER (found on frame):

2 9.45TV TREADMILL

PRECAUTIONS

For future service or related questions:

Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your treadmill.

Name: ______________________________ Phone Number: ___________________ Receipt: ______________________

Precautions:

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and

information before operating the treadmill. It is the responsibility of the owner to ensure that all users of this treadmill are

adequately informed of all warnings and precautions.

• Use the treadmill only as described in this manual.

• Place on a level surface, with 6 feet (2 m) of clearance behind it. Do not place the treadmill on any surface that blocks air

openings. To protect the floor or carpet from damage, place a mat under the treadmill.

• When choosing a location for the treadmill be sure that the location and position permit access to a plug.

• Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered patio, or near

water.

• Do not operate the treadmill where aerosol products are used or where oxygen is being administered.

• Keep children under the age of 12 and pets away from the treadmill at all times.

• The treadmill should not be used by persons weighing more than 400LBS (182 Kgs).

• Never allow more than one person on the treadmill at a time. Wear appropriate exercise clothing when using the treadmill.

Do not wear loose clothing that could become caught in the treadmill. Athletic support clothes are recommended for both

men and women. Always wear athletic shoes. Never use the treadmill with bare feet, wearing only stockings, or in

sandals.

• When connecting the power cord, plug the power cord into a grounded circuit. No other appliance should be on the same

circuit.

• Always straddle the belt and allow it to start moving before stepping onto the belt.

• Always examine your treadmill before using to ensure all parts are in working order.

• Allow the belt to fully stop before dismounting.

• Never insert any object or body parts into any opening.

• Follow the safety information in regards to plugging in your treadmill.

• Keep the power cord away from the incline wheels and do not run the power cord underneath your treadmill. Do not

operate the treadmill with a damaged or frayed power cord.

• Always unplug the treadmill before cleaning and/or servicing. Service to your treadmill should only be performed by an

authorized service representative, unless authorized and/or instructed by the manufacturer. Failure to follow these

instructions will void the treadmill warranty.

• Never leave the treadmill unattended while it is running.

• Use “safety key” when operating the treadmill and make sure the “safety key” is clipped to the users clothing.

• Remove the “safety key” and store it in a safe place when the treadmill is not in use. Keep the “safety key” away from

children.

www.smoothfitness.com

3

POWER REQUIREMENTS

Power Requirements:

IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN THE RISK OF AN ELECTRIC

SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE

PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT

THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.

This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes, surges and

noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the possibility of

treadmill damage, always use a surge protector (not included) with your treadmill.

Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet surge protector with a

UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with a UL suppressed voltage rating of 400V or less and an

electrical rating 110VAC, 15 amps.

This treadmill must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance for electric

current, should the treadmill malfunction. This treadmill is equipped with an electrical cord that has an equipment-grounding

conductor and a grounding plug. Always plug the power cord into a surge protector, and plug the surge protector into an

appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like the plug illustrated in the drawing

below.

GFCI outlets and GFCI Circuit Breakers are NOT recommended for use on this product. GFCI outlets and GFCI Circuit Breakers

may cause this equipment to function improperly.

4 9.45TV TREADMILL

BEFORE YOU BEGIN

Open the boxes:

Open the boxes of your new equipment. Inventory all parts included in the boxes, and compare them to the Supplied

Components and Supplied Hardware lists on pages 5-6 for a full count of the parts included. If you are missing any

parts or have any questions contact us directly at 888-800-1167

*Assembly instructions are on pages 19-31.

Gather your tools:

Before you begin, make sure that you have gathered all the necessary tools you may require to assemble the unit

properly. Having all of the necessary equipment at hand will save time and make the assembly quick and hassle-free.

Clear your work area:

Make sure that you have cleared away a large enough space to properly assemble the unit. Make sure the space is

free from anything that may cause injury during assembly. After the unit is fully assembled, make sure there is a

comfortable amount of free area around the unit for unobstructed operation.

Invite a friend:

Some of the assembly steps may require heavy lifting. It is recommended that you obtain the assistance of another

person when assembling this product.

User Weight Limitation:

Please note that there is a weight limitation for this product. If you weigh more than 400LBS (Approx. 182 Kgs). It is

not recommended that you use this product. Serious injury may occur if the user’s weight exceeds the limit shown

here. This product is not intended to support users whose weight exceeds this limit.

Care and maintenance:

The safety level can be maintained only if it is examined for damage and wear.

Replace any defective components immediately and stop all use of the equipment until repaired.

Always take care when mounting the equipment. Straddle the equipment by placing your feet on the straddle rails.

Dismount from the equipment only after all parts have stopped.

Always check the wear and tear components like pulley, belts, etc.…To prevent injury.

There is an emergency stop, in the form of a SAFETY KEY, to prevent injury; you can stop the treadmill immediately

y actuating the emergency stop for emergency dismount.

b

www.smoothfitness.com

5

SUPPLIED COMPONENTS

This list identifies the major components you will use to assemble this product.

No. Description Qty.

A

Computer

1

B Front Handlebar Assembly 1

C Handlebar 2

D Upright Assembly Left 1

E Upright Assembly Right 1

F Main Frame Assembly 1

G Chest Belt 1

F Power Cord 1

I Running belt Lubrication 1

310 Adjustable Cylinder 2

303 Upright Cover - LL 1

304 Upright Cover - LR 1

305 Upright Cover - RL 1

306 Upright Cover - RR 1

311 Upright Plastic Shroud - LL 1

312 Upright Plastic Shroud - LR 1

313 Upright Plastic Shroud - RL 1

314 Upright Plastic Shroud - RR 1

315

Adjustable Cylinder Cover -

Upper

2

107 Safety Key 2

116 Water Bottle 1

A

B

311

312

107

116

313

314

315

310

D

C

305304

303

306

F

E

H

I

G

6 9.45TV TREADMILL

SUPPLIED HARDWARE

This list identifies the hardware you will use to assemble the product. To help distinguish between

the various types of screws and bolts, use the scale below to measure them and compare them to

he sizes listed. t

No. Description Qty.

804

M8 × 15mm Bolt

2

805 M8 × 50mm Bolt 12

806 # 8 × 20mm Screw 18

807

4 × 15mm Thread Cutting

Screw

19

826 M8 Nylon Nut 2

843 M8 × 15 mm Allen Head Bolt 4

845 13 × 42mm Shaft 2

846 #8 × 23mm Washer 2

A 5mm Allen Key 1

B 8mm Allen Key 1

C Screwdriver 1

D 5mm Allen Wrench 1

E Spanner 1

F 6mm Allen Wrench

1

845

846

826

B

CEA

D

F

807

843

805

806

804

MILLIMETERS

www.smoothfitness.com

7

SUPPLIED COMPONENTS

These instructions are for the TV attachment. Prior to assembling the TV attachment, lease follow

the product assembly instructions to complete the treadmill assembly.

TV attachment parts list :

No. Description Qty.

1 TV screen 1

2 TV screen suspension pad 1

3 M6 × 10 Bolt 4

4 TV bracket 1

5 M5 × 10 Bolt 4

6 M3 × 10 Bolt 10

7 M6 × 10 Allen head bolt 2

8 Pivot side cover 2

9 Pivot bushing 2

10 M8 × 45 Allen head bolt 1

11 Pivot top cover 1

12 Spacer 1

13 Pivot shaft 1

14 Pivot bottom cover 1

15 TV bracket support tube 1

16 Support tube cover 2

18 Cable wire 1

19 TFT TV 8Pin wire 1

20 Extra Speaker 2

21 Support bracket 2

805 M8 × 50mm Bolt 4

18

19

10

12

2

3

4

1

8

7

5

805

9

15

3

8

7

11

13

20

6

14

805

21

8 9.45TV TREADMILL

COMPLETE PARTS LIST

Item No. Description Qty. Part No.

9.45TV-100

Complete Computer Console

101

Overlay

1 9.45TV-101

102

Computer Insert

1 9.45TV-102

103

Console PC Board

1 9.45TV-103

104

Console Housing – Upper

1 9.45TV-104

105

Console Housing – Bottom

1 9.45TV-105

106

Safety Key Base

1 9.45TV-106

107

Safety Key

1 9.45TV-107

108

Safety Key Wire – Upper

1 9.45TV-108

109

Computer Wire – Upper

1 9.45TV-109

110

Computer Ground Wire

1 9.45TV-110

111

Hand Pulse Wire – Upper

2 9.45TV-111

112

E – Prom

1 9.45TV-112

113

Motion Control Board

1 9.45TV-113

114

Motion Control Board Wire

1 9.45TV-114

115

Motion Control Sensor Wire

2 9.45TV-115

116

Water Bottle Holder

2 9.45TV-116

9.45TV-200

Complete Handle Bar Components

201

Handle Bar Upright

2 9.45TV-201

202

Handle Bar Upright Foam Grip

2 9.45TV-202

203

Front Handle Bar

1 9.45TV-203

204

Front Handle Bar Foam Grip-Short

1 9.45TV-204

205

Front Handle Bar Foam Grip-Long

2 9.45TV-205

206

Hand Pulse Set

2 9.45TV-206

207

Motion Control

2 9.45TV-207

208

Motion Control Base

2 9.45TV-208

9.45TV-300

Complete Upright Components

301

Upright

2 9.45TV-301

303

Upright Cover-LL

1 9.45TV-303

304

Upright Cover-LR

1 9.45TV-304

305

Upright Cover-RL

1 9.45TV-305

306

Upright Cover-RR

1 9.45TV-306

307

Safety Key Wire – Middle

1 9.45TV-307

308

Computer Wire – Upper

1 9.45TV-308

Motion Control Sensor Wire - Middle

2 309 9.45TV-309

www.smoothfitness.com

9

COMPLETE PARTS LIST

Item No. Description Qty. Part No.

310

Adjustable Cylinder

2 9.45TV-310

311

Upright Plastic Shroud – LL

1 9.45TV-311

312

Upright Plastic Shroud – LR

1 9.45TV-312

313

Upright Plastic Shroud – RL

1 9.45TV-313

314

Upright Plastic Shroud – RR

1 9.45TV-314

315

Adjustable Cylinder Cover - Upper

2 9.45TV-315

318

Fixing Inserts

2 9.45TV-318

9.45TV-400

Complete Base Frame Components

401

Base Frame

1 9.45TV-401

402

Safety Key Wire – Lower

1 9.45TV-402

403

Computer Wire –Lower

1 9.45TV-403

404

Power Switch Plate Cover

1 9.45TV-404

405

Power Switch Plate

1 9.45TV-405

406

Power Breaker

1 9.45TV-406

407

Power Switch

1 9.45TV-407

411

Bushing

4 9.45TV-411

412

Fix Bolt Sets

2 9.45TV-412

413

Front Caster

2 9.45TV-413

414

Rubber Cushion

2 9.45TV-414

415

Level Adjuster

2 9.45TV-415

416

Base Frame End Cap

2 9.45TV-416

417

Cushion

2 9.45TV-417

425

I/O Console

1 9.45TV-425

426

Shock

1 9.45TV-426

9.45TV-500

Complete Motor Components

501

Motor Hood

1 9.45TV-501

502

Elevation Motor

1 9.45TV-502

503

Elevation Gear Sleeve

1 9.45TV-503

504

Driving Motor

1 9.45TV-504

505

Motor Holder

1 9.45TV-505

506

Driving Belt

1 9.45TV-506

507

Motor Control Board

1 9.45TV-507

508

Elevation Control Board

1 9.45TV-508

10 9.45TV TREADMILL

COMPLETE PARTS LIST

Item No. Description Qty. Part No.

509

Elevation Support Tube

1 9.45TV-509

510

Elevation Support Tube Cover - LEFT

1 9.45TV-510

511

Motor Bottom Cover

1 9.45TV-511

512

Deck Frame Side Cover - LEFT

1 9.45TV-512

513

Plastic Clamp - TOP

2 9.45TV-513

514

Plastic Clamp - BOTTOM

2 9.45TV-514

515

Elevation Support

2 9.45TV-515

516

Deck Rubber Cushion

2 9.45TV-516

517

Rear Vent Cover

1 9.45TV-517

518

Elevation Support Tube Cover - RIGHT

1 9.45TV-518

519

Deck Frame Side Cover – RIGHT

1 9.45TV-519

9.45TV-600

Complete Running Deck Components

601

Running Belt

1 9.45TV-601

602

Side Rail

2 9.45TV-602

603

Running Deck

1 9.45TV-603

604

Side Rail End Cap - LEFT

1 9.45TV-604

605

Side Rail End Cap - RIGHT

1 9.45TV-605

9.45TV-700

Complete Deck Frame Components

701

Deck Frame

1 9.45TV-701

702

Front Roller Shaft

1 9.45TV-702

703

Front Roller Tube

1 9.45TV-703

704 Roller Bearing 6202

4 9.45TV-704

705 Rear Roller Shaft

1 9.45TV-705

706 Rear Roller Tube

1 9.45TV-706

707 Running Deck Support Tube

1 9.45TV-707

708 Deck Frame – Rear

1 9.45TV-708

709 Steady Frame

1 9.45TV-709

413 Rear Caster

2 9.45TV-413

9.45TV-800

Complete Hardware Pack

801

＃6 × 12mm Screws

10 9.45TV-801

802 M4 × 6mm Screws

12 9.45TV-802

803 M8 × 12mm Screws

8 9.45TV-803

www.smoothfitness.com

11

COMPLETE PARTS LIST

Item No. Description Qty. Part No.

804 M8 × 15mm Bolt

3 9.45TV-804

805 M8 × 50mm Bolt

16 9.45TV-805

806 # 8 × 20mm Screw

20 9.45TV-806

807 4 × 15mm Thread Cutting Screw

19 9.45TV-807

808 M5 × 10mm Screws

4 9.45TV-808

809 M8 × 16 Screws

20 9.45TV-809

813 Washer

4 9.45TV-813

814 Nylon Nut

6 9.45TV-814

816 M14 × 90 Screws

3 9.45TV-816

817 Bearing

4 9.45TV-817

818 M10 × 35mm Screws

10 9.45TV-818

819 M8 × 10mm Screws

7 9.45TV-819

820 M8 × 50mm Screws

2 9.45TV-820

821 M10 × 63mm Bolts

1 9.45TV-821

822 Fixed Block

8 9.45TV-822

823 M8 × 120mm Bolts

1 9.45TV-823

824 Plate Washer

2 9.45TV-824

825 Spring

1 9.45TV-825

826 M8 Nylon Nut

2 9.45TV-826

827

M8 × 20mm Screws

6 9.45TV-827

828

Spring Washer

12 9.45TV-828

829

Washer

2 9.45TV-829

830

M10 × 136mm Screws

1 9.45TV-830

832

M8 × 25mm Screws

8 9.45TV-832

833

Hexagon Nut

10 9.45TV-833

834

M6 × 70mm Bolts

3 9.45TV-834

838

M10 × 43mm Bolts

2 9.45TV-838

839

Cushion Pad

10 9.45TV-839

840

M10 × 40mm Screws

1 9.45TV-840

841

M6 × 10mm Screws

2 9.45TV-841

842

M10 × 30mm Allen Head Bolt

2 9.45TV-842

843

M8 × 15mm Allen Head Bolt

4 9.45TV-843

845

13 × 42mm Shaft

2 9.45TV-845

846

#8 × 23mm Washer

2 9.45TV-846

847

M5 x 12mm Flat Head Bolt

2 9.45TV-847

12 9.45TV TREADMILL

PARTS DIAGRAM

MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED

www.smoothfitness.com

13

PARTS DIAGRAM

MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED.

14 9.45TV TREADMILL

PARTS DIAGRAM

A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.

www.smoothfitness.com

15

PARTS DIAGRAM

MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED.

16 9.45TV TREADMILL

PARTS DIAGRAM

MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED.

809

511

806

809

512

510

819

513

514

515

827

513

518

828

827

825

827

507

508

821

830

506

509

516

829

504

505

824

503

820

814

824

816

814

819

517

820

502

823

519

809

514

515

501

819

514

513

819

510

512

809

827

825

827

828

518

513

827

515

809

806

511

516

506

830

821

508

507

814

820

503

824

505

504

829

823

502

820

517

819

501

515

514

809

519

819

814

816

824

5

0

9

8

1

4

8

4

2

www.smoothfitness.com

17

PARTS DIAGRAM

MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED.

822

603

602

809

604

605

832

601

818

18 9.45TV TREADMILL

PARTS DIAGRAM

MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED.

709

833

828

833

702

703

840

814

704

701

834

413

706

834

814

838

839

828

833

828

833

828

833

828

833

704

705

708

841

707

www.smoothfitness.com

19

ASSEMBLY

STEP 1: Unpacking and Inventory

(A)Remove your treadmill from the carton and place it on the floor in an open area.

(B)Remove the treadmill and all the components and hardware from the box.

(C)Check the quantities of all components and hardware with the component and hardware lists on pages 5-6

(D) After verifying inventory if there are any missing parts please contact Smooth fitness at 1-888-800-1167.

310

311

312

313

314

315

B

F

E

D

C

A

305304

303

306

20 9.45TV TREADMILL

ASSEMBLY

STEP 2:Assemble Upright Frame

NOTE: Make sure all wires are recessed into the frame. DO NOT trap or

pinch DO NOT tighten bolts until STEP13

(A) Connect the Lower and middle section wire as seen below (307 to 402)(308 to 403)

(B) Insert any extra cable length into the Left Upright (301).

(C)Insert the Left and Right Uprights (301) into the Base Frame (401).

403

402

307

308

Page is loading ...

Smooth Fitness 9.45TV User manual

Smooth Fitness 9.45TV User manual

Related papers

Other documents