2. Multi-Contact
  3. XZGL425SW

Multi-Contact XZGL425SW Installation guide

  • Hello! I've reviewed the datasheet for the XZGL-425 insulator. The document details the assembly process, emphasizing the need for light side pressure when joining the two parts. Also detailed are the insulator's dimensions, including its 2.5 mm² cross-section and minimum/maximum diameters. I'm ready to answer your questions about this product.
  • What is the recommended way to assemble the insulator?
    What are the minimum and maximum diameters of the insulator?
Typ / Type
XZGL-425 2,5 mm
Max. Ø 3,9 mm
2
Min. Ø 3,4 mm
2,5 mm
Max. Ø 3,9 mm
2
Min. Ø 3,4 mm
MAH 558
index a
6.
!
Beim Zusammenstecken
der beiden Tüllenteile
leichten seitlichen Druck
ausüben und Einrasten
kontrollieren!
Lors de l'assemblage
des deux isolants,
exercer une légère
pression latérale et
contrôler le clipsage !
When fitting together the two
parts of the insulator, press
lightly together from the sides
and check that the parts
have engaged correctly!
MAH 558
/