2. Computers & electronics
  3. Audio & home theatre
  4. DVD players
  5. jWIN
  6. JD-VD765

jWIN JD-VD765 Quick Connection Manual

  • Hello! I am an AI chatbot trained to assist you with the jWIN JD-VD765 Quick Connection Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
jWIN
¨
21
Y
Pb/Cb
Pr/Cr
VIDEO INPUT
COMPONENT
VIDEO INPUTS
COMPONENT
VIDEO INPUTS
AUDIO L
AUDIO R
MULTI-FEATURE TV
REAR PANEL INPUT
EXTERNAL TV
REAR PANEL INPUTS
3
2
Y
Pb/Cb
Pr/Cr
MULTI-FEATURE TV
REAR PANEL INPUT
JDVD765QCGV10M10EN07132005
3
JD-VD765
QUICK CONNECTION GUIDE
FOR THE EXTERNAL A/V SYSTEM (USING COMPOSITE VIDEO) OUT
21
VIDEO
INPUT
AUDIO
L
AUDIO
R
Cable Connection Instructions
EXTERNAL TV
REAR PANEL INPUTS
Connect the supplied audio cable from the JD-VD765's
Audio port to the external TV's Audio Input (stereo) ports.
Connect the supplied video cable from the JD-VD765's
Video port to the External TV's Video Input port.
Turn power ON at the JD-VD765 and at the External TV.
Press PLAY to start the disc in the JD-VD765.
1
2
3
FOR THE EXTERNAL A/V SYSTEM (USING COMPONENT VIDEO) OUT
Cable Connection Instructions
Connect the supplied audio cable from the JD-VD765's Audio port
to the Multi-Feature TV's Audio Input (stereo) ports.
Connect a Component Video cable (not supplied) from
the JD-VD765's S-Video/P-Scan port to the Multi-Feature TV's
Component Video Input ports.
* Without a disc installed, you must also enter the Setup Mode (by pressing the Remote
Control's SETUP button), then select Screen Setup, then its Video Output option, and
change it to P-SCAN. Once done, exit the Setup Mode.
Turn power ON at the JD-VD765 and at the Multi-Feature TV.
Press PLAY to start the disc in the JD-VD765.
1
2
3
FOR THE EXTERNAL A/V SYSTEM (USING S-VIDEO) OUT
21
VIDEO
INPUT
AUDIO
L
AUDIO
R
Cable Connection Instructions
Connect the supplied audio cable from the JD-VD765's
Audio port to the External TV's Audio Input (stereo) ports.
Connect an S-Video cable (not supplied) from
the JD-VD765's S-Video output port to the External
TV's S-Video input port.
Turn power ON at the JD-VD765 and at the External TV.
Press PLAY to start the disc in the JD-VD765.
1
2
* S-Video cable not included. Obtain locally.
* The Component and the Coaxial cables are not included. Obtain locally.
* Component cable not included. Obtain locally.
FOR THE EXTERNAL A/V SYSTEM (USING COMPONENT VIDEO/DIGITAL AUDIO) OUT
1
Cable Connection Instructions
If your Multi-Feature TV has a Digital Coaxial Audio Input jack, you must
connect the proper digital coaxial audio cable (not supplied) from the
JD-VD765’s Coaxial port to the TV's Digital Coaxial Audio Input jack,
as shown.
* Without a disc installed, you must also enter the Setup Mode (by pressing the Remote
Control's SETUP button), then select Audio Setup, then its Digital Out option, and choose
between SPDIF/RAW (the default) and SPDIF/PCM, according to your preference.
Connect a Component Video cable (not supplied) from the JD-VD765's
S-Video/P-Scan port to the Multi-Feature TV's Component Video Input
ports.
* While in the Setup Mode, select Screen Setup, then its Video Output option,
and change it to P-SCAN. Once done, exit the Setup Mode.
Turn the DVD Player and TV Power ON.
2
1
3
S-VIDEO
INPUT
DIGITAL
COAX AUDIO
INPUT
/