HARVIA Ventura User manual

Type
User manual
27122016/Y05-0315
VENTURA
Instructions for Installation of Ventura-sauna interior
Read also general instructions of installation
Verify bench height from your sauna plan. Regular bench heights have been
used in this manual.
2
2.
4,5 x 60 mm
4,5 x 60 mm
1.
6 x 70 mm
VENTURA
Installation of straight benches
Attach locking woods.
1000 mm
600 mm
Attach plywood pieces and bench
supports.
Support legs can be xed to the
longer benches if needed.
Verify bench height
from your sauna plan.
Regular bench heights
have been used in this
manual.
3
3.
4.
360 mm
500 mm
55 mm
Attach safety
railing to the wall
with the U-piece.
Attach backrests.
Lift shades to the
sheet metal brackets.
Attach sheet metal brackets for the lamp shades. Attach footrest to the bench
frame.
4
1.
VENTURA
Installation of the end support benches
2.
6 x 70 mm
1000 mm
600 mm
Attach plywood pieces and bench
supports.
Verify bench height
from your sauna plan.
Regular bench heights
have been used in this
manual.
4 x 30 mm (n. 6 kpl/ca 6 st.)
4,5 x 60 mm
Attach bench frames together.
Attach locking woods.
Support legs can be xed to the
longer benches if needed.
5
3.
4.
360 mm
500 mm
55 mm
4 mm
4 x 60 mm
300 mm
Attach backrests.
Lift shades to the
sheet metal brackets.
Attach sheet metal
brackets for the
lamp shades.
6
7
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

HARVIA Ventura User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI