93L Br Fridge
Model: EBF95W
Redy? Let’s get strted.
QSG V1.1
@esatto.house @esatto.house
• When starting up for the rst time, keep
the refrigerator upright for 2 hours before
connecting it to power supply.
• Once the power is connected to the
appliance, set the thermostat knob to “Med”.
Give your refrigerator time to cool down
completely before adding food or drinks. It is
the best to wait 24 hours.
Note: Please refer to your User Manual Pages 9–10
for detailed installation instructions.
Installation Tips
Size (mm) / 472W x 450D x 850H
Energy Rating / 3.5 Stars
Warranty / 2 Years
Product Details Get in touch
Your Bar Fridge
We’re on socials!
Need help? Contact our friendly support team via
the contact details below.
Phone / 1300 11 4357
Email / support@residentiagroup.com.au
How was your Esatto experience?
Share your story at esatto.house/review
The thermostat controls are located on the upper
wall of your Bar Fridge interior. The temperature
settings are as follows;
• O : This turns the unit o
• Min: The warmest temperature setting
• Med: Normal operation (adequate for
most situations)
• Max: The coolest temperature setting
Note: Please refer to your User Manual Page 11 for
detailed operation instructions.
The Thermostat Controls
Small Door
Drain Tray
Steel Wire Shelves
Adjustable Foot
Door Storage
Thermostat Controls