RCS NLM-200A is an End-of-Line module for VARES-1500/2000 voice evacuation systems. It is used to create reference load at the monitoring frequency of 20 kHz. This allows for more accurate and less sensitive monitoring of load impedance, especially in cases where a large number of loudspeakers is connected to a long line. The NLM-200A is required for reliable impedance monitoring of a loudspeaker line and should be connected to the end of the loudspeaker line in parallel, preferably inside the last loudspeaker on the line.
RCS NLM-200A is an End-of-Line module for VARES-1500/2000 voice evacuation systems. It is used to create reference load at the monitoring frequency of 20 kHz. This allows for more accurate and less sensitive monitoring of load impedance, especially in cases where a large number of loudspeakers is connected to a long line. The NLM-200A is required for reliable impedance monitoring of a loudspeaker line and should be connected to the end of the loudspeaker line in parallel, preferably inside the last loudspeaker on the line.
RCS NLM-200A is an End-of-Line module for VARES-1500/2000 voice evacuation systems. It is used to create reference load at the monitoring frequency of 20 kHz. This allows for more accurate and less sensitive monitoring of load impedance, especially in cases where a large number of loudspeakers is connected to a long line. The NLM-200A is required for reliable impedance monitoring of a loudspeaker line and should be connected to the end of the loudspeaker line in parallel, preferably inside the last loudspeaker on the line.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI