• When starting up for the rst time, keep
the refrigerator upright for 2 hours before
connecting it to power supply.
• Once the power is connected to the
appliance, set the thermostat knob to “Med”.
Give your bar fridge time to cool down
completely before adding food or drinks.
It is the best to wait 24 hours.
Note: Please refer to your User Manual
Pages 10–12 for detailed installation instructions.
Installation Tips
Size (mm) / 470W x 492D x 837H
Energy Rating / 2 Stars
Warranty / 2 Years
Product Details Get in touch
Your Bar Fridge
Need help? Contact our friendly support team via
the contact details below.
Phone / 1300 11 4357
Email / support@residentiagroup.com.au
The thermostat controls are located on the upper
wall of your Bar Fridge interior. The temperature
settings are as follows;
• O : This turns the unit o
• Min: The warmest temperature setting
• Med: Normal operation (adequate for
most situations)
• Max: The coolest temperature setting
Note: Please refer to your User Manual Page 13 for
detailed operation instructions.
The Thermostat Controls
Freezer
Glass Shelves
Vegetable Crisper
Adjustable Foot
Door Storage
Thermostat Controls
QSG V1.0
WWW.SOLT.HOUSE ESSENTIALS FOR LIFE
87L Bar Fridge
Getting Started...