Aastra Dialog 3214 User manual

Category
IP phones
Type
User manual

This manual is also suitable for

Cover Page Graphic
Place the graphic directly on the page, do not care about
putting it in the text flow. Select Graphics > Properties
and make the following settings:
Width: 15,4 cm (Important!)
Height: 11,2 cm (May be smaller)
Top: 5,3 cm (Important!)
Left: -0,3 cm (Important!)
This text should then be hidden.
Dialog 4224 Operator / Dialog 3214
BusinessPhone Communication Platform
User Guide
BusinessPhone – Dialog 4224 Operator / Dialog 32142
EN/LZTBS 170 340 R2A
© Aastra Telecom Sweden AB 2008. All rights reserved.
3BusinessPhone – Dialog 4224 Operator / Dialog 3214
Table of Contents
Table of Contents
page
Welcome .......................................................... 4
Description ....................................................... 6
Attendance .................................................... 19
Incoming Calls ............................................... 21
Outgoing Calls ............................................... 23
Phone Book ................................................... 34
During Calls .................................................... 35
Call Ordering .................................................. 42
Call Metering .................................................. 45
Call Forwarding .............................................. 54
Absence Information ...................................... 57
Messages ...................................................... 62
Security .......................................................... 73
Group Features .............................................. 76
ISDN Facilities ................................................ 81
Other Useful Features ..................................... 86
Write Text ....................................................... 92
Accessories ................................................... 94
Useful Hints .................................................. 100
Installation .................................................... 101
Glossary ....................................................... 112
Index ............................................................ 116
Welcome
BusinessPhone – Dialog 4224 Operator / Dialog 32144
Welcome
Welcome to the User Guide for the Dialog 4224 Operator /
Dialog 3214 in the BusinessPhone Communication Platform from
Aastra. The BusinessPhone Communication Platform consists of
BusinessPhone Compact, BusinessPhone 50,
BusinessPhone 128i and BusinessPhone 250.
The features described in this User Guide are related to version 7.0
or higher of the BusinessPhone Communication Platform. Some
might not work in earlier versions of the system and/or might be
protected by a licensethat has to be bought separately.
The User Guide describes the facilities of the BusinessPhone
Communication Platform and the Dialog 4224 Operator /
Dialog 3214 with a default programming. There may be some
differences in the way your phone is programmed. Please consult
your system administrator if you need further information.
This guide will demonstrate how the Operator’s Console helps
operators handle the functions of the BusinessPhone
Communication Platform. The Dual-Function keys allow two
functions to be combined on the same keys.
The latest version of this User Guide can also be downloaded from:
http://www.aastra.com
Note: Dialog 4224 Operator / Dialog 3214 is a system
telephone, i.e. it can only be used for an Aastra private
branch exchange that supports this type of telephone.
5BusinessPhone – Dialog 4224 Operator / Dialog 3214
Welcome
Copyright
All rights reserved. No parts of this publication may be reproduced,
stored in retrieval systems, or transmitted in any form or by any
means, electronic, mechanical, photocopying, recording or
otherwise, without prior written permission of the publisher except
in accordance with the following terms.
If this publication is made available on Aastra media, Aastra gives
its consent to downloading and printing copies of the content
provided in this file only for private use and not for redistribution. No
parts of this publication may be subject to alteration, modification
or commercial use. Aastra will not be liable for any damages arising
from use of an illegal modified or altered publication.
Aastra is a registered trademark of Aastra Technologies Limited. All
other trademarks mentioned herein are the property of their
respective owners.
Warranty
AASTRA MAKES NO WARRANTY OF ANY KIND WITH REGARD
TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. Aastra shall not be liable for
errors contained herein nor for incidental or consequential
damages in connection with the furnishing, performance or use of
this material.
Declaration of Conformity
Hereby, Aastra Telecom Sweden AB, SE-126 37 Hägersten,
declares that this telephone is in conformity with the essential
requirements and other relevant provisions of the R&TTE
directive 1999/5/EC.
Details to be found at: http://www.aastra.com/sdoc
Description
BusinessPhone – Dialog 4224 Operator / Dialog 32146
Description
Dialog 4224 Operator
1
2
3
4
5
6
7
7
8
8
9
10
11
12
19
19 19
13
14
15
16
17
18
21
20
7BusinessPhone – Dialog 4224 Operator / Dialog 3214
Description
1Display
5x40 characters. See section “Display info” on page 14.
2 Menu Function keys
The functions depend on the traffic state and will be shown on the
last line of the display. When you are requested to (see display),
press the required key to access the function.
3 2nd
Key for access to secondary key functions (These functions are
stated on the second line of the corresponding key).
4 Message
To send and receive messages. See section “Messages” on
page 62.
5 Info
To enter information. See section “Absence Information” on
page 57.
6 Dual-Function programmable keys
Storing numbers, program functions.
7 Clear key left / Clear key right
To disconnect the left or right call, see section “Incoming Calls” on
page 21.
8 Speech left / Speech right
To have speech connection with the left or right displayed caller.
Also used to intrude on a busy extension. See sections “Incoming
Calls” on page 21 and “Outgoing Calls” on page 23.
9 Off Duty
Sets the console in Off Duty state. See section “Attendance” on
page 19.
10 Monitor
To monitor a call on hold. See sections “Supervise long distance
calls” on page 32 and “Individual Hold and monitor” on page 39.
11 Loop 1 / 2 / 3
To put calls on hold or camp-on calls. See sectionsOutgoing
Calls” on page 23 and “During Calls” on page 35.
12 Notify
To reserve an extension or external line when you receive busy
extension or external line. See section “Outgoing Calls” on
page 23.
Description
BusinessPhone – Dialog 4224 Operator / Dialog 32148
13 Mute
To switch the microphone on or off. See section “During Calls” on
page 35.
14 Loudspeaker on/off
To switch the loudspeaker on or off. See section “During Calls” on
page 35.
15 Headset key
See section “Headset - Dialog 4224 Operator” on page 96.
16 Answer/Extend / Enter
a. To answer/extend calls. See sections “Incoming Calls” on
page 21, “Outgoing Calls” on page 23, “Call Metering” on
page 45, “Group Features” on page 76 and “Other Useful
Features” on page 86.
b. To enter/select information. See sections “Attendance” on
page 19 and “Messages” on page 62.
17 Volume control
18 Microphone
19 Optional key panel
17 Dual-Function programmable keys per key panel.
Four panels can be connected.
Note: Use only optional key panels of type DBY 419 01.
20 Loudspeaker
21 Handset with hearing aid function
Please note: The handset may attract and retain small
metal objects in the earcap region.
9BusinessPhone – Dialog 4224 Operator / Dialog 3214
Description
Dialog 3214
1Display
5x40 characters. See section “Display info” on page 14.
2 Menu Function keys
The functions depend on the traffic state and will be shown on the
last line of the display. When you are requested to (see display),
press the required key to access the function.
3 2nd
Key for access to secondary key functions (These functions are
stated on the second line of the corresponding key).
4 Message
To send and receive messages. See section “Messages” on
page 62.
1
2
21
3
4
5
6
7
8
9
10
11
12
13
8
9
14
15
16
17
18
19 19 19 19
6
20
Description
BusinessPhone – Dialog 4224 Operator / Dialog 321410
5 Info
Enter information. See section “Absence Information” on page 57.
6 Dual-Function programmable keys (A-C)
Storing numbers, program functions.
7 Dual-Function programmable key (B) / Headset key
a. Storing numbers and program functions.
b. The Headset function is only available with option unit
(DBY 410 02) installed. The Headset key is programmed by the
system administrator. See section “Accessories” on page 94.
8 Clear key left / Clear key right
To disconnect the left or right call, see section “Incoming Calls” on
page 21.
9 Speech left / Speech right
To have speech connection with the left or right displayed caller.
Also used to intrude on a busy extension. See sections “Incoming
Calls” on page 21 and “Outgoing Calls” on page 23.
10 Off Duty
Sets the console in Off Duty state. See section “Attendance” on
page 19.
11 Monitor
To monitor a call on hold. See sections “Supervise long distance
calls” on page 32 and “Individual Hold and monitor” on page 39.
12 Loop 1 / 2 / 3
To put calls on hold or camp-on calls. See sectionsOutgoing
Calls” on page 23 and “During Calls” on page 35.
13 Notify
To reserve an extension or external line when you receive busy
extension or external line. See section “Outgoing Calls” on
page 23.
14 Volume control
15 Mute
To switch the microphone on or off. See section “During Calls” on
page 35.
16 Loudspeaker on/off
To switch the loudspeaker on or off. See section “During Calls” on
page 35.
11BusinessPhone – Dialog 4224 Operator / Dialog 3214
Description
17 Answer/Extend / Enter
a. To answer/extend calls. See sections “Incoming Calls” on
page 21, “Outgoing Calls” on page 23, “Call Metering” on
page 45, “Group Features” on page 76 and “Other Useful
Features” on page 86.
b. Enter/select information. See sections “Attendance” on
page 19 and “Messages” on page 62.
18 Microphone
19 Optional key panel (A-Q)
17 Dual-Function programmable keys per key panel.
Four panels can be connected.
Note: If one or two key panels are used, the optional key
panel DBY 409 01 may be used. However, if three or four
key panels are used, all optional key panels must be of type
DBY 409 02.
20 Loudspeaker
21 Handset with hearing aid function
Please note: The handset may retain small metal objects
in the earcap region.
Description
BusinessPhone – Dialog 4224 Operator / Dialog 321412
Phone keys Dialog 4224 / Dialog 3214
This table gives you an overview of the different key design of the
Dialog 4224 Operator and the Dialog 3214. In this user guide you
will only find illustrations of the Dialog 4224 keys.
If you are using the Dialog 3214, please refer to the table below to
find out the appropriate key combination.
Key Dialog 4224 Dialog 3214
Answer/extend
ê Y
Clear left
Speech left
é k
Clear right
Speech right
è j
Headset
Ì
Headset h
Loudspeaker
À s
Mute
È m
Programmable
Function key
Ô g
Volume
ì V
13BusinessPhone – Dialog 4224 Operator / Dialog 3214
Description
Lamp indications
The key lamps on your telephone indicate with different signals the
traffic state of the ongoing call or function.
Ô
Extinguished lamp The function is not active.
ÕÔ
Steady light The function is active.
ÖÔ
Slowly flashing lamp The line (or function) is put on hold.
ÖÔ
Rapidly flashing lamp An incoming call or message waiting.
ÕÔ
Light with short breaks Ongoing call.
Description
BusinessPhone – Dialog 4224 Operator / Dialog 321414
Display info
The display assists your actions on the phone with step-by-step
instructions.
The tiltable display consist of 5 rows, with space for 40 characters
on each row. The fields in the display consists of the following
information.
When your phone is idle, the first (upper) line shows date, time,
temperature, name and extension number. The second line
presents queue information. The lower line presents the available
menu key functions.
During an external outgoing call the third line will show the directory
number of the external line and dialled/connected telephone
number. The fourth line displays the call type.
During an internal call the third line will show the extension number
and traffic state. The fourth line displays the caller’s name.
DATE, TIME & TEMP.|| SPECIAL INFO
QUEUE INFO ||
INCOMING CALLS || OUTGOING CALLS
CALLER INFO || CALLER INFO
menu1 menu2 menu3 menu4
12 May 10:35 +15°^|| OPERATOR 200
C= 0 I= 0 ||
||
||
directory redial prog
12 May 10:35 +15°^||
C= 0 I= 0 ||
|| 701 1234567890
|| EXTERNAL
save meter
12 May 10:35 +15°^||
C= 0 I= 0 ||
|| 1207 BUSY 0
|| SMITH
info
15BusinessPhone – Dialog 4224 Operator / Dialog 3214
Description
If you make an internal call to someone who has activated a
diversion, the first and second line shows the name and extension
number of the person you called and the third and fourth line
shows where the call is diverted.
During an external incoming call the third line will show the directory
number of the external line and traffic state. The fourth line displays
the caller’s telephone number and call type.
12 May 10:35 +15°^|| 203
C= 0 I= 0 || CHAMBERS DAVID
|| 201 FREE 1
|| BURNES BOBBY
bypass
12 May 10:35 +15°^||
C= 0 I= 0 ||
> 701 SPEECH<||
>123456 NEW<||
directory redial
Description
BusinessPhone – Dialog 4224 Operator / Dialog 321416
Status information
The status information of incoming and outgoing calls is sometimes
given as an abbreviation and sometimes as a complete word:
ABSENT
Radio Paging receiver not in use.
BLOCKED
Number or function blocked.
BUSY
Extension is busy (queue situation is displayed).
COMPLETE
Ordered Paging is completed.
CONGEST.
Congestion in the system, call cannot be put through.
C= 0
Number of calls waiting in the common queue.
DIVERSION, DIV
Call redirected.
FREE 1
Line 1 on called extension is free.
FREE 2
Line 1 on called extension is busy, but Line 2 is free.
I= 0
Number of calls waiting in the individual queue.
ICM
Intercom call.
INCOMPL.
The number was incomplete.
INF%
Voice information activated.
INF&
Text information activated.
INFO
The called extension has text or Voice info stored.
INQUIRY, INQ
Inquiry call.
INTRUSION
Intrusion into ongoing call.
MCID ACCEPTED
Malicious Call Identification accepted.
MCID REJECTED
Malicious Call Identification rejected.
METER, MET
Call charging.
NEWCALL, NEW
Call not previously answered.
RECALL
Recall of previously answered call.
RERO
An external incoming call was rerouted to the operator.
RESTR., REST
Restricted extension, calls cannot be handled.
RING
Ring to announce call.
SERIAL, SER
Serial calls.
SPEECH
Speech connection.
TRF
Transferred call.
VACANT, NU
Non assigned number.
WAIT
Radio Paging waiting.
+15°^
Indicates outside temperature and tendency (up or down) if your
telephone system is equipped with optional temperature sensor.
17BusinessPhone – Dialog 4224 Operator / Dialog 3214
Description
Ton e s
Tones are audible in the handset.
Dial tone
(System ready to accept digits)
Special dial tone
(System ready to accept digits,
active diversion on telephone)
Ringing tone
(Ringing signal to called party)
- repeated after 4 s
Special ringing tone
(Ringing signal to Line 2)
- repeated after 4 s
Busy tone
(Called party is busy)
Number unobtainable tone
(Called number not accessible or vacant)
Blocking tone
(Call cannot be executed due to congestion
or called party blocked)
Verification tone
(Verification that ordered function is
accessed)
Intrusion tone
(Sent to all parties during Intrusion)
Conference tone
(Sent to all participants in a Conference)
- repeated after 15 s
Description
BusinessPhone – Dialog 4224 Operator / Dialog 321418
Signals
Ringing signals are emitted from the phone.
Note: The tones and ringing signals in this guide refer to the
standard system but may vary between countries.
Internal ringing signal - repeated after 4 s
External ringing signal - repeated after 4 s
Automatic Callback signal
19BusinessPhone – Dialog 4224 Operator / Dialog 3214
Attendance
Attendance
These features are for re-routing your incoming external calls to an
alternative answering position.
Off Duty
When you activate Off Duty, all incoming external calls to the
operator queue will be routed to an alternative answering position.
Activate
Off Duty Ô Press to activate.
The lamp lights. Console is off duty.
Temporary change of alternative answering position is possible:
temp Press (see display).
z Type in the new alternative answering position.
Note: This procedure can only be performed by the last
active operator.
ê Press to confirm.
12 May 10:35 +15°^|| OFFDUTY ACTIVATED
C= 0 I= 0 || ANSW.ADDR: 1210
||
||
directory redial temp prog
Attendance
BusinessPhone – Dialog 4224 Operator / Dialog 321420
Deactivate
Off Duty ÕÔ Press again to deactivate.
The lamp extinguishes. Console attended.
Night Switch
This function switches the whole system to the Night Switch mode.
The Night Switch mode routes all incoming external calls to a
defined night answering position e.g. an answering machine.
Night Ô Press to activate (pre-programmed)
The lamp lights. Night Switch active.
Night ÕÔ Press again to deactivate (pre-programmed).
The light extinguishes. Night Switch passive.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120

Aastra Dialog 3214 User manual

Category
IP phones
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages