Altronix AL125ULB Datasheet

Brand: Altronix

Model: AL125ULB

Category: Power adapters & inverters

Type: Datasheet

• The AL125ULB is a power limited power supply/charger that converts a low

voltage AC input into two individually PTC protected 12VDC or 24VDC

outputs (see specifications). They are intended for use in applications

requiring UL Listing for Access Control (UL 294) and applications

requiring an interface with Fire Alarm Control Panels.

• 12VDC or 24VDC selectable outputs.

• 1 amp total supply current.

• Two (2) Class 2 Rated power limited outputs.

• 24VAC/40VA.

• Filtered and electronically regulated output.*

• Built-in charger for sealed lead acid or

gel type batteries.

•

Maximum charge current: 400mA.

• Automatic switch over to stand-by battery

when AC fails.

• AC power and unit status indicator on the

front panel.

• “NO” trigger input.

• Supervised Fire Alarm Disconnect

(Latching w/reset or Non-Latching).

AL125ULB Switching Power Supply/Charger

Rev. DSAL125ULB - B03I

Overview

Specifications

UL Recognized component.

Agency Approvals

Board Dimensions (approximate)

3.1”W x 3.9”L x 1.4”H

*Note: When unit is powered by battery back up (AC Fail condition) the voltage range is 9.3V-13.2V and

19.55V

-26.4V for 12 and 24 volt operation respectively.

Mounting Diagram

3.0"

3.8"

0.48"

0.23"

2.8"

2.3"

Ø0.156"

Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com

1

Altronix AL125ULB Datasheet

Brand: Altronix

Model: AL125ULB

Category: Power adapters & inverters

Type: Datasheet

Related papers

Other documents