This little Quick Start Guide is
everything you need to start using your
EBF129S Bar Fridge, so you can kick
back, relax and chill out!
Your Bar Fridge
1. Thermostat Control
2. Chiller Compartment
3. Tempered Glass Shelves
4. Removable Defrost Pan
5. Door Storage Partitions
QSG V1.3 0723
www.esatto.house
Product Details
Dimensions (W, D, H mm) / 860 × 501 × 540
Capacity / 123L
Energy Rating / 2.5 Stars
Warranty / 2 Years
Register your Esatto product online for a free
additional year esatto.house/warranty
Get in Touch
Need help? Contact our friendly support team
via the contact details below.
Phone / 1300 11 4357
Email / support@residentiagroup.com.au
@esatto.house @esatto.house
Get ready to use your EBF129S
123L Bar Fridge
Installation Tips
• When starting up for the rst time, keep
the bar fridge upright for 2 hours before
connecting it to a power supply.
• When you install your appliance, set the
thermostat knob to position 3 for the rst
24–48 hours, after which you can set it to
the level that best suits your needs. It is best
to wait 24 hours before adding food.
Please refer to your user manual pages 9–10
for detailed instructions.
The Thermostat Controls
Your bar fridge has one control for regulating the
temperature. The temperature control is located
on the front of the bar fridge inside the cavity,
visible only when the door is open.
The dial positions are as follows;
→ ‘O’ deactivates the bar fridge’s power supply
→ 1–2 provide a moderately cool temperature
→ 3–4 are suitable for normal daily operation
→ 5–6 provide the coldest temperature, and are
recommended for use during hot Summer days
-
1
-
2
