Aruba JL588A Reference guide

Brand: Aruba

Model: JL588A

Type: Reference guide

This manual is also suitable for

About the HPE FlexFabric 5710

Configuration Guides

Software version: Release 671x and later

Document version: 6W100-20230822

The information contained herein is subject to change without notice. The only warranties for Hewlett Packard

Enterprise products and services are set forth in the express warranty statements accompanying such

products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett

Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.

Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession, use, or

copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software

Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor’s

standard commercial license.

Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard

Enterprise has no control over and is not responsible for information outside the Hewlett Packard Enterprise

website.

Acknowledgments

Intel®, Itanium®, Pentium®, Intel Inside®, and the Intel Inside logo are trademarks of Intel Corporation in the

United States and other countries.

Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

Adobe® and Acrobat® are trademarks of Adobe Systems Incorporated.

Java and Oracle are registered trademarks of Oracle and/or its affiliates.

UNIX® is a registered trademark of The Open Group.

About the HPE FlexFabric 5710 configuration

guides

The HPE FlexFabric 5710 configuration guides describe the software features for the HPE

FlexFabric 5710 Switch Series, and guide you through the software configuration procedures. These

configuration guides also provide configuration examples to help you apply the software features to

different network scenarios.

Configuration guide

Content

Fundamentals Configuration Guide

Covers information about using the command line interface, logging in

to and setting up the device, and using the basic management

features.

This guide includes:

• CLI (command line interface overview and how to use the CLI).

• RBAC.

• Logging in to the device (login methods such as Telnet, and user

interface configuration and access control).

• FTP and TFTP.

• File system management.

• Configuration file management.

• Software upgrade.

• ISSU.

• GIR.

• Emergency shell.

• Automatic configuration.

• Preprovisioning.

• Device management.

• Tcl.

• Python.

Virtual Technologies Configuration

Guide

IRF creates a large virtual device from multiple devices. The IRF

member devices work in 1:N redundancy and appear as one unit in

the network. IRF improves management efficiency and streamlines

network topology. It is suitable for highly reliable enterprise networks

and data centers.

Configuration guide

Content

Layer 2—LAN Switching

Configuration Guide

Covers Layer 2 technologies and features used on a LAN switched

network, such as VLAN technology and port isolation. You can use

these features to divide broadcast domains, remove Layer 2 loops,

isolate users within a VLAN, or re-mark VLAN tags.

This guide includes:

• MAC address table and MAC Information.

• Bulk interface configuration.

• Ethernet interface.

• Ethernet link aggregation.

• DRNI.

• Port isolation.

• VLAN (including VLAN, super VLAN, private VLAN, and voice

VLAN).

• MVRP.

• Loopback, null, and inloopback interfaces.

• QinQ.

• VLAN mapping.

• Loop detection.

• Spanning tree.

• LLDP.

• L2PT.

• Service loopback group.

• Layer 2 forwarding.

Layer 3—IP Services Configuration

Guide

Covers IP addressing (including static and dynamic IPv4 and IPv6

address assignment), network performance optimization, ARP, and

interoperation between IPv4 and IPv6.

This guide includes:

• ARP (including ARP, gratuitous ARP, proxy ARP, ARP snooping,

ARP fast reply, and ARP direct route advertisement).

• IP addressing.

• DHCP (including DHCP overview, DHCP server, DHCP relay

agent, DHCP client, DHCP snooping, and BOOTP client).

• DNS and DDNS.

• IP forwarding basics and load sharing.

• Fast forwarding.

• Adjacency table.

• IRDP.

• IP performance optimization.

• UDP helper.

• Basic IPv6 settings.

• DHCPv6 (including DHCPv6 overview, DHCPv6 server, DHCPv6

relay agent, DHCPv6 client, and DHCPv6 snooping).

• IPv6 fast forwarding.

• Tunneling.

• GRE.

• HTTP redirect.

Configuration guide

Content

Layer 3—IP Routing Configuration

Guide

Covers the routing technologies for IPv4 and IPv6 networks of

different sizes, route filtering, route control, and policy based routing.

This guide includes:

• Basic IP routing.

• Static routing.

• RIP.

• OSPF.

• IS-IS.

• BGP.

• Policy-based routing.

• IPv6 static routing.

• RIPng.

• OSPFv3.

• IPv6 policy-based routing.

• Routing policy.

• DCN.

IP Multicast Configuration Guide

Covers Layer 2 and Layer 3 multicast protocols.

This guide includes:

• Multicast overview.

• IGMP snooping.

• PIM snooping.

• Multicast VLAN.

• Multicast routing and forwarding.

• IGMP.

• PIM.

• MSDP.

• Multicast VPN.

• MLD snooping.

• IPv6 PIM snooping.

• IPv6 multicast VLAN.

• IPv6 multicast routing and forwarding.

• MLD.

• IPv6 PIM.

ACL and QoS Configuration Guide

Covers information about classifying traffic with ACLs, and allocating

network resources and managing congestions with QoS technologies

to improve network performance and network use efficiency. You can

use ACLs to help feature modules (such as QoS and IP routing)

classify or filter traffic.

This guide includes:

• ACL.

• QoS (including QoS overview, QoS policy, priority mapping,

traffic policing, GTS and rate limit, congestion management,

congestion avoidance, traffic filtering, priority marking, nesting,

traffic redirecting, global CAR, class-based accounting, and

appendixes).

• Time range.

• Data buffer.

• QCN.

Configuration guide

Content

Security Configuration Guide

Covers security features. The major security features available on the

switch include: identity authentication (AAA and PKI), access security

(802.1X, MAC authentication, portal, and port security), secure

management (public key management, SSH, SSL, and IPsec), and

attack protection (IP source guard, ARP attack protection, uRPF,

attack detection and prevention, and ND attack defense).

This guide includes:

• AAA.

• 802.1X.

• MAC authentication.

• Portal.

• Web authentication.

• Triple authentication.

• Port security.

• User profile.

• Password control.

• Keychain.

• Public key management.

• PKI.

• SSH.

• SSL.

• Object group.

• Attack detection and prevention.

• TCP attack prevention.

• IP source guard.

• ARP attack protection.

• ND attack defense.

• uRPF.

• SAVI.

• SAVA.

• MFF.

• Crypto engine.

• FIPS.

High Availability Configuration

Guide

Covers high availability technologies and features available on the

switch for failure detection and failover. Failure detection technologies

focus on fault detection and isolation. Failover technologies focus on

network recovery.

This guide includes:

• Ethernet OAM.

• CFD.

• DLDP.

• RRPP.

• ERPS.

• Smart Link.

• Monitor Link.

• VRRP.

• BFD.

• Track.

• Process placement.

Configuration guide

Content

Network Management and

Monitoring Configuration Guide

Covers features that help you manage and monitor your network, for

example, manage system events, collect traffic statistics, sample

packets, assess network performance, and test network connectivity.

This guide includes:

• System maintenance and debugging (ping, tracert, and system

debugging).

• NQA.

• NTP and SNTP.

• PTP

• SNMP.

• RMON.

• Event MIB.

• NETCONF.

• Ansible.

• Puppet.

• Chef.

• CWMP.

• EAA.

• Process monitoring and maintenance.

• Mirroring (including both port and traffic mirroring).

• sFlow.

• Information center.

• Packet capture.

• VCF fabric.

• Performance management.

Telemetry Configuration Guide Covers gRPC fundamentals and configuration.

OpenFlow Configuration Guide Covers OpenFlow fundamentals and configuration.

VXLAN Configuration Guide Covers VXLAN fundamentals and configuration.

Intelligent Lossless Network

Configuration Guide Covers PFC fundamentals and configuration.

Aruba JL588A Reference guide

Brand: Aruba

Model: JL588A

Type: Reference guide

This manual is also suitable for

Download PDF

report

Aruba JL588A Reference guide

This manual is also suitable for

Aruba JL588A Reference guide

Related papers

Other documents