DNAKE 280M-S8 User guide

280M-S8
Brand
DNAKE
Model
280M-S8
Category
Security camera accessories
Type
User guide

DNAKE 280M-S8 is a versatile device offering a range of features for enhanced security and communication. With its 7" capacitive touch screen and built-in camera, you can easily monitor your surroundings and answer door calls. The 2-way audio allows for clear conversation with visitors, while the alarm system provides an extra layer of protection.

DNAKE 280M-S8 is a versatile device offering a range of features for enhanced security and communication. With its 7" capacitive touch screen and built-in camera, you can easily monitor your surroundings and answer door calls. The 2-way audio allows for clear conversation with visitors, while the alarm system provides an extra layer of protection.

Quick Start Guide
280M-S8
290M-S8
902M-S8
904M-S3
Please follow the user manual for correct installation and
testing. If there is any doubt please call our tech-supporting
and customer center.
Our company applies ourselves to reformation and
innovation of our products. No extra notice for any change.
The illustration shown here is only for reference. If there is
any difference, please take the actual product as the
standard.
The product and batteries must be handled separately from
household waste. When the product reaches the end of
service life and needs to be discarded, please contact the
local administrative department and put it in the designated
collection points in order to avoid the damage to the
environment and human health caused by any disposal. We
encourage recycling and reusing the material resources.
Package Contents................................................... 1
Pictures..................................................................... 2
System Configuration............................................ 3
System Diagram...................................................... 4
Installation............................................................... 8
Safety Instructions................................................. 10
Quick Start GuideIndoor Monitor
M : ODEL 280M-S8/290M-S8/902M-S8
MODEL: 904M-S3
Quick Start Guide
Screw
ScrewIndoor Monitor
M : ODEL 280M-S8/290M-S8/902M-S8
MODEL: 904M-S3
Microphone
7'' capacitive
touch screen
Speaker
Power
Return Speaker
Camera
Microphone
Display
screen
MODEL: 904M-S3
Power
Return Speaker
Camera
Microphone
Display
screen
CAT-5e
CAT 5e+RVV2*1.0
CAT-5e+RVV2*1.0
CAT -5e +R VV2
*1.0
CAT-5e
RVV2*1.0
CAT -5e +R VV2
*1.0
CAT-5e+RVV2*1.0
CAT 5e
CAT-5e
(National Standard)
CAT-5e CAT-5e
220V
RVV2*1.0
CAT-5e+RVV2
*1.0
CAT-5e
RVV2*1.0
22 0V
CAT 5e
2F
1F
22 0V
22 0V
220V
2F
1F
Termina l
Power
N etwork Switc h
Terminal
Power
Network Switch
Fiber Optical
Tr an sce ive r
Door Station
22 0V
Termina l
Power
N etwork Switc h
22 0V
Terminal
Power
Network Switch
Fiber Optical
Tr an sce ive r
Door Station
Villa Area
Flat
Camera
220V
Termina l
Power
Ne twor k Switch
Fiber Optical
Tr an sce ive r
Outdoor
equipment box
Flat
Camera
Termina l
Power
Indoor equipment
box
Indoor equipment
box
Network
Swi tch
Four-core single mode fiber Four-core s ingle
mode fiber
Four-core single mode fiber
Four-core single
mode fiber
Fiber Optical
Tr an sce ive r
Fiber Optical
Tr an sce ive r
Fiber Optical
Tr an sce ive r
Fiber Optical
Tr an sce ive r
Ma Po we rster Station
Master Station
PC
Fiber Optical
Tr an sce ive r
Wall Door Station
Audio extension (optional)
22 0V
RVV2*0.5
CAT- 5e
22 0V
RVV2*0.5
CAT- 5e
Audio extension (optional)
Audio extension (optional)
Audio extension (optional)
Terminal
Power
Terminal
Power
Audio extension (optional)
22 0V
RVV2*0.5
CAT- 5e
22 0V
RVV2*0.5
CAT- 5e
Audio extension (optional)
Audio extension (optional)
Audio extension (optional)
Terminal
Power
Terminal
Power
22 0V
Power
Electr ic
Lock
Exit B utton
RVV2*1.0
RVV2*1.0
RVV2*0.5
Lock Pow er
Power
Electr ic
Lock
Exit B utton
RVV2*1.0
22 0V
RVV2*1.0
RVV2*0.5
Lock Pow er
RVV2*1.0
RVV2*0.5
El ectri c
Lock
L o c k Po w e r
Exit Button
RVV2*1.0
RVV2*0.5
Elect r ic
Lock
L o c k Po we r
Exit Button
Power
Electr ic
Lock
Exit B utton
RVV2*1.0
RVV2*1.0
RVV2*0.5
Lock Pow er
Power input interface connect with 12V power adapter.:
12V+
GND
12V+
GND
Power Interface DC 12V
CAT-5e
N etwo rk
Connect with outdoor panel, indoor monitor or other network equipment by
network switch.
When indoor monitor has P E function, the interface can supply power by o
connecting with P E network switch. If network interface has 12V power supply, o
pin No. 4 and of RJ45 interface should connect with +12V of power No. 5
interface, and pin No. 7 and 8 should connect with GND of power interface.
Netwo rk(P E )o
R 485s Interface
Power
280M-S8/902M-S8/904M-S3
Siren /Al arm
Interface of alarm zones with normally-open or normally-closed connects
switch.
When the alarm zone is triggered, it will output 12V/100mA power.
Alarm
Normally-closed sensor
Normally-open sensor
Siren equipment
Connect with interface device;R 485s
interface can output 12V/100mA power supply. If equipment to R 485 R 485s s
be connected doesn’t require the power supply, no need to connect +12V.
+12V
GND
485
485
RS485 Interface
+12V
GND
485
485
RS485 Equipment
V+
GND
A 1l
A 2l
A 3l
A 4l
A 5l
A 6l
A 7l
AL8
2.2 K
2.2 K
+12V GND
1 2
485+
3 4
485
RS485
+12V AL3AL1 AL5 AL7GND AL4AL2 AL6 AL8
1 53 7 92 64 8 10
Alarm
2 Wire
1 2
L+ L
Siren
1 2
V+ GND
290M-S8
+12V
GND
485
485
RS485 Interface
+12V
GND
485
485
Power input interface (nonpolar): input power over 2 wires.
Connect with smart home and module, etc. Offer 12V/100mA external alarm
power by RS485.
RS485 Equipment
L+
L-
2Wire
290A/AB
V+
GND
When alarm sensor is triggered, 12V/100mA power is output.
Siren Alarm facility
Alarm
Normally-open sensor
Normally-closed sensor
Each interface of 8 alarm can be connected with zones in three states
normally-open or normally-closed switch.
Offer 12V/100mA power by alarm interface.
+12V
GND
A 1l
A 2l
A 3l
A 4l
A 5l
A 6l
A 7l
AL8
MODEL: 280M-S8/290M-S8/902M-S8
Product size: 221.4x151.4x16.5mm
Screws
Bracket
Mounting Box
[Suggestion]: The camera should be 1450
1550mm above the ground. The camera at this
height can capture human face perfectly.
400~500mm
1450~1550mm
Wall
[Suggestion]: The camera should be 1450
1550mm above the ground. The camera at this
height can capture human face perfectly.
400~500mm
1450~1550m m
Product size: 270x168x15mm
Mounting Box Screws
MODEL: 904M-S3
Wall
In order to protect you and others from harm or your device from damage,
please read the following information before using the device.
Do not install the device in the following places:
Do not install the device in high-temperature and moist environment or
the area close to magnetic field, such as the electric generator, transformer
or magnet.
Do not place the device near the heating products such as electric heater
or the fluid container.
Do not place the device in the sun or near the heat source might , which
cause discoloration or deformation of the device.
Do not install the device in an unstable position to avoid the property
losses or personal injury caused by the falling of device.
Guard against electric shock, fire and explosion:
Do not use damaged power cord, plug or loose outlet.
Do not touch the power cord with wet hand or unplug the power cord by
pulling.
Do not bend or damage the power cord.
Do not touch the device with wet hand.
Do not make the power supply slip or cause the impact.
Do not use the power supply without the manufacturer's approval.
Do not have the liquids such as water go into the device.
Clean Device Surface
Clean the device surfaces with soft cloth dipped in some water, and then
rub the surface with dry cloth.
Other Tips
In order to prevent damage to the paint layer or the case, please do not
expose the device to chemical products, such as the diluent, gasoline,
alcohol, insect-resist agents, opacifying agent and insecticide.
Do not knock on the device with hard objects.
Do not press the screen surface. Overexertion might cause flopover or
damage to the device.
Please be careful when standing up under the device.from the area
Do not disassemble, repair or modify the device at your own discretion.
The arbitrary modification is not covered under warranty. When any repair
required, please contact the customer service center.
If there is abnormal sound, smell or fume in the device, please unplug the
power cord immediately and contact the customer service center.
When the device isn’t used for a long time, the adaptor and memory card
can be removed and placed in dry environment.
When moving, please hand over the manual to new tenant for proper
usage of the device.
V1 .4
600110132 08 4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15

DNAKE 280M-S8 User guide

280M-S8
Brand
DNAKE
Model
280M-S8
Category
Security camera accessories
Type
User guide

DNAKE 280M-S8 is a versatile device offering a range of features for enhanced security and communication. With its 7" capacitive touch screen and built-in camera, you can easily monitor your surroundings and answer door calls. The 2-way audio allows for clear conversation with visitors, while the alarm system provides an extra layer of protection.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents