Pelco DX8100 Toolbar Buttons System User manual

Brand: Pelco

Model: DX8100 Toolbar Buttons System

Type: User manual

DX8100 TOOLBAR BUTTONS

DX8100_TOOLBAR_BUTTONS

Pelco and the Pelco logo are registered trademarks of Pelco.

Information subject to change without notification.

World Headquarters

3500 Pelco Way, Clovis, Calif ornia 93612 USA

USA & Canada Tel: 866/587-2503 Fax: 800/289-9150

International Tel: 1-559/348-5504 Fax: 1-559/348-1120

www.pelco.com

DX8100 TOOLBAR BUTTONS

Button Name Description

Live Enters the display mode and opens the DX8100 main window, where live and playback video is displayed:

• Live Mode: Allows all users to view live video.

• Playback Mode: Allows users with playback access rights (Standard User by default) and higher to

play back recorded video.

Search Enters the Search mode and opens the search window, providing access to search features. Users with

Standard User access and higher are allowed to search video data using specific criteria.

Setup Enters the setup mode and opens

the Setup dialog box to the Camera page (default view), and

allows access

to the other pages. Users with Power User

access and higher are allowed to set up the features and options

for the DVR.

Export Enters the export mode, where you configure the export options and parameters.

Print Enters the print mode, where you print the selected video image.

Single Division Displays one camera.

4 Division Displays four cameras at a time (quad display).

9 Division Displays nine cameras at a time.

16 Division Displays 16 cameras at a time.

25 Division Displays 25 images. Each DVR accommodates up to 32 cameras. You can display images from the local and

remote DX8100 DVRs.

36 Division Displays 36 images. Each DVR accommodates up to 32 cameras. You can display images from the local and

remote DX8100 DVRs.

6, 10, 13 Division Displays images as follows:

• 6 Division (1+5): One larger and five smaller images

• 10 Division (2+8): Two larger and eight smaller images

• 13 Division (1+12: One larger and 12 smaller images

Cycle Views Turns window cycling on and off. Automatically cycles through each view panel ensuring all cameras get

displayed. Group permission to change the dwell time is assigned by the Administrator to the following

groups: Restricted User Group, Standard User Group, and Power User Group. For information on cycle views

setup, refer to Automatically Cycling Through View Panels on page 28 of Manual C2630M.

Full Screen Selects a full-window view. The application window is expanded to occupy the entire monitor screen. Click

the right mouse button to exit full-screen view.

Connection List Opens the Connection List dialog box for adding sites to the Site tree.

Pelco DX8100 Toolbar Buttons System User manual

Pelco DX8100 Toolbar Buttons System User manual

Pelco DX8100 Toolbar Buttons System User manual

Related papers

Other documents