2. evolur
  3. 8322F
8322F

evolur 8322F User manual

  • Hello! I'm your chat assistant. I've reviewed the assembly instructions for the Evolur Full Bed FULLBED-00. The document provides details on required parts, tools, and step-by-step process required for assembling the bed. Please feel free to ask me any questions you may have about installing your bed.
  • What tools are needed for assembly?
    Can I use power drills or drivers?
    What should I use to protect parts during assembly?
    How should I clean the surface?
    Are bed rails locked in place during assembly
FULL BED
AI - FULLBED-00
ASSEMBLY INSTRUCTIONS
Model shown is example only. Styles may vary
AI-FULLBED-00
Adult assembly required.
Small parts may present choking hazard prior to assembly.
that you follow the steps below:
1. Please read the instructions thoroughly
2. Identify all parts and hardware
3. You may need to provide the following tools:
Philips Head screw driver
Flat head screw driver
Hammer
Do Not Use Power Drills Or Drivers
To protect your parts during assembly please please place them on a soft surface. To clean surface, use only water on a damp cloth.
Do not use window cleaner or cleaning abrasive as it will scratch the surface and could damage the protective coating.
ASSEMBLY I NSTRUCTION S -Instructions pour l'assembla g e
ÉVOLUR - 1532 S. WASHINGTON AVE, PISCATAWAY, NJ 08854
AI-FULLBED-00 4
(NOT PROVIDED)
(NON FOURNI)
C x 20 (1-1/4”)
ASSEMBLY I NSTRUCTION S -Instructions pour l'assembla g e
HARDWARE AND TOOL DIAGRAM
A
A
B
B
B
B
B
AI-FULLBED-00 5
NOTE: MAKE SURE BED RAILS ARE LOCKED IN PLACE BEFORE MOVING TO NEXT STEP
REMARQUE: ASSUREZ-VOUS QUE LES BARRIÈRES DE LIT SONT VERROUILLÉS
EN PLACE AVANT DE PASSER À L'ÉTAPE SUIVANTE.
ASSEMBLY I NSTRUCTION S -Instructions pour l'assembla g e
C x 20 (1-1/4”)
AI-FULLBED-00 6
ASSEMBLY I NSTRUCTION S -Instructions pour l'assembla g e
AI-FULLBED-00 6
ASSEMBLY I NSTRUCTION S -Instructions pour l'assembla g e
Enter our monthly giveaway!
Simply scan the QRcode to register.
Chat with us!
For any questions or concerns or feedback.
Follow us on
to get your nursery featured on our social media.
@EvolurBaby @evolurbaby
/