2. RC4WD
  3. Trail Finder 2 V8 Engine Mounts

RC4WD Trail Finder 2 V8 Engine Mounts Operating instructions

  • I've reviewed the fitting instructions for the TF2 V8 engine. This document details how to properly install the engine, including mounting and coupling procedures. I'm ready to help answer any questions you may have about the process outlined in the manual.
  • What is required before starting installation?
    What type of pin is used for the transfer case coupling?
TF2 & V8 Engine Fitting Instructions
Note: The TF2 chassis will need to be disassembled with the R3 transmission
removed before starting.
1 Attach mounts
2
RC4WD.com 1 TF2 & V8
M3 x 8mm
M3 x8mm
3 Fit Transfer case coupling
4 Attach transfer case mount
RC4WD.com 2 TF2 & V8
M3 driveshaft pin
M3 x 6mm
5 Attach to chassis rails
6
RC4WD.com 3 TF2 & V8
M3 x 8mm
M3 x 10mm
M3 x 12mm
M3 x 12mm M3 x 10mm M3 x 8mm
7 Fit transfer case
8
RC4WD.com 4 TF2 & V8
M3 x 8mm
M3 Driveshaft pin
/