Multi-Contact M-1LR-GG Installation guide

  • Hello! I've reviewed the datasheet for the XZGL-410 insulator from PEWA. This document provides essential information on the insulator's specifications, including its 1.0 mm² cross-section, diameter ranges, and assembly instructions. It also details how to properly fit the insulator parts. I'm ready to assist you with any questions you might have.
  • What is the minimum diameter of the insulator?
    What is the maximum diameter of the insulator?
    What is the recommended action when fitting the parts together?
Typ / Type
XZGL-410 1,0 mm
Max. Ø 3,9 mm
2
Min. Ø 3,4 mm
1,0 mm
Max. Ø 3,9 mm
2
Min. Ø 3,4 mm
MAH 557
index a
6.
!
Beim Zusammenstecken
der beiden Tüllenteile
leichten seitlichen Druck
ausüben und Einrasten
kontrollieren!
Lors de l'assemblage
des deux isolants,
exercer une légère
pression latérale et
contrôler le clipsage !
When fitting together the two
parts of the insulator, press
lightly together from the sides
and check that the parts
have engaged correctly!
MAH 557
/