LT-52153

Mitsubishi Electric LT-52153 User manual

  • Hello! I am an AI chatbot trained to assist you with the Mitsubishi Electric LT-52153 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Guidelines for setting up and using your new widescreen TV start on • page 7.
Forquestions:•
Visitourwebsiteatwww.mitsubishi-tv.com.-
E-mailusatMDEAservice@mdea.com.-
CallConsumerRelationsat- 800-332-2119.
Forinformationon• System Reset,pleaseseethebackcover.
Toorderreplacementoradditionalremotecontrols,visitourwebsiteatwww.mitsuparts.comorcall•
800-553-7278.
153 Series.• IRemittercablesforNetCommandhome-theatercontrolareavailableforpurchase
fromMitsubishi.
Call800-553-7278and
requesteitherpartnumber242D483020(two-endedcable)
orpartnumber299P254020(four-endedcable).
IMMERSIVESOUNDLCDHDTV
withIntegratedSoundProjector
MODELS
151 Series
LT-40151, LT-46151, LT-52151
153 Series
LT-40153, LT-46153, LT-52153
OWNERSGUIDE
FCC Declaration of Conformity
Product: LCDFlatPanelHDTV
Models: LT-40151,LT-46151,LT52151
LT-40153,LT-40153,LT-52153
Responsible
Party:
MitsubishiDigitalElectronics
America,Inc.
9351JeronimoRoad
Irvine,CA92618-1904
Telephone: (800)332-2119
ThisdevicecomplieswithPart15oftheFCCRules.
Operationissubjecttothefollowingtwoconditions:
(1)
Thisdevicemaynotcauseharmfulinterference,
and
(2) Thisdevicemustacceptanyinterference
received,includinginterferencethatmaycause
undesiredoperation.
Note: Thisequipmenthasbeentestedandfound
tocomplywiththelimitsforaClassBdigitaldevice,
pursuanttopart15oftheFCCRules.Theselimits
aredesignedtoprovidereasonableprotection
againstharmfulinterferenceinaresidentialinstal-
lation.Thisequipmentgenerates,usesandcan
radiateradiofrequencyenergyand,ifnotinstalled
andusedinaccordancewiththeinstructions,may
causeharmfulinterferencetoradiocommunica-
tions.However,thereisnoguaranteethatinterfer-
encewillnotoccurinaparticularinstallation.Ifthis
equipmentdoescauseharmfulinterferencetoradio
ortelevisionreception,whichcanbedetermined
byturningtheequipmentoffandon,theuseris
encouragedtotrytocorrecttheinterferencebyone
ormoreofthefollowingmeasures:
Reorientorrelocatethereceivingantenna.-
Increasetheseparationbetweentheequip--
mentandthereceiver.
Connecttheequipmentintoanoutleton-
acircuitdifferentfromthattowhichthe
receiverisconnected.
Consultthedealeroranexperiencedradio/-
TVtechnicianforhelp.
Changes or modifications not expressly
approved by Mitsubishi could cause harmful
interference and would void the user’s authority
to operate this equipment.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TOREDUCETHERISKOFELECTRIC
SHOCK,DONOTREMOVECOVER(ORBACK).
NOUSERSERVICEABLEPARTSINSIDE.REFER
SERVICINGTOQUALIFIEDSERVICEPERSONNEL.
TV WEIGHT:ThisTVisheavy.Exerciseextremecare
whenliftingormovingit.LiftormovetheTVwitha
minimumoftwoadults.TopreventdamagetotheTV,
avoidjarringormovingitwhileitisturnedon.Always
poweroffyourTV,unplugthepowercord,anddiscon-
nectallcablesbeforemovingit.
WARNING:Toreducetheriskoffireorelectricshock,
donotexposethisapparatustorainormoisture.
WARNING:Thisproductcontainschemicalsknown
totheStateofCaliforniatocausecancerand/orbirth
defectsorotherreproductiveharm.
WARNING:Thisproductshallbeconnectedtoa
MAINSsocketoutletwithaprotectiveearthingconnec-
tion.
MAINS DISCONNECTION:Themainsplugisused
asthedisconnectdevice.Themainsplugshallremain
readilyoperable.
Featuresandspecificationsdescribedinthisowner’s
guidearesubjecttochangewithoutnotice.
Thelightningflashwitharrowheadsymbol
withinanequilateraltriangleisintendedto
alerttheuserofthepresenceofuninsulated
“dangerousvoltage”withintheproduct’s
enclosurethatmaybeofsufficientmagnitudetoconsti-
tuteariskofelectricshocktopersons.
Theexclamationpointwithinanequilat-
eraltriangleisintendedtoalerttheuserto
thepresenceofimportantoperatingand
maintenance(servicing)instructionsinthe
literatureaccompanyingtheproduct.
For Your Records
Recordthemodelnumber,serialnumber,and
purchasedateofyourTV.Themodelandserial
numbersareonthebackoftheTV.Refertothis
pagewhenrequestingassistancewiththeTV.
MODEL NUMBER
SERIAL NUMBER
PURCHASE DATE
RETAILER NAME
LOCATION
Contents
ImportantSafetyInstructions................ 4
ImportantInformationAboutYourTV.......... 5
SpecialFeaturesofYourTV................. 6
1 Basic Setup and Operation
PackageContents....................... 7
StandInstallation........................ 8
Wall-Mounting.......................... 8
BeforeYouBegin........................ 9
First-TimePower-On...................... 9
TVControls........................... 10
SettingUpTVInputs..................... 12
BasicTVOperation...................... 14
2 TV Connections
BeforeYouBegin....................... 16
CableManagement..................... 16
InputsandOutputs...................... 17
YPbPrComponentVideoDevice........... 19
H
DMIDevice.............................19
DVIVideoDevice....................... 20
CompositeVideoDevice.................. 20
AntennaorCableTVService............... 20
VCRorDVDRecordertoanAntennaor
WallOutletCable...................... 21
VCRorDVDRecordertoaCableBox........ 21
A/VReceiver.......................... 22
A/VReceiverwithHDMIOutput............. 22
Subwoofer............................ 23
Audio-OnlyDevice...................... 23
3 Using TV Features
SelectinganInput...................... 24
SleepTimer........................... 24
ChannelViewChannelListings.............. 25
RedirectingAudioOutput................. 25
ControllingA/VReceiverVolume............ 25
StatusDisplay......................... 26
TVSignalsandDisplayFormats............. 27
UsingtheTVwithaPersonalComputer....... 28
CameraImagesandMusicFiles............ 30
SoundProjector........................ 33
IntroductiontoHome-TheaterControl........ 36
4 TV Menus
MainMenu............................ 37
MenuNavigation....................... 37
Adjust............................... 38
Captions............................. 43
Initial................................ 44
Inputs............................... 47
Lock................................ 49
5 NetCommand IR Control
AboutNetCommandIRControl............. 52
IREmitterPlacement.................... 53
InitialNetCommandSetup................ 54
OperatingNetCommand-ControlledDevices... 55
6 NetCommand IR Control of an A/V Receiver
ControllinganA/VReceiverafterNetCommand
Setup.............................. 58
SettingUpA/VReceiverControl
PowerandVolume................... 59
AutomaticSwitching(AudioorAudio/Video). 60
Appendices
AppendixA:BypassingtheParentalLock..... 65
AppendixB:ProgrammingtheRemoteControl. 67
AppendixC:HDMIControlofCECDevices.... 74
AppendixD:TVCare.................... 77
AppendixE:Troubleshooting.............. 78
Trademark and License Information.......... 85
Warranty.............................. 89
Index................................. 91
4
Important Safety Instructions
PleasereadthefollowingsafeguardsforyourTVand
retainforfuturereference.Alwaysfollowallwarnings
andinstructionsmarkedonthetelevision.
1) Readtheseinstructions.
2) Keeptheseinstructions.
3) Heedallwarnings.
4) Followallinstructions.
5) Donotusethisapparatusnearwater.
6) Cleanonlywithdrycloth.
7) Donotblockanyventilationopenings.Installin
accordancewiththemanufacturer’sinstructions.
8) Donotinstallnearanyheatsourcessuchas
radiators,heatregisters,stoves,orotherapparatus
(includingamplifiers)thatproduceheat.
9) Donotdefeatthesafetypurposeofthepolarized
orgrounding-typeplug.Apolarizedplughastwo
bladeswithonewiderthantheother.Agrounding
typeplughastwobladesandathirdgrounding
prong.Thewidebladeorthethirdprongare
providedforyoursafety.Iftheprovidedplugdoes
notfitintoyouroutlet,consultanelectricianfor
replacementoftheobsoleteoutlet.
10) Protectthepowercordfrombeingwalkedon
orpinchedparticularlyatplugs,convenience
receptacles,andthepointwheretheyexitfromthe
apparatus.
11) Onlyuseattachments/accessoriesspecifiedbythe
manufacturer.
12) Useonlywiththecart,
stand,tripod,bracket,
ortablespecified
bythemanufacturer,
orsoldwiththe
apparatus.When
acartisused,use
cautionwhenmoving
thecart/apparatus
combinationtoavoid
injuryfromtip-over.
13) Unplugthisapparatus
duringlightningstormsorwhenunusedforlong
periodsoftime.
14) Referallservicingtoqualifiedservicepersonnel.
Servicingisrequiredwhentheapparatushasbeen
damagedinanyway,suchaspower-supplycordor
plugisdamaged,liquidhasbeenspilledorobjects
havefallenintotheapparatus,theapparatushas
beenexposedtorainormoisture,doesnotoperate
normally,orhasbeendropped.
ANT E NNA
LE AD IN W IR E
ANT E NNA
DIS C HAR G E UNIT
(NE C AR T IC LE 810-20)
G R OU NDING
C ONDUC T O R S
(NE C AR T IC L E 810-21)
G R OUND C L AMP S
P OW E R S E R VIC E G R OUNDING
E LE C T R ODE S Y S T E M
(NE C AR T 250, P AR T H)
G R OUND C L AMP
E LE C T R IC
S E R V IC E
E QUIP ME NT
NE C NAT IONAL E LE C T R IC AL C O DE
E XAMP LE OF ANT E NNA G R OUNDING
Outdoor Antenna Grounding
Ifanoutsideantennaorcablesystemisconnected
totheTV,besuretheantennaorcablesystemis
groundedsoastoprovidesomeprotectionagainst
voltagesurgesandbuilt-upstaticcharges.
Replacement Parts
Whenreplacementpartsarerequired,besurethe
servicetechnicianhasusedreplacementpartsspeci-
fiedbythemanufacturerorhavethesamecharacter-
isticsastheoriginalpart.Unauthorizedsubstitutions
mayresultinfire,electricshockorotherhazards.
5
Important Information About Your TV
Installation Notes
Forstandinstallationandwall-mounting,seepage8.
Use with other than the authorized accessories
may cause the TV to become unstable, which can
cause damage to the product or possible injury.
Custom cabinet installation must allow for proper
air circulation around the television.
NOTE TO CATV SYSTEM INSTALLER: THISREMINDER
ISPROVIDEDTOCALLTHECATVSYSTEMINSTALLER’S
ATTENTIONTOARTICLE820-40OFTHENECTHATPRO-
VIDESGUIDELINESFORTHEPROPERGROUNDINGAND,
INPARTICULAR,SPECIFIESTHATTHECABLEGROUND
SHALLBECONNECTEDTOTHEGROUNDINGSYSTEMOF
THEBUILDING,ASCLOSETOTHEPOINTOFCABLEENTRY
ASPRACTICAL.
TV Software
DonotattempttoupdatethesoftwareofthisTVwith
softwareorUSBdrivesnotprovidedbyorauthorizedby
MitsubishiDigitalElectronicsAmerica,Inc.Non-authorized
softwaremaydamagetheTVandwillnotbecoveredby
thewarranty.
If Your TV Gets Damaged
CrystallineliquidmayleakfromtheLCDpaneland
brokenglassmaybescattered.
CAUTION: The crystalline liquid is toxic. Avoid
contact with your skin, eyes, or mouth.DONOT
touchthebrokenglassorcrystallineliquid.DONOTget
glassfragmentsorcrystallineliquidintoeyesormouth.
Should either contact with your eyes or mouth,
rinse the contacted area thoroughly with water and
consult your doctor.
Disposal of Your TV
TheLCDpanelcontainsasmallamountofcrystalline
liquidandthefluorescenttubeinthepanelcontains
mercury.Botharetoxicandshouldnotbetouched.
DO NOT dispose of the TV with general household
waste.THELAMPSINSIDETHISPRODUCTCONTAIN
MERCURYANDMUSTBERECYCLEDORDISPOSED
OFACCORDINGTOLOCAL,STATE,ANDFEDERAL
LAWS.Fordisposalorrecyclinginformation,contact
yourlocalauthoritiesortheElectronicIndustriesAlli-
anceatwww.eiae.org.
6
Special Features of Your TV
Yournewhigh-definitionwidescreentelevisionhas
manyspecialfeaturesthatmakeittheperfectcenterof
yourhomeentertainmentsystem,including:
1080p High-Definition LCD Display System
YourMitsubishiLCDFlatPanelHDTVusesafull1920
x1080LCDpaneltocreatethepictureyouseeonthe
screen.Allimagesaredisplayedat1080p.TheTV
usesnewPlush1080p
®
5Gdigitalvideoprocessingto
convertlower-resolutionsignalsto1080pfordisplay.
Smooth120Hz™ Film Motion
Smooth120Hz™FilmMotionmakesfast-movingimages
appearsmootherandmorefluid,freefrommotionblur.
Itdoesthisbydoublingthetraditionalprogressivescan
framerateandcreatesnewframesofvideobetween
thetraditionalframestocreatesmoothermoving
images.Smooth120Hz™FilmMotionalsosmoothsfilm
judder(imagevibration)thatmaybepresentinfilm-
basedcontentsuchasmovies.
16:9 Widescreen Picture Format
Enjoyafulltheatricalexperienceinthecomfortofyour
home.Viewpicturesasfilmdirectorsintendedthem.
DigitalTVbroadcasts,DVDsandnewervideogame
consolessupportthiswidescreenformat.
Integrated HDTV Tuner
YourwidescreenMitsubishiHDTVhasaninternalHDTV
tunerabletoreceivebothover-the-airHDTVbroad-
casts(receivedviaanantenna)andnon-scrambled
digitalcablebroadcasts,includingnon-scrambled
HDTVcableprogramming.
High-Definition Video Inputs
Component Video Inputs.• AlsocalledY/Pb/Pr
inputs,theseinputsreceivestandardanalogvideo
formatsof480i,480p,720p,and1080ihigh-defini-
tionsignals.Thisprovidesahighlevelofflexibility
whenconnectingDVDplayers/recorders,cable
boxes,andsatellitereceivers.
HDMI Inputs.• Theseinputsacceptdigital480i,
480p,720p,1080i,and1080pvideosignalsplus
bitstreamandPCMdigitalstereosignals.The
HDMI™inputscanalsoacceptavarietyofPC
signalsandresolutions.Theseinputssupport
HDMI1.3DeepColor(upto36bits)andthe
x.v.Color extendedcolorgamut.
Usedwithanadapter,theseinputsalsoaccept
compatibledigitalDVIvideosignals.HDMI
inputsprovideadditionalhigh-performance,
high-definitionconnectionsformaximumflexibility
inyourchoiceofhometheaterproducts.TheHDMI
inputsareHDCPcopy-protectioncompatible.
Easy Connect Auto Input Sensing
EasyConnect™AutoInputSensingautomaticallyrec-
ognizeswhenyoupluginadeviceandpromptsyouto
assignanametoit.TheTVignoresanyunusedinputs,
sotheresultisanunclutteredmenuwhereyoucan
easilyfindandselectconnecteddevicesbyname.
Home-Theater Control
HDMI Control
Available for all models.HDMIdeviceswithCon-
sumerElectronicsControl(CEC)capabilitiesmaybe
compatiblewiththeTVsHDMIControlfeature.Com-
patibledevicescanreceivecontrolsignalsthroughthe
HDMIconnection,allowingtheTVsremotecontrolto
operatesomefunctionsofthesedevices.
NetCommand with IR Learning
153 Series.YourMitsubishiHDTVoffersanewlevel
ofnetworkingthatseamlesslyintegratesselected
olderA/Vproductswithnewandfuturedigitalprod-
ucts.NetCommand
®
supportsIR(infrared)controlof
productssuchasVCRs,DVDplayers,cableboxes,and
satellitereceivers.NetCommandcan“learn”remote
controlsignalsdirectlyfrommanydevices,allowingyou
tocreateacustomizedNetCommand-controlledhome-
theatersystem.
Sound Projector
SoundProjectortechnologyusestheTVsbankof
speakerstocreateasimulatedsurroundsoundeffect
byreflectingsoundofftheroomwalls.SoundProjec-
torletsyoucustomizetheeffecttomatchyourroom
dimensionsandlayout.
ENERGY STAR
®
Compliance
ThisTVmeetsENERGYSTAR
®
efficiencystandards
underallbutthefollowingconditions:
TV Condition TV Power Status
PictureModesetto
Brilliant
Whilepoweredon,the
TV’spowerconsumption
exceedsENERGYSTAR
standards.
Fast Power On
enabled
Whilepoweredoff,afew
componentsdrawpower
atalevelthatexceeds
ENERGYSTARstandards
forapowered-offdevice.
153 Series.External
ControllerInputenabled
7
Basic Setup and Operation
1
Package Contents
Pleasetakeamomenttoreviewthefollowinglistof
accessoryitemstoensurethatyouhavereceived
everything.
Remote Control Batteries
Removetheremotecontrolbackcover.1.
Emitter
Bulb
Loadthebatteries,makingsurethepolarities2.
(+)and(-)arecorrect.Insertthenegative(-)
endfirst.
Slidethecoverbackintoplace.3.
Remote Control1.
GUIDE MENU INFO BACK
ACTIVITY
Two AA Batteries2.
AA
AA
Basic Owner’s 3.
Guide
HDTV Quick Setup 4.
Guide
Product Registra-5.
tion Card
Power Cord6.
Cable Tie7.
Stand Screws8.
153 Series. Calibra-9.
tion Microphone
8 1. Basic Setup and Operation
1
3
2
Back
Extension pieces
on back of stand
Wall-Mounting
Stand Installation
1
3
2
Back
Extension pieces
on back of stand
Ifplanningtowall-mounttheTV,donotinstallthe
stand.Toorderawall-mountkit,pleasecontact
PeerlessIndustries,Inc.at(800)473-3753orvisit
www.peerlessmounts.com.Orderwall-mountkitmodel
ST650.
CAUTION: Using this TV with other than the authorized accessories may cause the TV to become unstable,
which can cause damage to the product or possible injury.
Toorderawall-mountkitfromMitsubishiDigitalElec-
tronicsAmerica,Inc.,pleasevisitwww.mitsuparts.com
orcall(800)553-7278.
Completeinstallationinstructionsareincludedwiththekit.
Required:PhillipsScrewdriver
CAUTION
At least TWO PEOPLE are required to install
the stand. Support the TV near the corners as
shown. Failure to follow these recommenda-
tions may result in personal injury and damage
to the product.
1. Basic Setup and Operation 9
Before You Begin
Reviewtheimportantsafety,installation,andoper-
1.
atinginformationatthebeginningofthisbook.
ChoosealocationforyourTV.
2.
• See the stand-installation or wall-mounting
requirements on the opposite page.
• Allowatleastfourinchesofspaceonallsides
oftheTVtohelppreventoverheating.Over-
heatingmaycauseprematurefailureoftheTV.
• Avoidlocationswherelightmayreflectoffthe
screen.
Installthebatteriesintheremotecontrol.
3.
PlugtheTVintoanACpoweroutlet.
4.
TV power connection
Welcome Screen Energy Options
Mitsubishirecommendsthe• Homesetting,which
meetsENERGYSTAR
®
efficiencystandards.
Home Fast Power On• allowstheTVtopowerup
quickly.WiththissettingthesmallcurrenttheTV
drawswhilepoweredoffexceedsENERGYSTAR
standardsforapowered-downdevice.
The• Retailsettinglooksbestunderbrightlight-
ing.ThismodeincreasestheTV’spowercon-
sumptionbeyondENERGYSTARstandards.
ThistablecomparesWelcomescreenenergymodes.
Home
Home Fast
Power On
Retail
Picture Mode Bright Bright Brilliant
Backlight
Level
Reduced
Brightness
Reduced
Brightness
Full
Brightness
Time to
Power On
Normal Fast Normal
First-Time Power-On
Confirmthattheremote
1.
controlisin
TV
mode.
Pressthesidebutton•
oncetolightthemode
indicatorandconfirm
that
TV
modeisactive.
Tochange,pressthe•
sidebuttonadditional
timestoactivate
TV
mode.
GUIDE MENU INFO BACK
TV
Aimtheremotecontrol
2.
attheTVandpressthe
POWER
key
.
Waitforthe
Welcomescreen.
GUIDE MENU INFO BACK
Press
3.
ifyouwishto
changethemenulanguage
toEspañol.
Press
4.
tomovetothe
energy-modeselections.
Seetheinformationboxfor
details.
Press
5.
tohighlightEXIT.
Press
ENTER
toclearthe
menu.
10 1. Basic Setup and Operation
Remote Control
PowersTVonoroff.
Sidebuttonsetsthecontrolmode
forthetypeofdevicetooperate.Set
modeto
TV
fornormalTVviewing.
Number/letterkeys
Channeltuning,page14
MORE
Displaysamenushowingaddi-
tionalfunctionsforthenumber
keys.
Forthe•
MORE
menuinTVmode,
seebelow.
Withremotecontrolprogrammed•
forotherdevicetypes,page67.
The
MORE
menuinothermodesis
specifictothedevicetype.
ForCEC-enableddevices,• page74
CHANNEL UP
VOLUME UP
Record/Playbackcontrolsforexternaldevices
Whenremotecontrolisprogrammed,page67
HDMIcontrol,page76
153 Series:NetCommand,page55
VCR

CABL /SAT

TV

DVD

AUDIO
Control-modeindicatorfordevice
typetocontrol.Usethesidebuttonto
change.
MUTE
VOLUME DOWN
LAST
.

Returnstothepreviouslytuned
channel.
CHANNEL DOWN
TV Controls
Note: Tooperateotheraudio/video
devicesusingtheTV’sremote
control:
• SeeAppendixB,“ProgrammingtheRemote
Control.”
• ForHDMIdevicescompatiblewiththeTVs
HDMIControlfeature,seeAppendixC.
• 153 Series
See- page52forNetCommandIR“Learn-
ing”ofdevicekeys.
ForuseofspecifickeyswithNetCom--
mand-controlleddevices,see“Special
OperationMethods,”page55.
The MORE menu in TV mode
GUIDE
ChannelViewlistings,page25
.
MENU
TVmainmenu,page37
INFO
TVstatus(
page26)
orTVhelp.
BACK
Stepsbackonemenu;clears
thetopmenuorStatusDisplay.
(
PAUSE
)
FreezesabroadcastTVpicture.
CANCEL
Addsaseparatorwhenenter-
ingdigitalchannelnumbers.
Clearssomemenuentries.
ACTIVITY
PresstoselectaTVactivity
andinput.Seepage24.
PAGE UP
ENTER
Selectsachannelnumberor
menuitem.

Navigationcontrols
PAGE DOWN
SLEEP
SleepTimer,page24
FORMAT
Pictureshape(aspectratio),page27
MORE
Clears
theMOREmenu.
CC
ClosedCaptions,page43
VIDEO
Videoadjustments,
page38
AUDIO
Audioadjustments,
page39
1. Basic Setup and Operation 11
TV Control Panel
Buttonsonthecontrolpanelduplicatesomekeyson
theremotecontrol.
ACTIVITY
• ,
CH
,and
VOL
areavailablewhennoTV
menusaredisplayed.
•  and
ENTER
areavailablewhenusingTV
menusorafteractivatingaspecialfunction.
System Reset
IftheTVfailstorespondtotheremotecontrol,the
control-panelbuttons,orwillnotpoweron/off,perform
SystemReset.Recentsettingchangesmadebefore
usingSystemResetmaybelost.
ToperformSystemReset,pressandholdthe
POWER
buttononthecontrolpanelfortenseconds.
Panel-Lock Release
To• releasethePanelLockusingtheTVcontrol
panel,pressandholdthe
ACTIVITY
buttononthe
controlpanelfortenseconds.IftheTVisoff,press
the
POWER
buttontohaveitpoweron.
ToactivatethePanelLock,usethe• Lockmenu,
page51.
TV Controls, continued
Key
Off
SteadyOn
SlowBlinking
LED Color TV Condition Additional Information
None
TVispoweredoff.
Normaloperation.
Green
TVispoweredon.
Normaloperation.
Green
TVpoweredoff,auto-onTVTimer
isset.
Normaloperation.TVcanbeturnedonatanytime.
Red
TVmayrequireservice.
TurnofftheTVandunplugthesetfromtheACpowersource.
Waitoneminuteandthenplugthesetbackin.SeeAppendixE.
IftheredLEDisstillon,contactyourdealeroraMitsubishi
AuthorizedServiceCenter.Gotowww.mitsubishi-tv.comorcall
1-800-332-2119toreceiveAuthorizedServiceCenterinformation.
POWER Indicator
POWER
The TV control panel is located
on the side.
TheTV’sIR(infrared)sensor
receivessignalsfromthe
remotecontrol.Donotcover
thesensor.
IR Sensor
12 1. Basic Setup and Operation
Setting Up Other Inputs
ConnectyourdevicestotheTV,makingnoteof
1.
whichTVinputjackisusedforeachdevice.See
“TVConnections,”page16,forrecommendations.
Poweronthedevicestoensuredetection.
2.
PowerontheTV.
3.
TheTVwilldisplaytheNew Device Foundscreen
foreachnewconnectionitdetectsLearnmore
aboutAutoInput/AutoOutputSensingonthe
oppositepage.
Selectthedevicetypeifthedeviceisnotrecog-
4.
nizedautomatically.
Sample New Device
Found screen.
153 Series.
5.
YoucanperformNetCommandIR
“learning”afterselectingthedevicetypeorata
latertimewhenconvenient.Toperformnow,high-
lightNetCommandandpress
ENTER
.See
“Initial
NetCommandSetup,”page54or“SettingUpA/V
ReceiverControl,”page59.
Important Note for NetCommand IR Users
153 Series. Besuretoselectthecorrectdevice
typehere.Althoughyoucanchangethedevicetype
laterintheInputs>Namemenu,any“learned”Net-
CommandIRcodeswillbeerasedwhenyoumake
thechange.
Press
6.
BACK
toclosetheNew Device Foundscreen.
TheTVwillthendisplaytheNew Device Found
screenforthenextconnectionitfinds.
Channel Scan for Digital Channels
If you skip this step, the TV cannot receive digital
channels.
Ifusinganantennaordirectcableservice(nocable
box),connecttheincomingcoaxialcabletotheTVs
ANT
input.Refertopage20.
Youmustperformachannelscantoenablereception
ofallavailablehigh-definitionandstandard-definition
digitalchannels.Thechannelscanwillsearchfor
channelsavailablelocallyandsavethemtomemory.
Memorizing Channels with Channel Scan
For the ANT input
To start channel memorization
PowerontheTV.
1.
Press
2.
MENU
andopentheInitial > Channelmenu.
Start channel memorization from the Initial > Channel
menu.
Press
3.
ENTER
toenterthemenu.
Select
4.
Ant Airifconnectedtoan
over-the-airantenna.SelectAnt
Cablefordirectcable(service
withoutacablebox).
Highlight
5.
Scanandpress
ENTER
.
Channelmemorizationmaytakeup
to15minutestocomplete.
To stop channel memorization before completion,
press
CANCEL
.
UsetheInitial > Channel>Editmenu(page45)for
additionalchanneloptions,suchasaddingordeleting
channelsfrommemory.
Setting Up TV Inputs
1. Basic Setup and Operation 13
About Auto Input Sensing/
Auto Output Sensing
ThisTV’sEasyConnect™AutoSensingfeature
detectsmostconnectionsautomatically.
Auto Sensing for Most Devices
Whenyoufirstconnectadevice,theTVwill:
a. Detecttheconnecteddeviceandautomatically
switchtoit.
b. Promptyoutoidentifythedevicetype.
c. 153 Series.PromptyoutoperformNetCommand
set-upforthedevice,ifavailable.
d. Repeatthesestepsforanyothernewlydetected
devices.
Which Jacks Trigger Auto Sensing?
TV Jacks and
Auto Sensing
Auto
Sensing
No Auto
Sensing
Y/VIDEO
(detectedascompositevideo)
Y/VIDEO
plus
Pb
(detectedas
componentvideo)
HDMI
USB
DIGITAL AUDIO OUTPUT
(orangejack)
AVR AUDIO OUTPUT
(
redjack)
SUBWOOFER OUTPUT
(blackjack)
DIGITAL AUDIO INPUT
(orangejack)
ANT
(Antenna)
IR NetCommand Output/External Con-
troller Input
(153series)
TheTVmaynotdetectanHDMIdevicewhen
thedeviceispoweredoff
.Detectionofthe
devicewilloccurthenexttimeitispoweredon.
When You First Connect a Device
Most Device Types.•
Selectthedevicetypefrom
theon-screenlist.Thedevicetypeyouselecthere
willappearasadeviceiconinthe
Activitymenu.
A/V Receiver•
TheTVdetectsaudioconnectionsonthe- DIGITAL
AUDIO OUTPUTjackandtheright(red)AVR
AUDIO OUTPUTjack.
ForanHDMIA/Vreceiver,select- AVRfromthe
listofdevicetypesiftheA/Vreceiverisnot
recognizedautomatically.
HDMI CEC Devices Compatible with the •
TVs HDMI Control Feature.
CompatibleCEC-
enabledHDMIdevicesareoftenrecognizedauto-
maticallybytheTV.
HDMIControlmayallowyou
tocontrolsomefunctionsofaCEC-enableddevice.
SeeAppendixC,“HDMIControlofCECDevices.”
New Device
Found screen
for a device with
HDMI control
enabled. Select
On to enable
the TVs CEC
control of the device. In some
cases, as in the example above,
you will also be prompted to select a device name.
Tips on Auto Sensing
Chooseadifferentnameforeachinput.•
Theantennainput(•
ANT
)isneverdetected,
althoughyoucanturnofftheunusedantenna
inputintheInputs>Namemenu.
Changethedevicetypedisplayedinthe• Activity
menuintheInputs > Namemenu(page47).You
mustswitchtoadifferentinputbeforechanging
thedevicetype.
153 Series.• Any“learned”NetCommandIRcodes
willbeerasedifyouchangethedevicetypeinthe
Inputs > Namemenu.
Reactivating Auto Sensing for an HDMI Input
WhenyoudisconnectanHDMIdevice,AutoSensingis
disableduntilyouperformthesesteps.
Switchtoanyinputotherthantheonetobedis-1.
connected.
DisconnecttheHDMIdevice.2.
DeletetheremovedHDMIdeviceinthe3. Inputs>
Namemenu(see“RemovinganHDMIDevice,”
page76).
ConnectthenewHDMIdeviceandthe4. New
Device Foundscreenwilldisplay.
Setting Up TV Inputs, continued
14 1. Basic Setup and Operation
Watching Broadcast TV
TV Connected to an Antenna, Direct Cable Service,
Cable Box, Set-Top Box, or Satellite Receiver
Press
1.
ACTIVITY
.
Press
2.
and toselectabroadcastsource.If
younameddevicesduringAutoInputSensing,
selectaninputfromtheWatch TVgroup.
Note: FormoreabouttheActivitymenu,seepage24.
Activity menu, antenna input selected
Press
3.
ENTER
toswitchtotheinput.
TunetoachannelontheANTinputusinganyof
4.
thesemethods.
Enterthechannelnumberusingthenumber•
keysontheremotecontrolandpress
ENTER
.
Foratwo-partdigitalchannel,suchas3-1,
press
3
CANCEL
1
toenteradash(separator).
Press•
CHANNEL UP/CHANNEL DN
(+,)tochange
channelsonechannelatatime.
Press•
(LAST)
toswitchbacktotheprevi-
ouslytunedchannel.
Antenna or Direct Cable Only.• Press
GUIDE
to
displayChannelViewchannellistings,highlight
achannelnumber,andpress
ENTER
totune.
Watching DVDs or Videos
TV Connected to a DVD Player, DVR, or VCR
Press
1.
ACTIVITY
.
Press
2.
and toselectamoviesource.Ifyou
nameddevicesduringAutoInputSensing,select
aninputfromtheWatch Moviegroup.
Activity menu, DVD input selected
Press
3.
ENTER
toswitchtotheinput.
Basic TV Operation
1. Basic Setup and Operation 15
Making Picture Adjustments
Togetthebestpictureunderdifferentviewingcondi-
tions,setthePictureModebeforechangingothervideo
settings.Pictureadjustmentsaredescribedonpages
38,41,and42.
Press
1.
MORE
.
Press
2.
8
(VIDEO).
Press
3.
todisplaythePicture Modeadjust-
ment.
Press
4.
 toselectaPictureModeusingthese
guidelines:.
Name When to Use
Brilliant
Underbrightlight
Game
Withgamingconsoles
Bright Formostdaytimeviewing
Natural Formostnighttimeviewing
Press
5.
todisplaythenameofthenextadjust-
mentyouwant.
Press
6.
 tomaketheadjustment.
Press
7.
BACK
toclearorjustwaitforthedisplayto
clearafterafewsecondsofinactivity.
Additionalpictureadjustmentsaredescribedonpages
41and42.
Audio Settings
Changing Audio Settings
Press
1.
MORE
.
Press
2.
9
(AUDIO).
Press
3.
todisplaythenameoftheadjustment
youwant.
Press
4.
 tochangethesetting.
Changing the Audio Output
ToswitchaudiooutputfromtheinternalTVspeakersto
aconnectedexternalsoundsystemorheadphones:
Press
1.
MORE
.
Press
2.
9
(AUDIO).
Press
3.
untiltheSpeakersoptionisdisplayed.
TheSpeakersoptionwilldisplayonlyifaconnec-
tionhasbeendetectedononeoftheTV’saudio
outputs.
Press
4.
toswitchbetweenTVandeitherAV
ReceiverorHeadphones.
Other TV Features
TosettheTVClocksee• page44.SettheTV
ClockifyouplantousetheTVTimer(page44)or
ChannelView(page25)features.
Tosetparentalcontrols,seethe• Lockmenu,page
49.
Tochangetheinputnamesthatappearinthe•
Activitymenu,seeInputs>Nameoptions,page
47.
Toprogramtheremotecontroltooperateother•
A/Vdevices,seeAppendixB,“Programmingthe
RemoteControl,”page67.
ToactivateAudioLocktocontrolanexternalsound•
systemwiththeTVsremotecontrolleftin
TV
mode.
Seepage68.
TocontrolcompatibledevicesusingHDMICEC•
control,seeAppendixC,“HDMIControlofCEC
Devices,”page74.
Toviewstillandmovingdigitalcameraimageson•
theTV,see“CameraImagesandMusicFiles,”page
30.
153 Series.• TocontrolA/VdeviceswithNetCom-
mand,seechapter5,“NetCommandIRControlfor
MostDevices”on(page52).
Basic TV Operation, continued
Other Information
General Cleaning.• See“CleaningRecommenda-
tions,”page77.
Troubleshooting, Service, and Product Support.• 
SeeAppendixE,page78.
Warranty Information.• SeetheTVwarrantyon
page89.
16
2
TV Connections
Auto Input/Auto Output Sensing
TheTV’sAutoSensingfeatureautomaticallyrecognizes
mostconnectionsandpromptsyoutoidentifythetype
ofdeviceconnected.Seepage13formoreonAuto
Sensing.
Connection Types
Usetheconnectiontypesavailableonyourinput
devicesthatwillgivethebestvideoquality.For
example,chooseHDMIovercomponentvideo,and
choosecomponentvideoovercompositevideo.
Picture Quality
Forbestpicturequality,routesignalsdirectlyfromthe
inputdevicetotheTVwheneverpossible.
Surround Sound
Forbestsurroundsoundaudioquality,routeaudioor
HDMIcablesfromthesourcedevicedirectlytoyourTV
(forSoundProjector)ordirectlytoyourA/Vreceiverif
usinganexternalsoundsystem.
IMPORTANT
Accessory items such as cables, adapters,
splitters, or combiners required for TV
connections are not supplied with the TV.
These items are available at most electronics
stores.
Before You Begin
Cable Management
1
2
Install the cable tie
(supplied) in one of
the four mounting
holes on the back.
Lock the cable tie in place
by pushing the end into
the mounting hole.
To remove the cable tie,
squeeze the side tabs and
pull out.
Sample cable routing. Secure
the cable bundle with the
release tab facing out.
Press the release tab to
loosen the cable tie.
2. TV Connections 17
Inputs and Outputs
13
4
2
HDMI
(page19)
DIGITAL
AUDIO
OUTPUT
(page22)
SUBWOOFER
OUTPUT
(page23)
IR
NetCommand Output/
External Controller Input
153 series
NetCommand,page53
ExternalControllerInput,
page18
VIDEO
(compositevideo,
page21)
VIDEO
(compositevideo,
page21;withanaudio-
onlydevice,page23)
Y Pb Pr
(componentvideo,
page19)
Y Pb Pr
(componentvideo,
page19)
ANT
(page20)
USB
(page30)
VIDEO
(compositevideo,
page21)
Y Pb Pr
(component
video,page19)
AVR AUDIO OUTPUT
R L
Connector Panels
2
HDMI
(pages19,22)
9
DVI/PC AUDIO
INPUT
(page20)
AVR AUDIO
OUTPUT
(page22)
DIGITAL AUDIO
INPUT
(page19)
5
6
8
10
3
4
7
3
4
11
Calibration
Microphone Input
153 series
(page 35)
18 2. TV Connections
Inputs and Outputs, continued
1. ANT (Antenna)
Connectyourmainantennaordirectcableservice(no
cablebox)to
ANT
.The
ANT
inputcanreceivedigital
andanalogover-the-airchannelsfromaVHF/UHF
antennaornon-scrambleddigital/analogcablesource.
2. HDMI™ Inputs
(High-Definition
Multimedia Interface)
TheHDMIinputssupportuncompressedstandardand
high-definitiondigitalvideoformats,PCMdigitalstereo
audio,anddigital5.1surroundsound.Theseinputsare
HDCP(High-BandwidthDigitalCopyProtection)compliant.
Mitsubishi recommends you use category 2 HDMI
cables,alsocalledhigh-speedHDMIcables,toconnect
HDMI1.3sourcedevices.High-speedcategory2cables
bringyouthefullbenefitsofDeepColorandx.v.Color.
TheTV’sHDMIinputsarecompatiblewithmanyDVI-D
andHDMIcomputervideosignals.
UsetheHDMIinputstoconnecttoCEA-861HDMIcom-
pliantdevicessuchasahigh-definitionreceiverorDVD
player.Theseinputssupport480i,480p,720p,1080i,
and1080pvideoformats.
TheseHDMIinputscanalsoacceptdigitalDVIvideo
signals.Toconnectadevice’sDVIoutputtotheTV’s
HDMIinput,useanHDMI-to-DVIadapterorcableplus
analogaudiocables.Connecttheanalogaudiocablesto
the
DVI/PC INPUT AUDIO
jacksontheTVtoreceiveleft
andrightstereoaudiofromyourDVIdevice.
3. Y Pb Pr (Component Video)
Connectdeviceswithcomponentvideooutputstothis
jack.Usetheadjacent
AUDIO R
and
L
jacksifyouwish
tosendaudiototheTV.
4.
VIDEO
(Composite Video)
ConnectaVCR,DVDplayer,standardsatellitereceiver,
orotherA/VdevicetotheTV.Usetheadjacent
AUDIO
R
and
L
inputsifyouwishtosendaudiototheTV.
5. AVR AUDIO OUTPUT
Use
AVR AUDIO OUTPUT
tosendanalogaudioofthe
currentprogramtoananalogA/Vsurroundsoundreceiver
orstereosystem.Digitalaudiofromdigitalchannelsand
HDMIdevicesisconvertedtoanalogaudiobytheTVfor
outputonthisjack.Thisistheonlyaudioconnection
neededtotheTVifusingananalogA/Vreceiverorstereo
system
.
Headphones.Thesejackscanalsobeusedforhead-
phonesthatacceptstandardlinelevelaudiosignals.
Anadaptermaybeneeded.
6. DIGITAL AUDIO INPUT
ThisinputsendsdigitalsurroundsoundtotheTV’s
speakerarrayfromadevice,suchasaDVDplayer,con-
nectedto
INPUT 2
.
7. SUBWOOFER OUTPUT
ConnectapoweredsubwoofertocomplementSound
Projectorspeakereffects.
8. DIGITAL AUDIO OUTPUT
ThisoutputsendsDolbyDigitalorPCMdigitalaudio
toyourdigitalA/Vsurroundsoundreceiver.Incoming
analogaudioisconvertedbytheTVtoPCMdigitalaudio.
IfyouhaveadigitalA/Vreceiver,inmostcasesthisisthe
onlyaudioconnectionneededbetweentheTVandyour
A/Vreceiver.
9. DVI/PC AUDIO INPUT
WhenconnectingaDVIdevicetooneoftheTVsHDMI
inputs,usethesejackstosendleftandrightanalog
audiototheTV.
10. IR–NetCommand Output/External
Controller Input
153 Series.UseanIRemittercablewiththisjackto
sendcontrolsignalstoexternalIRremote-controlled
devices.Alternatively,yourprofessionalinstallercan
usethisjackastheinputforanexternalcontroller.
ConnecttothisjackandwhentheNew Device Found
screenappears,selectoperationofthejackaseither
aninput(foranexternalcontroller)orasanoutput(for
NetCommandIRcontrol).Seepage53.
11. USB
TheTVcanreadJPEGphotofilesandmp3orwmamusic
filesfromaUSBdeviceconnectedtotheUSBport.
HDMI Cable Categories
HDMIcablesareavailableasCategory1andCategory2
types.
Category 2 Cables• (alsocalledhigh-speedHDMI
cables).Newer,HDMI1.3-compliantDVDplayers,
videogames,andset-topboxesrequireCategory2
cables,suitableforclockfrequenciesupto340MHz
ordataratesofupto10.2gigabitspersecond.Use
category2cablesforhigh-speed1080pHDsignals
carryingextendedcolorencodings(i.e.,30ormore
bits,alsocalledDeepColor).Category2cablesare
alsosuitableforstandardHDTVsignals.
Category 1 Cables• (alsocalledstandardHDMI
cables).Category1cablesmaybeunmarked.They
aresuitableforstandardHDTV720p,1080i,and
1080psignalswith8-bitcolordepth.Usecategory1
cablesforclockfrequenciesupto74.25MHzordata
ratesofupto2.23gigabitspersecond.
2. TV Connections 19
H
DMI Device
HDTV Cable Box, Satellite Receiver, DVD/
Blu-ray Player
Suitable for use with Sound Projector surround
sound
Required:HDMI-to-HDMIcable.
ConnectanHDMIcablefromtheTVbackpaneltothe
HDMIdeviceoutput.HDMIdevicesprovidevideoand
audiothroughthesinglecable.Thisconnectionsends
digitalsurroundsoundfromthesourcedevicetothe
TV’sspeakerarray.
Mitsubishirecommendsyouusecategory2(high-
speed)HDMIcablestoconnectHDMI1.3source
devices.High-speedcategory2cablesbringyouthe
fullbenefitsofDeepColorandx.v.Color.See“HDMI
CableCategories”ontheoppositepageformoreon
HDMIcabletypes.
AVR AUDIO OUTPUT
R
L
Pb YPr
AUDIO OUT
VIDEO OUT
LR
TV
Any device with
HDMI output
HDMI-to-HDMI
cable
Y Pb Pr Component Video Device
HDTV Cable Box, Satellite Receiver, DVD/
Blu-ray Player
Suitable for use with Sound Projector surround
sound
IfyoursourcedevicehasanHDMIoutput,usethe
connectionsforHDMIdevicesdescribedonthispage
insteadofcomponentvideo.
Required:
1. RCA-typecomponentvideocables
2. Audiocable(s)
2a. Digitalaudiocable
or
2b.Left/rightanalogstereoaudiocables.
Note:
ToheardigitalsurroundsoundfromtheTV’s•
SoundProjectorspeakerarray,connectthedigital
audiooutputfromthedevicetotheTV’s
DIGITAL
AUDIO INPUT
jack.
Toheardigitalsurroundsoundfromanexternal•
soundsystem,connectthedigitalaudiooutput
fromthedevicedirectlytoyourdigitalA/Vreceiver.
AVR AUDIO OUTPUT
R
L
Pb
Pr
Y/ VIDEO
AUDIO
L
R
Pb YPr
AUDIO OUT
DIGITAL
AUDIO OUT
VIDEO OUT
LR
Incoming from
cable service or
satellite dish
Any device with
component video
output
TV
1.
2a.
2b.
or
CABLE IN or
SATELLITE IN
20 2. TV Connections
DVI Video Device
Cable Box, Satellite Receiver, DVD Player
ConnectDVIdevices(digitalonly)totheTVsHDMI
inputjacks.
Required:
1. DVI-to-HDMIcableorDVI/HDMIadapterandHDMI
cable
2. Left/rightanalogaudiocables.
Somedevicesrequireconnectiontoananaloginput
firstinordertoviewon-screenmenusandtoselectDVI
astheouput.Pleasereviewyourequipmentinstruc-
tionsforDVIconnectivityandcompatibility.
Note: TheHDMIconnectionsupportscopyprotection
(HDCP).
AVR AUDIO OUTPUT
R
L
Pb YPr
AUDIO OUT
VIDEO OUT
LR
DVI OUT
ANALOG
AUDIO OUT
R
L
TV
1.
Any device with DVI output
2.
Antenna or Cable TV Service
ConnecttheincomingcabletotheTV’s
ANT
input.
ANT
IN
OUT
Cable TV
service
UHF
antenna
VHF
antenna
TV
Not recommeded. Other
connection types provide
better quality audio and video.
Direct cable (no cable box)
or
or
Older
cable
box
300-ohm-to75-
ohm combiner
(side view)
AVR AUDIO OUTPUT
R
L
AUDIO
OUT
COMPOSITE
VIDEO OUT
L
R
AUDIO
R
L
TV
1.
2.
VCR or
other
device with
composite
video
output
Composite Video Device
VCR or other device with composite video
output
Required:
1. Compositevideocable(usuallyyellow)
2. Analogstereoaudiocables.
/