2. HARVIA
  3. Ventura
Ventura

HARVIA Ventura User manual

  • Hello! I've reviewed the provided document, which contains instructions for installing the Ventura sauna interior. It covers the assembly of both straight and end support benches, including steps for attaching components like the footrest, backrests, and safety railings. I'm ready to answer any questions you might have about this installation process.
  • What should I verify before starting the installation?
    What is the purpose of the locking woods?
    What is attached to the bench frame?
27122016/Y05-0315
VENTURA
Instructions for Installation of Ventura-sauna interior
• Read also general instructions of installation
• Verify bench height from your sauna plan. Regular bench heights have been
used in this manual.
2
2.
4,5 x 60 mm
4,5 x 60 mm
1.
6 x 70 mm
VENTURA
Installation of straight benches
Attach locking woods.
1000 mm
600 mm
Attach plywood pieces and bench
supports.
Support legs can be xed to the
longer benches if needed.
Verify bench height
from your sauna plan.
Regular bench heights
have been used in this
manual.
3
3.
4.
360 mm
500 mm
55 mm
Attach safety
railing to the wall
with the U-piece.
Attach backrests.
Lift shades to the
sheet metal brackets.
Attach sheet metal brackets for the lamp shades. Attach footrest to the bench
frame.
4
1.
VENTURA
Installation of the end support benches
2.
6 x 70 mm
1000 mm
600 mm
Attach plywood pieces and bench
supports.
Verify bench height
from your sauna plan.
Regular bench heights
have been used in this
manual.
4 x 30 mm (n. 6 kpl/ca 6 st.)
4,5 x 60 mm
Attach bench frames together.
Attach locking woods.
Support legs can be xed to the
longer benches if needed.
5
3.
4.
360 mm
500 mm
55 mm
4 mm
4 x 60 mm
300 mm
Attach backrests.
Lift shades to the
sheet metal brackets.
Attach sheet metal
brackets for the
lamp shades.
6
7
/