Ten-Tec 277 Antenna Tuner is an inductive/capacitive network used for matching unbalanced 50-75 ohm output impedances of transmitters and transceivers to a variety of loads, both balanced and unbalanced. It operates over a frequency range of 1.8 to 30 MHz. It incorporates the universal Transmatch circuit and has a built-in SWR bridge and meter. The tuner can handle 100 watts of continuous power and 200 watts of intermittent power. It has a capacitor voltage rating of 1 kV and a toroid with 47 taps, 18 gauge silver plated wire on 2" diameter core.
Ten-Tec 277 Antenna Tuner is an inductive/capacitive network used for matching unbalanced 50-75 ohm output impedances of transmitters and transceivers to a variety of loads, both balanced and unbalanced. It operates over a frequency range of 1.8 to 30 MHz. It incorporates the universal Transmatch circuit and has a built-in SWR bridge and meter. The tuner can handle 100 watts of continuous power and 200 watts of intermittent power. It has a capacitor voltage rating of 1 kV and a toroid with 47 taps, 18 gauge silver plated wire on 2" diameter core.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
Ten-Tec 277 User manual
- Type
- User manual
- This manual is also suitable for
Ten-Tec 277 Antenna Tuner is an inductive/capacitive network used for matching unbalanced 50-75 ohm output impedances of transmitters and transceivers to a variety of loads, both balanced and unbalanced. It operates over a frequency range of 1.8 to 30 MHz. It incorporates the universal Transmatch circuit and has a built-in SWR bridge and meter. The tuner can handle 100 watts of continuous power and 200 watts of intermittent power. It has a capacitor voltage rating of 1 kV and a toroid with 47 taps, 18 gauge silver plated wire on 2" diameter core.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
